Kit Kat 4.4.2 RK3066 (Fully Working)

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

I wonder if the incompatibility exists between my TV and the stock 1080p kernel. Can you modify it for 720p support? My TV is quite old.
😃

Sent from my SPH-L720

I would if I could - but I can't. That's actually a good point, and you might be on to something. I had the exact same problem way back when I flashed a RIkomagic ROM. Crazy black distortion and flickering and no wifi, although it was for my chipset.

...and it was on one TV, not others. 1080p kernel was the case back then, as well.

[optimummind]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Sorry to hear that. Something must be different/off about your chipset. I was hopeful too because others had solved similar issues with this ROM by beefing up the power supply.

I wonder if the incompatibility exists between my TV and the stock 1080p kernel. Can you modify it for 720p support? My TV is quite old.
😃

Sent from my SPH-L720

[Shomari]

The kernel is already 1080p; it uses overlay which can be disabled in the build prop. That and how to enable location settings is all covered in this thread. Refer to the first post for all the relevant links (or read the thread straight out)

[gekubo]

Minor fixes on imito mx2

heres the video.

http://youtu.be/GQ8ofIiFOjo

I can confirm this rom is fully functional on iMito MX2 at 720p Even Wifi-Direct and Cheapcast


How did you manage to get bluetooth working on your device?

I think you have same model as me (iMito MX2) but on mine BT is not working. Location is not working either and Build.prop is with chinese letters.

Should I flash 1080p kernel?

What did you do? Any help will be welcome. Thanks

[himmon]

It's a no go. Those are for RK3188 devices such as MK809III

Yeah just noticed, double checking filename again saw the mk809iii and not mk809ii, updated previous post

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Do you use Sergio Poverony RK3xxx Firmware Tools to unpack?
Cant seem to extract the img. I'll check for a later version.

It's a no go. Those are for RK3188 devices such as MK809III

[himmon]

Don't bother downloading the 'new' UGOOS ROM(s). The MTK variant is identical to the one in this thread. No changes to kernel, I expect system to be the same as well. I'll edit this post with results after I diff the files.

**WAIT** might have got my directories crossed.

Do you use Sergio Poverony RK3xxx Firmware Tools to unpack?
Cant seem to extract the img. I'll check for a later version.

[Shomari]

Don't bother downloading the 'new' UGOOS ROM(s). They are for RK3188 variants, not RK3066. Kernel will not power device.

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Havent opened mine to check although just checked PSU 5v 2000mA?? Possibly the issue?
Interestingly never had issues with it crashing etc.

...probably just needs tweaked. Mine starts off at about 9500 on this ROM; through tweaks and overclocking it is at 15000-15200 with tangible improvements throughout.

[chenrp]

i have MK2 with ap6210 - kitkat ready?

i have MK2 with ap6210
where can i find the kitkat rom for it?

[himmon]

..my MX1 has dirt cheap Hynix NAND.

Havent opened mine to check although just checked PSU 5v 2000mA?? Possibly the issue?
Interestingly never had issues with it crashing etc.

[Shomari]

Thanks for the link. They might have fixed the wireless problems optimummind and some others in MTK no man's land have been having

If anyone does test, can you please see if the new ROMs have any considerable improvements over the one in this thread?

I don't think I'll be fussing with the UGOOS ones too much but I'll check.

[himmon]

UPDATE:
These are Quad core RK3188 Roms within this post below, please ignore unless they're of some use to you as ROM's within this thread are RK3066 Dual Core Based.

UGOOS have posted two new KitKat ROM's today for MTK & AP6210 Chipsets.


Have no further details as to what exactly they are but here's the rar & img filenames.
andriod 4.4_MK809IIIUGOO7BQC802_MTK_public_20140704 - 4.4_T010_mtk5931_public_20140704.img

andriod 4.4_MK809IIIUGOO7BQC802_AP6210_public_20140704 -
4.4_T010_AP6210_public_20140704.img

http://ugoos.net/downloads

[Shomari]

..my MX1 has dirt cheap Hynix NAND.

[himmon]

...your runtime is very slow. Mine runs at 1700, also your storage I/O is way below what it should be for this chipset.

Probably cheap quality memory components onboard.