NEW {OFFICIAL KitKat 4.4 720p/1080p} CR11S/CS968 2MP/5MP ROM Builds Now Available

[hkp168]

I push resolution with terminal commands :

su
wm size 1920x1080
wm density 240

Everything looks ok and AnTuTu said 1920x1080 ! :-)

I tried those commands previously.
I also checked the display resolution by entering
wm size,
the system responded with

physical mode is 1280x720
override mode is 1920x1080

Although AnTuTu or CPU-Z uses the overrided display resolution, the screencapture function no longer works after using wm size override. Do you have a similar problem or just me?
What is the difference between a real 1080p or emulated resolution?

hkp168

[clarkss12]

You are not follow direction, your device must be ON and running, then enable usb debug, then check mark Connect to PC, now if you don't have the driver, at this time your pc should prompt you to install driver, once driver installed correctly, you open the tool and it should see your device, execute the tool and it should shutdown your device and do it thing, then your device will boot backup and you need to do the "check mark Connect to PC" again. If needed you may need to do one more time with "check mark Connect to PC" a third but final time...

I was afraid of that. I could not try it because my computer is too far from my tv. I do not have a laptop, so I will have to figure something out.

[clarkss12]

I was afraid of that. I could not try it because my computer is too far from my tv. I do not have a laptop, so I will have to figure something out.

Finally got root. I guess I was not following the directions, because didn't want to believe I had to have my computer next to the tv. I don't have a laptop. Anyway, I dug out an old crt tv that did have a port for video and audio. I hooked up my TV01 (aka CS968) to this crt using the analog cable provided, fortunately included with this device. I then followed the instructions and everything went perfectly. Now I have root.

thanks for all the help, I appreciate it.

[Tech1]

A Full Customized Android TV KitKat 4.4 CR11S/CS968 Home Screen





How To Access Wallpapers, Widgets And Settings Via Android TV KK
4.4 ROM Builds? Just Left Click On Your Mouse/Mouse Keypad The Above Photo Screen Will Auto Appear ...

*Waiting on a response from Cloudnetgo, concerning the 1080p updated ROM builds ..

[milenko79]

Now that more people have installed this rom, can anyone tell me if your screen size (the sliders to adjust for overscan) get saved after a reboot on the cloudnetgo rom. I't doens't on the csq rom and that is the only thing about it that sucks.

about the resolution, I thought I read that the overlay user for vidoe is 1080p, but het interface is 720. When I look close on my tv i'm pretty sure that is the case. I can tell when my 46 inch tv is interpolating data from close up.

[d33]

NEW {OFFICIAL KitKat 4.4 720p/1080p} CR11S/CS968 2MP/5MP ROM Builds Now Available {BeYond XBMC v3.4/5} READY

Anyone want to post up a DMESG so we can see if there are any clues to why this variant boots up different to every other design


Using my ipad so apols for any stupid ios spelling 'corrections'

[d33]

NEW {OFFICIAL KitKat 4.4 720p/1080p} CR11S/CS968 2MP/5MP ROM Builds Now Available {BeYond XBMC v3.4/5} READY

I'll install this image in my hardware (cx921b) sometime over Easter and compare to the DMESG you guys post.


Using my ipad so apols for any stupid ios spelling 'corrections'

[Tech1]

Welcome D33

I'll install this image in my hardware (cx921b) sometime over Easter and compare to the DMESG you guys post.


Using my ipad so apols for any stupid ios spelling 'corrections'

d33 glad to see you are here, awesome ...

[Tech1]

Now that more people have installed this rom, can anyone tell me if your screen size (the sliders to adjust for overscan) get saved after a reboot on the cloudnetgo rom. I't doens't on the csq rom and that is the only thing about it that sucks.

about the resolution, I thought I read that the overlay user for vidoe is 1080p, but het interface is 720. When I look close on my tv i'm pretty sure that is the case. I can tell when my 46 inch tv is interpolating data from close up.

I believe you are correct, indeed this is a 1080p ROM according to Cloudnetgo, here is response letter concerning the 1080p issue ... My TV say 1080p also ...


Apple (cloudnetgo) ([email protected])
Add to contacts
1:23 AM


Photos To: Tech1



Hi Sir : this is apple glad to service for you . did you update to android4.4 kitkat about our CR11S ? It is 1080p indeed . price : we have stocks now would

From:	Apple (cloudnetgo) ([email protected])
Sent:	Tue 4/15/14 1:23 AM
To:	Tech1 ( @live.com)

Hi Sir : this is apple glad to service for you . did you update to android4.4 kitkat about our CR11S ? It is 1080p indeed .

[buhohitr]

Tech1, are you going to release your version of this Kitkat rom? If you do I will wait for your version. Thanks

[Tech1]

Tech1, are you going to release your version of this Kitkat rom? If you do I will wait for your version. Thanks

It's going to be a long minute, before I produce a custom version, because I'm still in the test mode ... My advise, go ahead and install the current official version first ...

[hkp168]

Anyone want to post up a DMESG so we can see if there are any clues to why this variant boots up different to every other design


Using my ipad so apols for any stupid ios spelling 'corrections'

D33,
I have tried both

CR11S_cloudnetgo_ap6210_4.4.2_20140411.IMG
htc_t018_public_ap6210_CSQ_4.4.2_20140411.IMG

on my TV01 (CS968) V3, with AP6210 and 2M-pixel camera. They looked very similar except the model number "CR11/S Cloudnetgo (rk3188)" vs. "CS968 (rk3188)". Antutu reported screen resolution 1280x720.
Everything works fine. CPU looked to 1.42 GHz because of my "T" CPU.

DMESG attached.

The power/status LED on the top of the TV box was "solid blue" colour when using these 4.4.2 ROM's (same as 4.2 stock JB ROMS). When I tested your kernel builds V27, V31, V4029, V404x...,previously, the power LED had dimmed brightness (blue/red), with or without using OTG boot tricks.

hkp168

[vodanhdaisu]

It's going to be a long minute, before I produce a custom version, because I'm still in the test mode ... My advise, go ahead and install the current official version first ...

Happy to hear that you're working on building another awesome 4.4 rom
Please take your time. I will wait for your release and install it immediately

[clarkss12]

D33,
I have tried both

CR11S_cloudnetgo_ap6210_4.4.2_20140411.IMG
htc_t018_public_ap6210_CSQ_4.4.2_20140411.IMG

on my TV01 (CS968) V3, with AP6210 and 2M-pixel camera. They looked very similar except the model number "CR11/S Cloudnetgo (rk3188)" vs. "CS968 (rk3188)". Antutu reported screen resolution 1280x720.
Everything works fine. CPU looked to 1.42 GHz because of my "T" CPU.

DMESG attached.

The power/status LED on the top of the TV box was "solid blue" colour when using these 4.4.2 ROM's (same as 4.2 stock JB ROMS). When I tested your kernel builds V27, V31, V4029, V404x...,previously, the power LED had dimmed brightness (blue/red), with or without using OTG boot tricks.

hkp168

I don't know why, but my TV01 seems more stable with the CS968 roms. Something about the CR11/s that my box doesn't like.

[buhohitr]

I don't know why, but my TV01 seems more stable with the CS968 roms. Something about the CR11/s that my box doesn't like.

haha..I just wondering why only CR11S came out with 1080p rom and no others have this!!