Help to restore MXQ 4 PRO rk3228/9

[JaV1]

Hi!!

I need help!!

I need a firmware to restore a "cheaply" MXQ PRO 4K ( 1g/8g )




---

I've tried with more than 30 different images and none worked. Could someone help me resuscitate her?

Thanks!!

[gefattern]

Hi ,

you bought a shitty Box , your PCB says it is RK3229 , but CPU says RK3228A ,

look here :

https://forum.xda-developers.com/android-stick--console-computers/rockchip/mxqpro-rk3228a-help-please-t3866643

https://forum.freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3328-devices/724608-mxq-pro-4k-with-rk3228a

i think it is RK3229 compatible only named with other Number , maybe the

ATVExperience Rom works , you must search long for this shitty Boxes ,

further good luck / gefattern

[tomsavini]

good look :-D you have error of red light or IDB fail?


If not, you're doing very well.

[JaV1]

good look :-D you have error of red light or IDB fail?


If not, you're doing very well.

no, i dont have red ligth, i dont have any ligth, jaja....

only work with a SD card
But I dont find a firmware to install, all firmware have a error for me,
I try Tx2, v88, leelbox, zidoo...

[tomsavini]

try to make a bridge between E and G.
* have the same error as I IDB FAIL?
* can you access the recovery mode?
* where did you buy the tv box?

[tomsavini]

Hi ,

you bought a shitty Box , your PCB says it is RK3229 , but CPU says RK3228A ,

look here :

https://forum.xda-developers.com/android-stick--console-computers/rockchip/mxqpro-rk3228a-help-please-t3866643

https://forum.freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3328-devices/724608-mxq-pro-4k-with-rk3228a

i think it is RK3229 compatible only named with other Number , maybe the

ATVExperience Rom works , you must search long for this shitty Boxes ,

further good luck / gefattern

hello could you help me in my post is another shit box T.T

[gefattern]

hello could you help me in my post is another shit box T.T

Hi ,

what is your Problem ???

greetings / gefattern

[JaV1]

i cant find firmare, I dont have any ligth

[tomsavini]

i cant find firmare, I dont have any ligth

I resigned the device after the first failed firmware installation I always found idb fail. It is best to invest a little more and buy a x96 max (the only problem such as hiding the root) or Beelink GT1 has support and should be able to be unrooted or hidden easily try to found you firmware in this page https://chinagadgetsreviews.com/down...4k-tv-box.html

good luck!

[Frederico.Costa]

Hello, can anyone tell where I do Mask ROM Mode Short Location for this PCBA? Thank you!

[Frederico.Costa]

no, i dont have red ligth, i dont have any ligth, jaja....

only work with a SD card
But I dont find a firmware to install, all firmware have a error for me,
I try Tx2, v88, leelbox, zidoo...

Hello, How do you access BootLoader through SDCard, I have the same problem, my box is the same PCBA and does not turn on any light, I put a firmeware and got bricked. Help please! Thank you.

[JaV1]

Hello, How do you access BootLoader through SDCard, I have the same problem, my box is the same PCBA and does not turn on any light, I put a firmeware and got bricked. Help please! Thank you.

Spanish
Hola federico, Solo hay algunos firmware que funcionan con esta placa por SD, pero solo intentan arrancar, pero nunca terminan funcionando, se quedan como en el recovery intentando flashear.

yo he probado con el firmware de TANIX T2, y alg?n otro con versi?n de android 7.0 y 7.1, pero ninguna arranca, y adem?s tengo otro aparato exactamente igual, al que le he extra?do el firmware, pero no se como empaquetarlo para poder flashearlo despues, porque el androidtools siempre me da problemas al intentar hacerlo por partes.


English:

Hi Federico, There are only some firmware that work with this board for SD, but they only try to boot, but they never end up working, they stay as in the recovery trying to flash. I have tested with the firmware of TANIX T2, and some other with Android version 7.0 and 7.1, but none starts, and I also have another device exactly the same, to which I have extracted the firmware, but I do not know how to package it to be able to flash it later , because the androidtools always gives me problems when trying to do it in parts.



Original:

[Frederico.Costa]

Spanish
Hola federico, Solo hay algunos firmware que funcionan con esta placa por SD, pero solo intentan arrancar, pero nunca terminan funcionando, se quedan como en el recovery intentando flashear.

yo he probado con el firmware de TANIX T2, y alg?n otro con versi?n de android 7.0 y 7.1, pero ninguna arranca, y adem?s tengo otro aparato exactamente igual, al que le he extra?do el firmware, pero no se como empaquetarlo para poder flashearlo despues, porque el androidtools siempre me da problemas al intentar hacerlo por partes.


English:

Hi Federico, There are only some firmware that work with this board for SD, but they only try to boot, but they never end up working, they stay as in the recovery trying to flash. I have tested with the firmware of TANIX T2, and some other with Android version 7.0 and 7.1, but none starts, and I also have another device exactly the same, to which I have extracted the firmware, but I do not know how to package it to be able to flash it later , because the androidtools always gives me problems when trying to do it in parts.



Original:

Hello,

I did a search and also did not find the correct rom for TV box.
I did a Firmware upgrade to V88 and it worked, but without Wifi.
Have you tried backup your Firmware with TWRP? When you're new, let me know.

Thanks,

[JaV1]

Hello,

I did a search and also did not find the correct rom for TV box.
I did a Firmware upgrade to V88 and it worked, but without Wifi.
Have you tried backup your Firmware with TWRP? When you're new, let me know.

Thanks,

Can you send me the v8 firmware and say me what program use for it.

i have a backup with Rockchip dumper ... if do you want, i can upload this

[Frederico.Costa]

Can you send me the v8 firmware and say me what program use for it.

i have a backup with Rockchip dumper ... if do you want, i can upload this

Can you send me the v8 firmware and say me what program use for it.

-Link is there, however, does not work Wifi ..

https://chinagadgetsreviews.com/download-android-7-1-2-stock-firmware-for-scishion-v88-tv-box.html

i have a backup with Rockchip dumper ... if do you want, i can upload this

-Yes, I do, waiting. thank you.