Cube Talk 9x U65GT ROM based on Cube's V 1.8 firmware of 3 September 2014

[Macbeyland]

problem with device

Hi , thanks for having me around. I installed this ROM yesterday but I noticed that I can't install blackberry messenger bbm. I get the unable to perse ....each time I try. Any remedy to this?

[pix64]

A word of warning, this reminds me of the version that bricked many tabs.
Brian

You're so right Brian :-)

This was posted and made sticky on Cubes's chinese forum (http://bbs.51cube.com/thread-94199-1-1.html), a few minutes ago. I used google translate, but i'm not sure to understand the last part right (back to 1.8 or fixed 2.0 ?):

Young three skin published in 2014-11-15 13:52
upgrade 2.0 touch screen did not respond, help

Special Note: There are some early batches of the factory machines because the software version of the touchscreen chip reason, V2.0 firmware brush into this phenomenon may occur after the touch screen inoperable. : - Make This phenomenon users to download "wire brush package (Download fail back after U65GT_V2.0 touch brush to brush transitional version http://pan.baidu.com/s/1ntFTbVN before, then brush the brush into the back). " Touch the normal version of the firmware V1.8 - Brush Pack (Download: http://pan.baidu.com/s/1rRsnG ) can, please understand the inconvenience!


Edit : other thread about this : http://bbs.51cube.com/thread-97664-1-1.html

[valerima]

touch screen

You're so right Brian :-)

This was posted and made sticky on Cubes's chinese forum (http://bbs.51cube.com/thread-94199-1-1.html), a few minutes ago. I used google translate, but i'm not sure to understand the last part right (back to 1.8 or fixed 2.0 ?):

Young three skin published in 2014-11-15 13:52
upgrade 2.0 touch screen did not respond, help

Special Note: There are some early batches of the factory machines because the software version of the touchscreen chip reason, V2.0 firmware brush into this phenomenon may occur after the touch screen inoperable. : - Make This phenomenon users to download "wire brush package (Download fail back after U65GT_V2.0 touch brush to brush transitional version http://pan.baidu.com/s/1ntFTbVN before, then brush the brush into the back). " Touch the normal version of the firmware V1.8 - Brush Pack (Download: http://pan.baidu.com/s/1rRsnG ) can, please understand the inconvenience!


Edit : other thread about this : http://bbs.51cube.com/thread-97664-1-1.html

it is a fun, but Lepi wrote that hisbricked tablet was happily repaired after flash with this fw n.2.

[Guest]

battery problem

hello, I have a problem with the battery indicator which sometimes depends (see picture)

[ammo2003]

Originally Posted by ammo2003<br />
Brian, this just happened, the battery nosedived! Any ideas?

<br />
I seen this on my Cube some time ago.<br />
I found an advice on 4PDA regarding some type of calibration and it worked<br />
1) 2-4 complete cycles (discharge to shutdown - charging off to 100%)

2) Each cycle is as follows: discharge - off - charging to 100% - with the inclusion of plug the cable - reboot - take out the charging cable

In my situation only 2 cycles was enough

[mattiesrag]

Audio Problem

Cannot get audio to work when watching videos posted on Facebook. Nothing in settings! Any ideas?
Regards

[f1c]

Out of interest, which google app pack are you guys using? And if it's not a pack, which version of Google Play Store and/or Services did you pick? There seem to be quite a lot of different versions for the latter so I am wondering which one the best is.

[tempdroid]

SP Flash Tool

Hello @900supersport,
can I use SP Flash to just flash a custom recovery img file (like your CWM or Lepi's TWRP) from untouched Cube 9x 1.8 and then install a zip (root or Custom ROM) in recovery mode?

[900supersport]

Yes that should work.

[yungwizzy]

Re: Cube Talk 9x U65GT ROM based on Cube's V 1.8 firmware of 3 September 2014

Yes that should work.

can one use recovery tools to flash cwm or twrp on 9x??

[eteles]

Re: Cube Talk 9x U65GT ROM based on Cube's V 1.8 firmware of 3 September 2014

can one use recovery tools to flash cwm or twrp on 9x??

Of course... I've done so... Since Rasher and mobile uncle tools both failed here...

[chudster]

You can download here.

That looks to be an ota update. Currently nothing available for me to download.

A word of warning, this reminds me of the version that bricked many tabs.

Brian

Not sure if this is what might be useful to download but this looks like the official 2.0 download version.

http://pan.baidu.com/s/1ntFTbVN

[tomazf8]

hash in right speaker

hello, need help!

i am up to send my device to repairs in china. the seller i bought form told me the repair period can last up to two months. it there a better way, i mean to repair the device? to change the speaker maybe? where? and it there a spare part?

btw. my tablet has bended slightly, the glass was very badly glued and i very carefully bent it back. is it better to take repairs?

and what about root and the unofficial rom of yours, does it make any matter to this or do i need to reflash the orinigal one? what about flash counter?

[waldorh]

Pl's i've been having problems since i installed the supersport rom, my screen locks itself when using it, i really dont know how to resolve it.

[eteles]

Re: Cube Talk 9x U65GT ROM based on Cube's V 1.8 firmware of 3 September 2014

Pl's i've been having problems since i installed the supersport rom, my screen locks itself when using it, i really dont know how to resolve it.

This issue has been fairly discussed here... It's not a problem with the ROM, but with the magnet case... The magnet is too strong, so it can lock/unlock your screen even when the cover is placed on the back of the tab...