[Pipo-Project] M7Pro kernel

[stevejc]

Can someone tell me how to get the gpio?

see http://www.freaktab.com/showthread.p...ight=gpio+list

[d33]

here is gpio : [ATTACH]8626[/ATTACH]

I can't see the Touchscreen GPIO in that - was it stock?

[stevejc]

I can't see the Touchscreen GPIO in that - was it stock?

It's from Riley 3.4.1

[d33]

It's from Riley 3.4.1

I'm configuring GT928 Ts to use:

TOUCH_RESET_PIN RK30_PIN0_PB6 (I/O 174)
TOUCH_INT_PIN RK30_PIN1_PB7 (I/O 207)

These are obviously incorrect but I can't see the correct values?

NB. Confirmation of hardware - http://padbbs.zol.com.cn/1/213_8996.html

[stevejc]

I'm configuring GT928 Ts to use:

TOUCH_RESET_PIN RK30_PIN0_PB6 (I/O 174)
TOUCH_INT_PIN RK30_PIN1_PB7 (I/O 207)

These are obviously incorrect but I can't see the correct values?

NB. Confirmation of hardware - http://padbbs.zol.com.cn/1/213_8996.html

I see that on other dmesg

<4>[ 5.380550] <<-GTP-INFO->> GTP driver install.
<4>[ 5.380631] <<-GTP-INFO->> GTP Driver Version:V1.2<2012/10/25>
<4>[ 5.380645] <<-GTP-INFO->> GTP Driver build@09:01:29,Mar 6 2014
<4>[ 5.380657] <<-GTP-INFO->> GTP I2C Address:0x5d
<4>[ 5.505042] <<-GTP-INFO->> Ready to run update thread.
<6>[ 5.524969] input: Goodix Capacitive TouchScreen as /devices/virtual/input/input2
<4>[ 5.525097] <<-GTP-INFO->> GTP works in interrupt mode.
<4>[ 5.525421] <<-GTP-INFO->> IC VERSION:9280_1040
<4>[ 5.525436] <<-GTP-INFO->> Applied memory size:2562.
<4>[ 5.525463] <<-GTP-INFO->> Create proc entry success!

but not in mine !

in mine I get this
5.509933] <<-GTP-INFO->> GTP driver install.
<4>[ 5.510346] <<-GTP-INFO->> GTP Driver Version:V1.2<2012/10/25>
<4>[ 5.510417] <<-GTP-INFO->> GTP Driver build@15:36:10,Jul 7 2014
<4>[ 5.510461] <<-GTP-INFO->> GTP I2C Address:0x5d
<4>[ 5.510525] <<-GTP-ERROR->> Failed to request INT GPIO:207, ERRNO:-16
<4>[ 5.510662] <<-GTP-ERROR->> Failed to request RST GPIO:174, ERRNO:-16

but touch screen works in that rom !!!!
I see that in dmesg : CT363 ver=[2]
<6>[ 4.976303] input: ct36x_ts as /devices/platform/rk30_i2c.2/i2c-2/2-0001/input/input1
<6>[ 4.976498] ct36x_ts 2-0001: CT363 Successfully initialized

So maybe it's a VTL ct36x touchscreen ???

[d33]

So maybe it's a VTL ct36x touchscreen ???

M7Pro v1.01

[stevejc]

M7Pro v1.01

Yes

finally not sure, I can unlock first screen but nothing after that

[d33]

[Pipo-Project] M7Pro kernel

Touchscreen stops or LCD?


Sent from my iPhone using Tapatalk

[stevejc]

Touchscreen stops or LCD?


Sent from my iPhone using Tapatalk

Touchscreen stops only

[d33]

Touchscreen stops only

DMESG / LOGCAT

[stevejc]

DMESG / LOGCAT

here it is : logM7.zip

After some new test, touchscreen is working but not as expected.

It is rotated (upside down) and only on the left part of the tablet

that why I was thinking it is not working

Also I have no battery info : it says 0 %

[d33]

M7pro v1.02

Changelog

• Fixed i2c channel for battery driver
• Added i2c registration of audio
• Added model selection for Pipo tablets
• fixed i2c channel for HDMI driver
• changed options for VT CX363 touchscreen

[stevejc]

M7pro v1.02

Changelog

• Fixed i2c channel for battery driver
• Added i2c registration of audio
• Added model selection for Pipo tablets
• fixed i2c channel for HDMI driver
• changed options for VT CX363 touchscreen

Battery working

Touch Screen always upside down but on the other side and only half size of the screen.

It seems that Screen is also upside down,
When I have in landscape mode, the screen is in portrait (90 ° clocksize)


I will this morning add the cursor on the screen and send you photos



I've got some reboot too, but my M7pro has always got some problem (need overclock kernel to be stable)

[d33]

[Pipo-Project] M7Pro kernel

Your DMESG shows a high leakage level which backs off the voltage automatically. Not a healthy tablet


Sent from my iPhone using Tapatalk

[d33]

[Pipo-Project] M7Pro kernel

Can you post latest DMESG please


Sent from my iPhone using Tapatalk