Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
PicUntu-4.5-nand-BasicGUI installer - One file, few click install.
Collapse
X
-
Originally posted by leadermontanus View PostFirst of all, great work on this distro, it is really promising and it will be great once it gets more stable.
I have a 16GB Rikomagic MK802IV (after a couple of false starts it finally worked to flash it using "RK3188Loader(L)_V1.24.bin" as per the updated instructions).
However, after 2-5 minutes Linux always hangs, either accepting no input from keyboard/mouse, or as soon as you try to use keyboard all apps crash and I am left with the wallpaper. In either case I need to do turn the power off. Doing a soft reboot using Alt+Ctrl+Del restarts various services but fails to start the window manager again.
Annoyingly there is nothing in the logs, so the crash is pretty immediate... I am suspecting the Wifi at this point, it is flakier when using a browser to access the internet. I have tried all 3 desktop environments and different browsers, no difference. This happens with no extra files installed, immediately after installing Picuntu. Have also tried to turn wifi off and not logging in, just leaving it at the login prompt, again no difference...
I am attaching the dmesg output as a start in case it can help someone to shed a light on this, happy to help with anything I can do to track this down...
[ATTACH]3597[/ATTACH]
A- did u try another power supply?
- did u erase the NAND before flasing picuntu?
- what is the external connection?usb s?
- does it behave the same way using android(NAND) and picuntu(SD card)?
1. in my past expirience, wif Rpi and ug802, using barely adequate / faulty power suply can cause eratic behaviour.
myne was faulty PSU, after swithing it with my phone charger, everything behave normaly,
2, im not sure if it is even possible, but couldnt hurt to ask.
3. peripherals (keyboard, mouse, hub, etc...) can (rarely) causes problem. try using other keyboard mouse and/or hub
4. if android and boot from sd does not cause any problem, it may have been the picuntu / faulty board itself.
lastly overheating can cause this problem too ( governor / OC kernel). i had this problem with my ug802 when i try increasing performance, via OC an performance governor without proper cooling/heatsink.
i also skim tru you dsmeg but cant say i found anything new that u havent already said.
Leave a comment:
-
Dear Friends,
Installed picuntu (works great) on MK908 V3.0 2013.05.13 unforunately it doesnt detect my Wifi/BT AP6210 combo?
I wish alteast wifi could work? Any instructions on how to enable or insert the driver (if its already present in picuntu distribution 4.5?)
Thanks for all hardwork
MK
Leave a comment:
-
I just add my voice; I want to turn my Minix Neo X5 (rt3066 based) in a linux server, so picuntu seems to be the way to go for me!
I am a bit a newbie in this field, but as I understand I have to recompile the kernel for rt3066, and select the modules corresponding to the chipsets inside the box, right?
Leave a comment:
-
Ok that's exactly the info I was after. So seeing as my box is 'production' I'm gonna have to wait until it gets a few more features.
Thanks
Leave a comment:
-
Originally posted by pantz View PostI'm ready to test this out on a Minix Neo X7 but wanted to get an idea on how successful it might be before diving in.
1. Should this run XBMC easily - i don't mind if it only supports 720p via CPU only - i just want it to be stable for pictures, music and streaming plugins like youtube.
2. I have the Minix Neo A2 air remote (as well as the tiny one that comes with the X7) and was wondering what the chances of either of them working with picuntu.
3. Network is also pretty important but if ethernet driver is supplied then I'm good.
Thanks
If you want XBMC on Linux look for AMlogic M3 devices capable of running xbmc with hw decoding and running under linux. They start from $64 usd.
Leave a comment:
-
I'm ready to test this out on a Minix Neo X7 but wanted to get an idea on how successful it might be before diving in.
1. Should this run XBMC easily - i don't mind if it only supports 720p via CPU only - i just want it to be stable for pictures, music and streaming plugins like youtube.
2. I have the Minix Neo A2 air remote (as well as the tiny one that comes with the X7) and was wondering what the chances of either of them working with picuntu.
3. Network is also pretty important but if ethernet driver is supplied then I'm good.
Thanks
Leave a comment:
-
CX-919 works great
Excellent job. Working great as a PC replacement on CX-919, much better than the MK808 and other dual-core with older Picuntu builds. Had to use RKAndroidTool v1.37 (Loader Ver: 1.22) for it to see the device and flash the ROM. USB-Ethernet adapter worked at first, but now is not listed. HDMI audo works great, but haven't been able to get a USB headset to work (shows in list, but no sound.) Neither is a show stopper for the business use case.
Overall seeing about 60% performance improvement for business usage (browser, LibreOffice, Thunderbird) over RK3066 devices and Picuntu 0.9 RC 2.2 (device testing and roundup HERE, following up with OS and applications notes after a little more burn-in using Picuntu 4.5 in a Part 2: Applications next week.)
Thanks Picuntu Team!
Leave a comment:
-
RTC ISSUES
Originally posted by arcade View PostHi all great thanks for the great job .
Terminal command: dmesg shows the kernel is configured to LCDC0.
Push erase flash first then push write.
I have another question.
I have a rtl8188 wifi does not work
Kernel config / proc / config.gz file not found.
It may be somewhere else have any suggestions welcome.-
.
Thank you for your hard work on continous work on RK devices.
Leave a comment:
-
MK802IV hanging after 2-3 minutes
First of all, great work on this distro, it is really promising and it will be great once it gets more stable.
I have a 16GB Rikomagic MK802IV (after a couple of false starts it finally worked to flash it using "RK3188Loader(L)_V1.24.bin" as per the updated instructions).
However, after 2-5 minutes Linux always hangs, either accepting no input from keyboard/mouse, or as soon as you try to use keyboard all apps crash and I am left with the wallpaper. In either case I need to do turn the power off. Doing a soft reboot using Alt+Ctrl+Del restarts various services but fails to start the window manager again.
Annoyingly there is nothing in the logs, so the crash is pretty immediate... I am suspecting the Wifi at this point, it is flakier when using a browser to access the internet. I have tried all 3 desktop environments and different browsers, no difference. This happens with no extra files installed, immediately after installing Picuntu. Have also tried to turn wifi off and not logging in, just leaving it at the login prompt, again no difference...
I am attaching the dmesg output as a start in case it can help someone to shed a light on this, happy to help with anything I can do to track this down...
dmsg.txt
A
Leave a comment:
-
Originally posted by Daimonion View PostAlok have you plans to realease an easy instalation like this one for 3066 devices?
I havent tryed any picuntu release before because I find them hard to install, and now there is the easy installation I was always hoping for but it does not support 3066...
I have installed picuntu 4.5 on mk808 flashing kernel 3.0.8 of linuxium with driver nand and loader of rk3066...It work but the version of kernel and version of system are different.
I'm trying to compile kernel 3.0.36 with nand for rk3066 device, but i'm not expert and i failed until now.
if there are a kind soul who compile the kernel we may have a picuntu 4.5 work on our device.
Leave a comment:
-
Originally posted by maxchen View PostI try to my FT232 USB UART work ,recompile a kernel from omegamoon's source with this evice Drivers ---> [*] USB support ---> USB Serial Converter support ---> USB FTDI Single Port Serial DriverAfter plug the FT232 in, no /dev/ttyUSBx show up, but lsusb can see FT232.Any idea ?thanks
another problem is bluetooth not work in linux.hcitool dev show nothing.And when I try to compile bluetooth support to bluetooth.ko, error say GetSNSectorInfo undefined in vflash.c.
Leave a comment:
-
Alok have you plans to realease an easy instalation like this one for 3066 devices?
I havent tryed any picuntu release before because I find them hard to install, and now there is the easy installation I was always hoping for but it does not support 3066...
Leave a comment:
-
Originally posted by aloksinha2001 View PostMrED - why not try this out... you have the config file and you can pretty much use the compiler to compile a kernel for yourself.
It will be nice to find out if you get the LXC to work - in all probabilities, it should work... but unless one tests this, one cannot be sure.
Alok
I checked the .config file that you are using, and am curious, if my assumtions are correct. I do not have RK3188 device yet, but I guess LXC should work in your build with no changes. Could you try:
Code:apt-get install lxc lxc-checkconfig
Leave a comment:
-
How to my FT232 USB UART work ?
I try to my FT232 USB UART work ,recompile a kernel from omegamoon's source with this evice Drivers ---> [*] USB support ---> USB Serial Converter support ---> USB FTDI Single Port Serial DriverAfter plug the FT232 in, no /dev/ttyUSBx show up, but lsusb can see FT232.Any idea ?thanks
Leave a comment:
What's Going On
Collapse
There are currently 2338 users online. 8 members and 2330 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Leave a comment: