[ROM] Beelink GT1 Standard & Ultimate Android (7.1.2) ALVATECH (Both 6255 & 9377)

[cheerious]

hello, i have a beelink gt1 2+32gb, can it do Chromecast? by any chance?

[webipsum]

You can try this for https://androidfilehost.com/?fid=14943124697586373220 GT Beelink Standard devices.

supercool

Grateful for the tip.
Do you have the GT1 Ultimate with the firmware you indicated?
I'm not able to run 100% the Prime Video app.
Once again: Thank you!

[moonlightzzz]

Thanks, I guess.
I've using the ROM in this post, I said I only seen one crash but after publish the above reply, I've been getting one crash here and there, and I believe the tv box has some sort of problem. I don't think it's the CPU because AIDA64 reports <50 degress celsius and eMMC is probably fine as well along with RAM. The random crashes really annoying.

[supercool]

You can try this for https://androidfilehost.com/?fid=14943124697586373220 GT Beelink Standard devices.

[webipsum]

ALVATECH
Congratulations on your firmware.
I currently use firmware GT1_707N0_AP6255 on my GT1 ULTIMATE (S/N: AX12GSL...).
I understand that your firmware is suitable for my box, correct?
I saw it's AOSP. Do you also have an ATV version?
Thank you very much.

[moonlightzzz]

Hi there,
I had bought a Beelink GT1 Ultimate with S912 chipset and 3gb ram and 32gb rom, serial starting A3DE. Since purchasing until now, I got tired of the system was constantly having crashes, no sure yet if it is hardware related, and changed lighthome to launcher3 etc etc which mitigated crashes. Then randomly searched for updated rom version, my box already had 709n0 and went for Manjaro ARM etc which has lots of graphical glitches unless it is my tv which doesnt seem to handle interpolated full hd.
Moving on, then I found a post someone looking for the rom of the current version and not finding it and someone gave thel ink for this thread and I decided to try to check out it on my box. Downloaded the 7z, extracted, read the rest of the post for instructions for sd card installation since the box was running android 7.1.2. I took somehow to realise that I would need to press the reset button when inserting the power lead.and release it when the android robot logo and the progress bar was showing on the screen.
The installation took some time and the post-installation too, then it just asked me what launcher I want to use, I'm more familiarized with launcher3 but I will try the other launchers at some point.
So far I had just one crash, maybe it was play store being updated. So far seems ok.
My question most urgent is... is it possible to turn the Settings into a dark mode? Now it is white but I don't like white.
Thanks in advance.

[fluffier]

Hello,

I am new to this so forgive me if what I say makes no sense.

I have beelink gt1 with serial number S912.... but currently the build number is GT1 _110M0 (it doesnt end in "N0" as stated in the first post). Can I still flash this rom ?

The android version I have is 6.0.1 which means I have to use Amlogics burning tool, and so I need to connect the tv box to the computer with a usb to usb cable which I dont have. So my question is this, can i upgrade the firmware to android 7, using official firmwares and then use the SD card method to flash this rom? If so where could I find the official firmwares?

If i try the online update tool that come with the official firmware it says there are no new firmwares.


Thanks!

[mh1983]

Anyone have a way of getting around Amazon Prime being such a low resolution? I have a few streaming services on my GT1. Some are not fully HD but they all work nicely enough, apart from Prime. By far, it has the worst resolution. I'm hardwired into our fast home network and I have the latest updates. Is it a limitation and are there any solutions? Thanks!

[jebaga]

Alvatech rom not work on my box.
Instal superceleron v11 from usb and work.

[mh1983]

Sorry to hear you haven't been able to install the rom on your dad's GT1.

It took me awhile to install this rom using the USB Burning Tool method, but it eventually worked. i think I tried a few different versions. Maybe try the latest one? Of course, cleanly uninstall the version on your computer before you try a new version.

The timing of plugging in the box and running the rom install was key, if I recall correctly. Try selecting the rom, clicking "Start", and THEN quickly plug in your box in recovery mode. Hope that helps and if not, hopefully someone else can post some other suggestions. Patience and persistence is key. Good luck!

EDIT: And yes, AFAIK, this is the latest rom for the box. It's a really good one, so well worth getting up and running!

[Nitropt]

Hello i found my Dad have a beelink GT1 S/N:G912BSJF00052 16G android 7.1.2 firmware 708N0 and need some help to install this rom this my first time and i can´t find what im doing wrong.

By some reading i thing this rom can be install on my box. I will explain the max i have done and the errors i found.
1 - dowload this rom GT1_709N0_AT_V3A
2 - dowload the USB Burning Tool Method 2.1.7.1 and SD Card Method 2.0.2
3 - install the usb burning tool
3.1 - open as admin load the rom - ok
3.2 - with the box turn off and with the usb cable (usb 3.0) link on the PC and link in the box usb plug near of the sd slot
3.3 - press the the recovery button and keep, power on the box and the box goes to android system and the usb burning tool doesn´t find the box. Even i press start on the burning tool nothing seem to happen.

using the SD card
open the app has admin open the img.
1 - choose the usb pen drive
2 - check the fields - partition and format, erase-bootloard, erase_flash (normal) and reboot
3 - press make
and i get error7 and L(0986) fail to partition the disk

format the usb in fat32 and make again a new test with out partition and format and i get a new error L(1041) check uboot file after read failed£.

i can´t make the install of the rom.

this is the last rom made for this box or there is a new one? since i make the update i wish to install the last one.

thanks

[mh1983]

Thank you. Yeah, ethernet generally works okay but it drops randomly for like a minute. If I can't get it back, rebooting seems to clear it up.

WiFi did work well but now it freezes the box altogether. Probably a factory reset would fix that but I did one not too longer ago and just prefer security/stability of ethernet.

[Jupiter]

I Never had problems using ethernet connection but I used it only several times. I use 5ghz connection and it functions perfectly. No 2,4 connection with this ROM but I do not care.

[mh1983]

Is anyone using this box through a hard-wired ethernet connection? I prefer this route, and when it works, it works well, but sometimes the traffic drops or I boot up the box and the ethernet indicator is not there and I have to reboot. I gave it a static IP and use OpenDNS. Any suggestions to improve the stability?

[jebaga]

https://browntransport813.weebly.com.../477739111.jpg

Im buy Beelink GT1 from friend.
On this is android 6.0.1,version GT1_106M0
S/N G912BKMF.....
Android 7 from beelink forum stuck and give error,but box is working.
Please for new rom with new android 7,8,9 or 10 for updating from usb.

http://www.bee-link.com/forum.php?mo...read&tid=34862

Maybe update like on video?

https://www.youtube.com/watch?v=R59M1cz_trE