NAND Chip Mask ROM Mode Short Location

[claudix97]

hello, please help me found the short pin for an x96 mini s905w, i installed atv experience and now it is in bootloop, sd card method doesn't work and also the av button seems not working anymore
i am having trouble uploading pictures from the forum so here it is

https://pasteboard.co/JAUTrc1.jpg

https://pasteboard.co/JAUTNVx.jpg

thank you so much

Hello! Please tell me where are the contacts of the NAND chip beelink gt mini-A

postimages.org

[soldiaz]

Please someone send me money

[sergiozol]

Hello! Please tell me where are the contacts of the NAND chip beelink gt mini-A

[sergiozol]

Please tell me which contacts to close for firmware beelink gt mini-A

[Mikaelzeman]

Hello everyone , i have tanix tx3 and would like to know how to shorts pins in order to flash firmware.
https://postimg.cc/mcnhrNVmcnhrNV

https://postlmg.cc/K4M3RV6T

[anteros]

help debricking Sunvell T95 s1 2g/16G s905w,short pin NAND etc.

help debricking Sunvell T95 S1 2g/16g by short pin NAND,etc

Hi,


The story is as follows:

Running stock android 7.1,it's rooted.Everything went fine.

I just wanna root management,so just intall SuperSU.apk,got it stuck at logo.Maybe installing Magisk.apk would not brick it?Someone explains?

So try to re-flash a rom by USB burning tool.Still stuck.
So try the card maker,this time.complete dark screen.Wiped bootloader.

So hook up usb-ttl to corrobrate to see in the terminal

'LOOP:8F;EMMC:800;NAND:85;SD:800;USB:8;LOOP:90;EMM C :800;NAND:85;SD:800;USB:8'

With card maker 'bootloading.....CPU reseting....'

Hit enter so hard,can't stop the bootloader....also it seems the rx port is somewhat damaged after a second soldering.

So the last resort shall be short pin NAND,right?

With Amlogic USB burning tool 2.1.7,without holding reseting buttonjust plug the USB,it shows connect successful,with or without Power adapter.Guess the RAM is DDR3L.

I read somewhere by short pin the NAND to instruct the CPU to ignore the existence of NAND.

Which two pins shall I short in my case?

What else can I besides short pin NAND to debrick it?

The two firmwares I tried is T95 s1 2G/16G

1. MBOXT0021_ATV.img https://chinagadgetsreviews.com/down...s1-tv-box.html
2. T95S1_2GB_TS10022.img https://forum.freaktab.com/forum/tv-...16g-p282-board

These two firwares always stopped at 7%.

My borad has a label that says T95S1-2GB-TS10024.

So maybe some change in specs?

Help.

P.S. installing ATV_s905w-V2H-final does nothing.

This forum has a problem uploading photos.

https://www.flickr.com/photos/jackeastland/50579025507/in/dateposted-public/

https://www.flickr.com/photos/jackea...posted-public/

https://www.flickr.com/photos/jackea...posted-public/

https://www.flickr.com/photos/jackeastland/50579025597/in/dateposted-public/

[anteros]

help debricking Sunvell T95 s1 2g/16G s905w,short pin NAND etc.

help debricking Sunvell T95 S1 2g/16g by short pin NAND,etc

Hi,


The story is as follows:

Running stock android 7.1,it's rooted.Everything went fine.

I just wanna root management,so just intall SuperSU.apk,got it stuck at logo.Maybe installing Magisk.apk would not brick it?Someone explains?

So try to re-flash a rom by USB burning tool.Still stuck.
So try the card maker,this time.complete dark screen.Wiped bootloader.

So hook up usb-ttl to corrobrate to see in the terminal

'LOOP:8F;EMMC:800;NAND:85;SD:800;USB:8;LOOP:90;EMM C :800;NAND:85;SD:800;USB:8'

With card maker 'bootloading.....CPU reseting....'

Hit enter so hard,can't stop the bootloader....also it seems the rx port is somewhat damaged after a second soldering.

So the last resort shall be short pin NAND,right?

With Amlogic USB burning tool 2.1.7,without holding reseting buttonjust plug the USB,it shows connect successful,with or without Power adapter.Guess the RAM is DDR3L.

I read somewhere by short pin the NAND to instruct the CPU to ignore the existence of NAND.

Which two pins shall I short in my case?

What else can I besides short pin NAND to debrick it?

The two firmwares I tried is T95 s1 2G/16G

1. MBOXT0021_ATV.img https://chinagadgetsreviews.com/down...s1-tv-box.html
2. T95S1_2GB_TS10022.img https://forum.freaktab.com/forum/tv-...16g-p282-board

These two firwares always stopped at 7%.

My borad has a label that says T95S1-2GB-TS10024.

So maybe some change in specs?

Help.

P.S. installing ATV_s905w-V2H-final does nothing.

This forum has a problem uploading photos.

https://www.flickr.com/photos/jackeastland/50579025507/in/dateposted-public/

https://www.flickr.com/photos/jackea...posted-public/

https://www.flickr.com/photos/jackea...posted-public/

https://www.flickr.com/photos/jackeastland/50579025597/in/dateposted-public/

[ninoquinta]

hello good night everyone. A short time ago I bought the tv box x88 pro 10, with a serial number x88 pro b rk3318 d4 v1.1 Now it does not turn on, a red led lights up and nothing appears on the television. I have seen in the forum that it can be reset by shorting somewhere. I wanted to ask if anyone has. I have installed the drivers with the program and it does not recognize me when I reset or USB. Do not connect the power cord I do not know if it is necessary or not. I am sending you a photo of what it is like to see if someone can help me. Regards, and thank you very much.

https://pasteboard.co/JzC7T4I.jpg

https://pasteboard.co/JzC8gUi.jpg

https://pasteboard.co/JzC8upAW.jpg

[zally]

Thanks, nothing :-( still on 1-7% of flash error message (Uboot,...)

I flash Vortex. See pic, but still only Boot logo and nothing. (Recovery mode won`t go)

https://pasteboard.co/Jw7yjFl.jpg

...but my TV Box are diferent...

X88 Pro X3 / X99 Max Plus / Transpeed X3 Plus
"You need to close the contacts on the memory chip 29-30 or 31-32, both options work"

source: [4PDA.ru]

[zally]

source: [4PDA.ru]

Thank you, but my TV Box are diferent.: https://pasteboard.co/Jw6naul.jpg

i use also Vortex rom, upload OK, after upload only Boot logo and thats all :-(

What combination are necessary? TV BOX - X88 Pro X3 S905X3.

source: [4PDA.ru]

[zally]

Could you HELP ME, please. I brick the box and i need pin unlock. With combination are necessary? TV BOX - X88ProX3 S905X3.

Big Thank you!

https://pasteboard.co/Jw3j6YH.jpg

https://pasteboard.co/Jw3jkYU.jpg

https://pasteboard.co/Jw3jvbV.jpg

https://pasteboard.co/Jw6naul.jpg

[Franchi47]

Hi,

I've got a H96 MAX 4GB 64GB bricked and I dont know the pins to short. Can You help me? thanks in advance.