PicUntu-4.5-nand-BasicGUI installer - One file, few click install.

[linuxerwang]

Thanks! Look forward to the new 3.0.72+ kernel.

Hi, Alok

Are you sure rk3188_picuntu-4.4-MK802IV-AP6210_defconfig is the one you used to build the picuntu 4.5 kernel? At least the CONFIG_CMDLINE is not for NAND. I tried it and also tried tweak it with the mtdparts matching parameter file, but the kernels I built won't light up the monitor so I can't tell what's the problem. If you can share the exact config when you build 4.5 kernel, that will be awesome.

Thank you.

[aloksinha2001]

My internal wifi is not detected. Well I was able to use my wifi card in picuntu 4.4 distribution by a work around suggested by mmm123 by using command #echo 0bda 0179 > /sys/bus/usb/drivers/rtl8188eu/new_id in terminal but i can't try the same here as rtl8188eu folder is not present in /sys/usb/drivers/..
Loading module using #ismod /lib/module/rkwifi.ko also doesn't work....
Please help

It would not connect, its not meant for the rtl818eu device.

You should be able to use the 8188eu.ko files from the 4.4 distribtution on this as well.

Let me see, if I can get you the 8188eu.ko file...

Alok

[adeptus]

Adeptus,

This release includes Xfce4 desktop with an intent to keep the distribution to the minimal - (that is why it is called BASIC-GUI ) and that is why you are getting the entire distro in 247 MB. Having said that you can add any applet, utility - from the command line - apt-get install ... or using the synaptic software manager.

DM ?? You mean disk manager.. - gparted is built into the system, you can add any available from the system

The main: How to change the screen resolution???
The second: How to change Desktop Manager (f.ex. to KDE)?

[aloksinha2001]

There is half-fake, mans?!

1. No display resolutions other than 1900x1200!!! Where is a HD???
2. Display wallpapers not save after reboot. Joke?
3. No sound at all. Fake?
4. No Wi-Fi config tool.
4. No another DM other than one.

and more and more...

Adeptus,

This release includes Xfce4 desktop with an intent to keep the distribution to the minimal - (that is why it is called BASIC-GUI ) and that is why you are getting the entire distro in 247 MB. Having said that you can add any applet, utility - from the command line - apt-get install ... or using the synaptic software manager.

DM ?? You mean disk manager.. - gparted is built into the system, you can add any available from the system

Wifi config tool is wicdmanager. included in the boot up. Its found under internet - also it should have loaded and icon on the right hand corner.

The background is ofcourse changeable... thats the whole point of config... test it again... and let me know, if you see any errors...

What are you using to test the sound... as a standard test... check in Multimedia - Parole - Recent files . click ont the file used last.. it should play sound file.. or better.. from command line
speaker-test -c2
or
aplay /usr/share/sounds/alsa/Front_Center.wav

Trust it solves your issues.

Alok

[adeptus]

There is half-fake, mans?!

1. No display resolutions other than 1900x1200!!! Where is a HD???
2. Display wallpapers not save after reboot. Joke?
3. No sound at all. Fake?
4. No Wi-Fi config tool.
4. No another DM other than one.

and more and more...

[arcade]

1. rtl8188 will not work by default, as the default wifi module is conifgured to be as AP6210. You can try to insert the android driver - found in /lib/modules/
But I have found it the 8188eu to work nicely with native compile.

2. My bad - the kernel has missed the /proc/config support (Damn!) . I will have to update the posted kernels again... will do... in the meanwhile, Please let me know which config file you want to try on and I will send you the same.

Alok

Many thanks for your reply alok
if you can make nand kernel config for rtl8188
and share this with us. Yet how wonderful it was would you compiled a nand kernel with rtl8188 for us.

I tried the module from android but without success, When I put this module gets the answer :module insertion error.
Your kernel for sd card with rtl8188 works great.


Once again, many thanks.

[shaan_npl]

Please Help...

Yes.
Yes.

Alok

My internal wifi is not detected. Well I was able to use my wifi card in picuntu 4.4 distribution by a work around suggested by mmm123 by using command #echo 0bda 0179 > /sys/bus/usb/drivers/rtl8188eu/new_id in terminal but i can't try the same here as rtl8188eu folder is not present in /sys/usb/drivers/..
Loading module using #ismod /lib/module/rkwifi.ko also doesn't work....
Please help

[adeptus]

link is in top post
((Close on the heals of release of 4.4.3, we are happy to present PicUntu 4.5-nand-BasicGUI,))

Tnx! I'm stupid...

[linuxerwang]

link is in top post
((Close on the heals of release of 4.4.3, we are happy to present PicUntu 4.5-nand-BasicGUI,))
(http://www.g8.net/download/4.5/picun...sicgui-nand.7z)

i installed on t428 but is asking for password can some one post user password
thanks in advance

As always, password is "12qwaszx".

[main3dtv]

re download link

So, and where is the download link???

link is in top post
((Close on the heals of release of 4.4.3, we are happy to present PicUntu 4.5-nand-BasicGUI,))
(http://www.g8.net/download/4.5/picun...sicgui-nand.7z)

i installed on t428 but is asking for password can some one post user password
thanks in advance

[adeptus]

???

So, and where is the download link???

[zzmakii]

Is it only LCD0 that is required ?

Terminal command: dmesg shows the kernel is configured to LCDC0.
Push erase flash first then push write.

Sorry, I'm a noob, so don't know.
I did erase NAND first, then flash ROM, but still no activity on screen.

[linuxerwang]

Updated the config file on the github.

https://github.com/aloksinha2001/Linux3188/blob/master/arch/arm/configs/rk3188_picuntu-4.4-MK802IV-AP6210_defconfig

Alok

Thanks! Look forward to the new 3.0.72+ kernel.

[aloksinha2001]

Hi, Alok. I also want the config file. They only differ on HDMI, right? I don't care about HDMI, so can you please share with me any of them?

Thanks!

Updated the config file on the github.

https://github.com/aloksinha2001/Linux3188/blob/master/arch/arm/configs/rk3188_picuntu-4.4-MK802IV-AP6210_defconfig

Alok

[linuxerwang]

1. rtl8188 will not work by default, as the default wifi module is conifgured to be as AP6210. You can try to insert the android driver - found in /lib/modules/
But I have found it the 8188eu to work nicely with native compile.

2. My bad - the kernel has missed the /proc/config support (Damn!) . I will have to update the posted kernels again... will do... in the meanwhile, Please let me know which config file you want to try on and I will send you the same.

Alok

Hi, Alok. I also want the config file. They only differ on HDMI, right? I don't care about HDMI, so can you please share with me any of them?

Thanks!