[ROM] Tanix X4 SC ATV v6.0 USERDEBUG - S905x4 - Android 11 - Multi-Wifi&BT

[kamiar_1982]

Hi, how i can set tanix x4 on recovery mode? (Please show with picture or video)Thanks for helping

[superceleron]

Yes i know im trying to find a solution... once i do i will update here!

[Fshd]

dowload link is break

[Goldman]

Glad you have success!!!

If you haven't already
Boot to recovery (toothpick method)
Factory data reset

let system reload
Sometimes can clear issues.

Go back to page 7 in this thread and read forward in time
There was firmware change
Something about wifi...

Also if you are happy with Factory Firmware
Then use it

Happy Testing

I'll follow your guidance and after the tests I'll post the result. Thanks

[freddy]

Thank you very much for replying!

I even tried on another computer but it didn't work. After a lot of searching I found a generic driver that worked and was able to burn the firmware as Amlogic USB Burning Tool v3.2.0. (if anyone needs the driver I'll post the link here)

It's working but with use it has errors (bugs) that it didn't have with the firmware that came with Tanix X4. I downloaded the firmware (Tanix_X4_s905x4-20220620) from more than 5 different locations but they are all exactly the same.

I noticed that my Tanix is the Tanix 4X PRO (see photo below). The firmware must have some difference from the version without PRO.

If anyone has a link to download the firmware, I would appreciate it!

Glad you have success!!!

If you haven't already
Boot to recovery (toothpick method)
Factory data reset

let system reload
Sometimes can clear issues.

Go back to page 7 in this thread and read forward in time
There was firmware change
Something about wifi...

Also if you are happy with Factory Firmware
Then use it

Happy Testing

[Goldman]

Try this maybe
If you haven't already

Uninstall all versions of UBT and there drivers from all
Even delete desktop shortcut

Restart

Now install UBT 3.20.

Happy Testing

Thank you very much for replying!

I even tried on another computer but it didn't work. After a lot of searching I found a generic driver that worked and was able to burn the firmware as Amlogic USB Burning Tool v3.2.0. (if anyone needs the driver I'll post the link here)

It's working but with use it has errors (bugs) that it didn't have with the firmware that came with Tanix X4. I downloaded the firmware (Tanix_X4_s905x4-20220620) from more than 5 different locations but they are all exactly the same.

I noticed that my Tanix is the Tanix 4X PRO (see photo below). The firmware must have some difference from the version without PRO.

If anyone has a link to download the firmware, I would appreciate it!

[freddy]

I have Tanix 4X - S905X4, I downloaded Amlogic USB Burning Tool v3.2.0 and installed it on a computer running Windows 10 x64 but the installed drivers are not compatible with the Amlogic S905X4 as the computer does not recognize the TV Box (there is a question mark in the Windows device manager as if the USB driver is missing). I know how to do the procedure, because I've done firmware recording (flash) on a TV Box with Amlogic S905X3 using Windows 10 without problems. Please, can someone help me by pointing out where I can get the correct USB S905X4 driver for Windows 10? Thanks

Try this maybe
If you haven't already

Uninstall all versions of UBT and there drivers from all
Even delete desktop shortcut

Restart

Now install UBT 3.20.

Happy Testing

[saidkara]

Amlogic USB Burning Tool v3.2.0 flow dll failed

[emveepee]

Do answer my own question, yes I can now connect to the Tanix with adb which is great, thanks.

[Goldman]

I have Tanix 4X - S905X4, I downloaded Amlogic USB Burning Tool v3.2.0 and installed it on a computer running Windows 10 x64 but the installed drivers are not compatible with the Amlogic S905X4 as the computer does not recognize the TV Box (there is a question mark in the Windows device manager as if the USB driver is missing). I know how to do the procedure, because I've done firmware recording (flash) on a TV Box with Amlogic S905X3 using Windows 10 without problems. Please, can someone help me by pointing out where I can get the correct USB S905X4 driver for Windows 10? Thanks

[emveepee]

The stock firmware I can't connect with adb over wired ethernet, connections is refused. Does anyone know if Is that working in this firmware?

[yayo1702]

hello, I disabled hdmi cec, the problem persists

[superceleron]

check CEC options in video settings!

[yayo1702]

hello, I have a problem, sometimes the box does not turn on, and sometimes it turns on by itself, is there an adjustment to be made

[messure]

How are things going with the new build version? I want to test with a new driver for the fn link wifi chip.