[ROM] Beelink GT1 Standard & Ultimate Android (7.1.2) ALVATECH (Both 6255 & 9377)

[claude97419]

Hello,
I have put a link down below for the ROM that should be compatible for your box.
Thank you,

Alvatech

Link to ROM:
https://forum.freaktab.com/forum/tv-...me-newer-boxes

Many thanks.
I'll give you feedback quickly

[ALVATECH]

Hi ALVATECH,

I’m very interested by your Rom.
I have checked the following information on my Box.
I have Beelink GT1 Ultimate, board q201, Amlogic S912, OTA Android version 7.1.2, factory pre-rooted, 3gb memory 32gb internal storage, S/N B706DBGG81044.
Currently running Android 7.1.2,
Build ID q201-userdebug7.1.2 NHG47L 20180702.
Build finger print : Beelink/q201/q201 :7.1.2/NHG47L/20180702

Will this rom work? Otherwise which rom will work?

Thanks

Hello,
I have put a link down below for the ROM that should be compatible for your box.
Thank you,

Alvatech

Link to ROM:

https://forum.freaktab.com/forum/tv-player-support/beelink-aa/beelink-android-tv-box/gt1-ultimate/firmware-roms-tools-ch/778507-rom-beelink-gt1-ultimate-android-7-1-2-alvatech-some-newer-boxes

[claude97419]

Hi ALVATECH,

I’m very interested by your Rom.
I have checked the following information on my Box.
I have Beelink GT1 Ultimate, board q201, Amlogic S912, OTA Android version 7.1.2, factory pre-rooted, 3gb memory 32gb internal storage, S/N B706DBGG81044.
Currently running Android 7.1.2,
Build ID q201-userdebug7.1.2 NHG47L 20180702.
Build finger print : Beelink/q201/q201 :7.1.2/NHG47L/20180702

Will this rom work? Otherwise which rom will work?

Thanks

[Vincs]

Hi. Can`t remenber well, but it is on options, something to do with always ON when plugged to Power.....

Found it!

Setup - Developper Option - Stay Awake, screen will never sleep while charging - ON!

I hope it did help!

Thanks ! I found it :-)

[ALVATECH]

Hi. Can`t remenber well, but it is on options, something to do with always ON when plugged to Power.....

Found it!

Setup - Developper Option - Stay Awake, screen will never sleep while charging - ON!

I hope it did help!

Thanks for sharing!

Alvatech

[Mordor]

Hi. Can`t remenber well, but it is on options, something to do with always ON when plugged to Power.....

Found it!

Setup - Developper Option - Stay Awake, screen will never sleep while charging - ON!

I hope it did help!

[Vincs]

ALVATECH:

I found the hidden opçion to always be turned ON when plugged.

No more problems of loosing conection. I even can`t imagine why isn`t that option always ON by default....anyway....PERFECTION ACHIVIED!!

Thank you very much!!

Hi !
Can you tell where it was ? Thanks ;-)

[ALVATECH]

ALVATECH:

I found the hidden opçion to always be turned ON when plugged.

No more problems of loosing conection. I even can`t imagine why isn`t that option always ON by default....anyway....PERFECTION ACHIVIED!!

Thank you very much!!

I'm glad you found it, that's awesome! I figured the option would be there but since I don't have that box anymore and it's an older ROM I couldn't remember where exactly.
Thank you,

Alvatech

[Mordor]

ALVATECH:

I found the hidden opçion to always be turned ON when plugged.

No more problems of loosing conection. I even can`t imagine why isn`t that option always ON by default....anyway....PERFECTION ACHIVIED!!

Thank you very much!!

[ALVATECH]

ALVATECH : many many thanks for your good job!!! Today I flashed my box (Beelink GT1 Ultimate) with your ROM and I am fully satisfied now. The official ROM from Beelink was plenty of buggy behaviors, now with your ROM works all perfectly, the possible BT and WI-FI issues are not a problem for me, 'cause I don't really need these 2 features. One more time, many many thanks!!!

All the best and happy new year!

I really appreciate the positive feedback
Thank you,

Alvatech

[plao]

ALVATECH : many many thanks for your good job!!! Today I flashed my box (Beelink GT1 Ultimate) with your ROM and I am fully satisfied now. The official ROM from Beelink was plenty of buggy behaviors, now with your ROM works all perfectly, the possible BT and WI-FI issues are not a problem for me, 'cause I don't really need these 2 features. One more time, many many thanks!!!

All the best and happy new year!

[izzy1971]

I don’t use CoreElec so something might be missing on the SDCard or something else might be happening. Your best bet is to ask on a CoreElec forum for additional help on that subject. As for you trying to re-flash your box you may need to uninstall and reinstall the USB Burning Tool, try a different USB port, USB cable or try another computer. This usually helps. I’ve had issues before when I try to flash boxes again and sometimes it doesn’t want to work. So I do the options I had mentioned and those usually work.
Thank you,

Alvatech




Like I’ve mentioned in the past I had all my posts / threads deleted and it’s hard for me to reference certain things that were helpful in the past. I also no longer have this box and this is one of my oldest ROMs. I do not plan on any more releases for this box. I do know some of these boxes depending on WI-FI chipset had issues with Bluetooth and WI-FI. On the first the first post of this thread I had added a patch for Bluetooth that may and may not work for you.You can reference the link down below on a fix that I once did on one of these boxes that did help, which was solder a couple of wires to the internal WI-FI antenna which helped with reception. Also this box is not built for anything newer than Android 7 so there won’t be any further development done on this box. So no this box doesn’t support anything newer. I’ve also seen you posted on other threads the exact same question. Some of the reasons these boxes don’t work with other apps such as Disney + is because they’re rooted and not certified. So there’s not much I can do about that.
Thank you,

Alvatech

link for WiFi fix:

https://forum.freaktab.com/forum/tv-player-support/beelink-aa/beelink-android-tv-box/gt1/734060-gt1-wifi-dropping-antenna-fix

ALVATECH Thanks for your prompt response. understood. I did not think that there was a huge difference between the amlogic S912 and S905 which you built the PIE 9.0 rom. thats why i ask. The wifi issue is an inconvennience but i can get by. i just reboot the box each time i first use it. after that it worked until box goes to sleep. the other audio issue oh well!! for the most part the Rom is stable. Thanks for your support

[ALVATECH]

hi ALVATECH, first of all thanks for your beautiful ROM.
I'm using it, but now i've a problem. I'd like to try coreelec, but when i try to boot from microsd your logo stuck on tv and led on box is off.
I've tryed with toothpick method and other app, but nothing changed.
I've also tryed to flash an other ROM, but i get erase bootloader error.
Looks like your rom now it's unerasable.
Do you have any suggestion?
Thanks

I don’t use CoreElec so something might be missing on the SDCard or something else might be happening. Your best bet is to ask on a CoreElec forum for additional help on that subject. As for you trying to re-flash your box you may need to uninstall and reinstall the USB Burning Tool, try a different USB port, USB cable or try another computer. This usually helps. I’ve had issues before when I try to flash boxes again and sometimes it doesn’t want to work. So I do the options I had mentioned and those usually work.
Thank you,

Alvatech

ALVATECH Could you tell me if you intend releasing a version of (9.0 pie) on GT1 S912. Having a lot of issue with this 7.1.2 of rom running on original GT1 (bluetooth audio buggy and also disney + audio isn't working.., need to reboot box each time for wifi to work..)

as always appreciate all your effort. will definetly donate!

Like I’ve mentioned in the past I had all my posts / threads deleted and it’s hard for me to reference certain things that were helpful in the past. I also no longer have this box and this is one of my oldest ROMs. I do not plan on any more releases for this box. I do know some of these boxes depending on WI-FI chipset had issues with Bluetooth and WI-FI. On the first the first post of this thread I had added a patch for Bluetooth that may and may not work for you.You can reference the link down below on a fix that I once did on one of these boxes that did help, which was solder a couple of wires to the internal WI-FI antenna which helped with reception. Also this box is not built for anything newer than Android 7 so there won’t be any further development done on this box. So no this box doesn’t support anything newer. I’ve also seen you posted on other threads the exact same question. Some of the reasons these boxes don’t work with other apps such as Disney + is because they’re rooted and not certified. So there’s not much I can do about that.
Thank you,

Alvatech

link for WiFi fix:

https://forum.freaktab.com/forum/tv-player-support/beelink-aa/beelink-android-tv-box/gt1/734060-gt1-wifi-dropping-antenna-fix

[izzy1971]

ALVATECH Could you tell me if you intend releasing a version of (9.0 pie) on GT1 S912. Having a lot of issue with this 7.1.2 of rom running on original GT1 (bluetooth audio buggy and also disney + audio isn't working.., need to reboot box each time for wifi to work..)

as always appreciate all your effort. will definetly donate!

[bellerofonte_chimera]

hi ALVATECH, first of all thanks for your beautiful ROM.
I'm using it, but now i've a problem. I'd like to try coreelec, but when i try to boot from microsd your logo stuck on tv and led on box is off.
I've tryed with toothpick method and other app, but nothing changed.
I've also tryed to flash an other ROM, but i get erase bootloader error.
Looks like your rom now it's unerasable.
Do you have any suggestion?
Thanks