[ROM] Tanix X4 SC ATV v6.0 USERDEBUG - S905x4 - Android 11 - Multi-Wifi&BT

[superceleron]

Right now, only on sdk level.
I will see if i can implement it, but all depends on my free time to do it.

[Ryko1000]

Thanks for answering. Any other way of acheiving auto frame rate switching that you know?

[superceleron]

Thanks a lot for doing this!

Is there any chance to make Afrd work since there is root now?

Hi, and no sorry AFRD will not work on any of android 11 fw's
Unless the creator of it makes some updated to the app.

[Ryko1000]

Thanks a lot for doing this!

Is there any chance to make Afrd work since there is root now?

[MiAutomations]

Sorry i do not have any word on Armbian support on this chip.
Is very recent chip so i really don't know how the support are at the moment.

No problem thank you for your reply. I understand, and yes this is a recent Chip as you mentioned

maybe in the near future appears some one that can install Armbian in this chip/box

Cheers

[superceleron]

Hello to all

And thank you for your shared work.

I'm searching for a way to install Armbian on this box, do you have any information that can possible help me on this?

Thank you in advance for your help

Sorry i do not have any word on Armbian support on this chip.
Is very recent chip so i really don't know how the support are at the moment.

[MiAutomations]

Hello to all

And thank you for your shared work.

I'm searching for a way to install Armbian on this box, do you have any information that can possible help me on this?

Thank you in advance for your help

[superceleron]

Hi, thks.
Ok i will add it in the next build.

[maxcombor]

This is the best rom for now , first time bluetooth and wi fi can work together , on a95xf4 works perfect , only one small thing if you can put inside rc file for a95xf4 for remote , because is imposible with adb , here -- remote.tab1 list from a95xf4 Thanks .

#************************************************* ************************************************** ******
#this file is used to store key map table
# custom_name: name of map table
# custom_code: custom code for remote device
# release_delay unit:ms.release will report from kernel to user layer after this period of time
# from press or repeat triggered.
###PARAS FOR MOUSE MODE:
# fn_key_scancode: scancode of fn key which used to swith mode
# cursor_left_scancode: scancode of left key
# cursor_right_scancode: scancode of right key
# cursor_up_scancode: scancode of up key
# cursor_down_scancode: scancode of down key
# cursor_ok_scancode: scancode of ok key
#************************************************* ************************************************** **********
custom_name = cyxtech-remote-a95x
custom_code = 0xdf00
release_delay = 60

fn_key_scancode = 0x03
cursor_left_scancode = 0x47
cursor_right_scancode = 0x07
cursor_up_scancode = 0x1a
cursor_down_scancode = 0x48
cursor_ok_scancode = 0x06

key_begin
0x5c 114
0x5d 115
0x4a 113
0x47 105
0x1a 103
0x07 106
0x48 108
0x06 97
0x0a 158
0x42 102
0x1c 116
0x18 139
0x03 388
0x54 2
0x16 3
0x15 4
0x50 5
0x12 6
0x11 7
0x4c 8
0x0e 9
0x0d 10
0x0c 11
0x10 14
0x4b 397
0x4f 396
0x5f 394
0x09 392
0x01 390
0x5a 396
0x19 397
0x13 398
key_end

[superceleron]

Updated 1º post with v2.0... small update only!

[superceleron]

Well after playing a 4k YT video for 5h and i dont see a issue it played just fine without any packed loss or lost frames.
Ram usage is normal, i totally forgot this device as "4gb" of ram and i have "low ram device" disabled on the fw, that is normally used for devices with max 2gb of ram.
That is why you see a bigger ram usage.

Total RAM: 3,583,552K (status normal)
Free RAM: 1,878,587K ( 350,907K cached pss + 310,620K cached kernel + 1,217,060K free)
ION: 90,408K ( 66,752K mapped + 12,072K unmapped + 11,584K pools)
Used RAM: 1,697,633K (1,198,589K used pss + 499,044K kernel)
Lost RAM: 7,328K
ZRAM: 4K physical used for 0K in swap ( 393,212K total swap)

[superceleron]

Ho i forgot this fw its hard the cpu, it gets ... really hot so make sure you have a good heatsink on the cpu.
On my X4 i added one of that small heatsinks you can buy for like the Raspberry Pi.

[superceleron]

Ye i did notice, there is a memory leak somewhere i still need to debug that.
But that problem can be from that box you using, remember i build this one for the X4.
im checking now the memory usage, and YT playback.. going to leave it playing a few hours..
BTW Atv fws always use more ram since they have more google stuff running in the background.

[maxcombor]

Yes but i do not hawe posibility to change anything with adb , also i have a lot of drops even in original youtube with this rom , i do not why ... memory ocupaited even with no load ocupation after 5min is 1800Mb , it is a Looot , bu like i told you for the first port is ok , yust need polish ....and root of course root.

[superceleron]

Bravo for now all worked nice ,iiv tried to upload remote conf for a95xf4 , but this is no rooted version ? Thanks again for your work .

Well its the userdebug version that is almost the same as rooted, you have access to SU in the shell.
But of course the apps do not have access to it.
I will see if i will do a "regular" root it or not, i dont like very much of rooting my fw's.
Anyway thks for the testing