I did have some crashes with earlier FW versions which I though might be temperature related but after keeping some tabs on when it happens it turned out that it was only when using XBMC. I did not see these crashes with XBMC RC1 or Gotham final though so I guess it was resolved.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Tronsmart S89 Standard Finless 1.2 ROM
Collapse
X
-
Originally posted by nutzu View Post
I did have some crashes with earlier FW versions which I though might be temperature related but after keeping some tabs on when it happens it turned out that it was only when using XBMC. I did not see these crashes with XBMC RC1 or Gotham final though so I guess it was resolved.
-
In "general" most electronic chips these days are rated for about 165F and above that is considered too hot. So if you can measure the chip itself and if it is getting above 150F I would do something about it.
Bob"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
Comment
-
I don't have my daughter with me this weekend, so I'll have some free time to fiddle with my Beelink M8 - I was planning on opening it up and doing a fan mod (top of case, sucking air out) and an external antenna mod (I'll document both mods, for those who are interested).
I'm in Australia and whereas it's winter now, summers tend to be quite hot here (as they do everywhere, I suppose ). So the fan mod will be preventative maintenance.
Comment
-
Originally posted by Finless View PostIn "general" most electronic chips these days are rated for about 165F and above that is considered too hot. So if you can measure the chip itself and if it is getting above 150F I would do something about it.
Bob
Pointless to stick a probe on the heatsink...
Comment
-
Fan and Antenna mod
Originally posted by gizmomelb View PostI don't have my daughter with me this weekend, so I'll have some free time to fiddle with my Beelink M8 - I was planning on opening it up and doing a fan mod (top of case, sucking air out) and an external antenna mod (I'll document both mods, for those who are interested).
I'm in Australia and whereas it's winter now, summers tend to be quite hot here (as they do everywhere, I suppose ). So the fan mod will be preventative maintenance.
I am waiting for my Vega S89 to arrive and also plan to do an antenna mod. I would be interested in seeing both the fan and antenna mod. Thanks :-)
Comment
-
Originally posted by Lokie View Postyes correct... but that's junction temperature... no good way to measure that except if we have a temperature diode on the chip and a driver to read back temperature. Is this available?
Pointless to stick a probe on the heatsink...
Bob"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
Comment
-
Originally posted by thechemist View PostHey Finless, I sent you a PM
I just installed your 1.2 ROM and when my box starts up, its a black droid that says "A Finless Bob Rom". Nothing else is happening.
It takes a few minutes to boot the first time also....
Comment
-
Originally posted by thechemist View PostI just tried to upload the ROM again and I keep getting this screen.
I flashed the stock ROM (101k4) first then flashed Finless 1.2 on it.
flash the 101k4 first and then go to this likn
and use that to root
i did the same you did and you can't use the 1.2 when you flash the 101k4 rom
Comment
-
Originally posted by Brinis View Post
Comment
What's Going On
Collapse
There are currently 2256 users online. 2 members and 2254 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Comment