[ROM] Beelink GT1 Standard & Ultimate Android (7.1.2) ALVATECH (Both 6255 & 9377)

[ALVATECH]

Hi i've installed this image with usb burning tool 2.0.9 but now after the boot screen Alvatech, i've a black screen and after a restart nothing.
i can't also access anymore to the recovery with the reset pin
is there a way to reinstall the recovery?

Thanks

The best thing I could tell you is to make sure you are putting the right ROM on your box. Make sure SN on box matches the proper ROM. Also maybe try using a newer USB Burning Tool 2.1.7.0 and then try to flash again. If you can't load Android OS and can't boot into recovery then best thing to do is to re-flash the box again.
Thank you,

Alvatech

[icekrim]

Hi i've installed this image with usb burning tool 2.0.9 but now after the boot screen Alvatech, i've a black screen and after a restart nothing.
i can't also access anymore to the recovery with the reset pin
is there a way to reinstall the recovery?

Thanks

[ALVATECH]

Hello,

Where I can see my SN?

My GT1 is a classic one S912 16GB.

I do not have any sticker to get the SN?

I see only in the parameter : GT1_106MO

Can I use this ROM?

Hello,
I can't tell you for sure but it looks like you have an older GT1-Ultimate box with Android 6. Usually there would be a sticker on the bottom of your box with a serial number. Then you can compare to the first post to find out if you can install the ROM. But from what I could tell it looks like this ROM would be the one that would work for this box, But this is something you would have do at your own risk. You could always go to Beelink's site and ask for help to identify your box. If you decide to flash your box, you would need to use the USB Burning Tool since you'll be upgrading from Android 6 to 7. This is the only method that can be done when upgrading from 6 to 7, the SD-Card method can not be used.
Thank you,

Alvatech

[cool31]

Hello,

Where I can see my SN?

My GT1 is a classic one S912 16GB.

I do not have any sticker to get the SN?

I see only in the parameter : GT1_106MO

Can I use this ROM?

[ALVATECH]

Hello,

I already flashed GT1_708N0_AT_V1A earlier. May I know how can I update to this version? My box went to TWRP each time I start the box with reset button clicked (for SD card method).

Hello,
Please make sure you format the card with the Burn Card Maker when you prepare SD-Card. Now, If you made the SD-Card with the Burn Card Maker properly, then keep the box turned off while you plug in HDMI cable and put in the SD-Card into the box. Then plug in power cord into box while holding down the reset button on the bottom of the box. Make sure as soon as you see the Android logo with status bar at bottom let go of the reset button. If for some reason you don't see anything at all just leave the SD-Card in the box and wait for about 15 min to be safe and it should automatically restart if you setup your SD-Card this way. There is an option for reboot, make sure that the check box is checked when making an SD-Card image. If you like you can PM me for some more help if needed.
Thank you,

Alvatech

[hafizrazak]

Hello,

I already flashed GT1_708N0_AT_V1A earlier. May I know how can I update to this version? My box went to TWRP each time I start the box with reset button clicked (for SD card method).

[ALVATECH]

My box is Beelink GT1 Ultimate (Starting SN: A706D)
i can flash this rom "[ROM] Beelink GT1 Standard & Ultimate Android (7.1.2) ALVATECH (Both 6255 & 9377)" => GT1_709N0_AT_V3A

Thank you

Regards,

Hello,
If your SN is A706D then the ROM you want to install is at the link down below. Please read the entire first post of every ROM at the least so you can get a little more info that can help you.
Thank you,

Alvatech

Link:

https://forum.freaktab.com/forum/tv-player-support/beelink-aa/beelink-android-tv-box/gt1-ultimate/firmware-roms-tools-ch/778507-rom-beelink-gt1-ultimate-android-7-1-2-alvatech-some-newer-boxes

[RiCkLaR_atvX]

My box is Beelink GT1 Ultimate (Starting SN: A706D)

That is just the firmware build number = A706D

Look for the SN = "serial number" on the bottom of the box. And read the first page very carefully again. If your Serial Number has incorrect prefix, then use one of the other versions of firmwares made by ALVATECH made for this box.

[ang89gunner]

My box is Beelink GT1 Ultimate (Starting SN: A706D)
i can flash this rom "[ROM] Beelink GT1 Standard & Ultimate Android (7.1.2) ALVATECH (Both 6255 & 9377)" => GT1_709N0_AT_V3A

Thank you

Regards,

[ALVATECH]

Wow, it's really an amazing firmware.

Question, how can I change audio output to SPDIF?
I tried to chamge the option in droid settings to spdif raw, but still the sound goes through hdmi.

Hello,
Thank you!! I'm thinking it should automatically all kind of kick in as needed when using a surround sound or something that uses SPDIF. I don't personally own anything with SPDIF so I haven't worked with it. I do know other users have used this ROM with SPDIF. Maybe someone else here who has can answer you better.
Thank you,

Alvatech

[nodymoha]

Wow, it's really an amazing firmware.

Question, how can I change audio output to SPDIF?
I tried to chamge the option in droid settings to spdif raw, but still the sound goes through hdmi.

[ALVATECH]

Very Cool !...

Runs perfekt on my CSA93Q 3/32,...but.... i got no clockdisplay.

I tried the on you postet in the Ultimate N1 Version,..nothing, freeze ^^.

and the most of this one:

https://mega.nz/#F!5o5B0SII!p-W0crI8UbegQNA80vKSzQ!x9YXRIxD

Nothing,...freeeeze ^^

can please send me a link or an zip to solve this ?!?

Great Job and thank you a lot.

Sorry, I don't own this box (CSA93Q 3/32) and I don't have original ROM. This makes it difficult to make a patch for this box without it physically in hand.
Thank you,

Alvatech

[AuXiLiAtOr]

Very Cool !...

Runs perfekt on my CSA93Q 3/32,...but.... i got no clockdisplay.

I tried the on you postet in the Ultimate N1 Version,..nothing, freeze ^^.

and the most of this one:

https://mega.nz/#F!5o5B0SII!p-W0crI8UbegQNA80vKSzQ!x9YXRIxD

Nothing,...freeeeze ^^

can please send me a link or an zip to solve this ?!?

Great Job and thank you a lot.

[tinkleo]

Cool!

[ALVATECH]

Hi,

Can I upgrade my GT1 from Android 6.0 to this firmware with TWRP recovery?

Hello,
when you upgrade from Android 6 to Android 7 you need to use USB cable to flash your box.
Thank you,

Alvatech