NEOMODE HYBRID ROM 1.7 - MK802IV, UG007B, CX-919, MK809III and others with AP6210

[Skyback]

Ok we have the Failure. External Harddrive without PSU will not work.
You must use a PSU for the Hard-drive.
The main psu from the TV stick can not handle both. If you want to ask why it works for 10min. I can say you why.
The psu of the stick can gave the extra power for 10min. Than it is on his load range. Than the voltage on the output will sink under 5V and then the problems begin.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

And if I go with a 3A PSU? Will it work? I've seen this happening not only in content from the HDD but from streams... I put on a stream on XBMC it was all fine... left it for hours! When I got home the stream was frame skipping very badly.

I'm attaching the result of "dmesg" after playing the movie, it looks like there are some errors between frame processing.

dmesg result.txt

[write-tome]

----------------------

[Tjee]

Nvm

[write-tome]

Will see if the Driver is in the Kernel.
If not will build myself.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Great ! Great !
I'm waiting Your news ...
I appreciate thanks a lot

[Tjee]

CX919
Bugs found:
- Can't map Touch mouse with mouse pointing device in Tincore Keymapper.
I used the Mele F10 pro air mouse. It worked flawlessly with 'Hoabycsr No Overclock (400mhz) 720 frame skip fix' kernel (Finless V1.5 kernel), but here it seems to fail. I can map it, yet when I click it, nothing happens.

- Right and left triggers are identified as one Touchpad when used in Tincore Keymapper (same with aforementioned kernel).

[chopinko]

Finally - Managed to install this one over my UG007B.

I'm not sure which wifi i have, new or old, but everything works - except the wifi thing.
Is there any solution\fix for that?

[Tjee]

Problem appears to be NO UINPUT support.
That's kind of sad, considering you're actually packing Tincore Keymapper as a system app :/

Rom itself is great though, aside from that nasty problem.

[neomode]

Hello,

Please deinstall TinCore complete. Then Install it new from AppStore and see if this help.

Neomode

[Tjee]

Didn't work.Touch/hybrid input by hybrid pointer is simply not registered.

[ulises1954]

Hi Neomode,

As I already mentioned, I have been using this ROM 1.7 without problems, but today decided to test the latest Netflix v3.0 released today at the Google-Play-Store, and have noted that this APP works but have serious problems wile buffering...

Sometime works for 30 minutes without problems, but after that it frezee and never plays again.

After it freeze, I have try to erase cache and date, and all the cleaning procedures to the APP, but the Netflix APP never play any movie again until I Reset and Restart my CX-919...

I Noted on a separate post:

http://www.freaktab.com/showthread.php?7544-Netflix-issues-with-NEOMODE-1-7-Rom-on-MK802iv-New-Wifi

That some user are having apparently similar problems, so I would greatly appreciate if you could test and help us with this situation, because it seams that it is a buffering or memory problem I thing...

Thanks in advance!

[rivol]

Dose this ROM works with the Minix Neo X7 ?

[neomode]

AW: NEOMODE HYBRID ROM 1.7 - MK802IV, UG007B, CX-919, MK809III and others with AP6210

Might be when you change the Kernel with a kernel for you're Device.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[mechaone]

Thank you, Neomode. Your hard work is appreciated.

Sent from my XT925 using Tapatalk 4

[Tjee]

Might be when you change the Kernel with a kernel for you're Device.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Does Touch Input work for you?

I've been trying both this Rom + kernel and the Rom + Kernel from Finless 1.6 (http://www.freaktab.com/showthread.p...inless-ROM-1-6).
Are you guys using the same kernel?
I mean it looks like it, and it's giving me the same problem, so...

[tincore]

Does Touch Input work for you?

I've been trying both this Rom + kernel and the Rom + Kernel from Finless 1.6 (http://www.freaktab.com/showthread.p...inless-ROM-1-6).
Are you guys using the same kernel?
I mean it looks like it, and it's giving me the same problem, so...

Not very sure but it is possible that the firmwares that neomode makes have problems with my app.