[Pipo Project] M6 Pro

[fagotistas]

Unfortunately , location is not working. I had to use GPS with GPS fix to update my location ,temporarily , though I have always used wifi and mobile services for that purpose.

Στάλθηκε από το HTC One μου χρησιμοποιώντας Tapatalk

[Pipo2000]

Re: [Pipo Project] M6 Pro

Antutu point 22653

Strange.... Thats rather low for this rom.
Here's my result with screen in normal mode, dev options on, no OC kernel, just stock.
All apps already restored too :

[Pipo2000]

Thx Ayscii, i'll try that.

[annaepi]

The v1.0 ROM is a new build from sources ROM. With your previous ROM you probably used a different kernel that had changed CPU settings, and possibly also changed memory parameters.

I found that this ROM (with its standard settings) is very stable, and even without changing CPU frequencies, it is faster than the previous ROM's.

Deep Sleep does work, but you need to reboot again after the first boot.
After the first boot, the installation process finishes and cleans up the installation.
If you than reboot the tablet again, all the settings are final, and Deep Sleep will work.

My guess is, that as soon as you start messing with the CPU settings, you may loose stability....

Un saludo,

Satbeginner

Unfortunately, even with the first boot after installation goes into deep sleep ...

[giouncino]

Tested Riley's build of maakie firmware and d33 kernel on my tablet: M6 Pro (3G)

LCD - OK
Touchscreen - OK
Audio - OK
Rotation - OK
Camera (Photo / video) - OK

WIFI - Not Working (Logcat reports driver issues (Driver Not Ready messages))
If you turn on Wi-Fi, it throws a bunch of driver errors in Logcat and turns itself off.

Bluetooth - Not Working
Driver errors in Logcat turns itself off when enabled.

[Can't test 3G because my SIM card gets stuck inside, so I just don't use the feature.]

The kernel is really really fast, but there seem to be some driver issues on my tablet.

Are you sure your tablet is an m6pro? and not a m6 without "pro"???
Read the name on the back cover of the tablet.

The GPS is working? (if not present, you have an m6 NON pro)

[Satbeginner]

v1.0 is a new ROM, but with 'standard' settings

I wonder one thing. why do not I have the option of deep sleep and the maximum frequency is 1608 MHz? Before I came to 1704 MHz. Thanks.

The v1.0 ROM is a new build from sources ROM. With your previous ROM you probably used a different kernel that had changed CPU settings, and possibly also changed memory parameters.

I found that this ROM (with its standard settings) is very stable, and even without changing CPU frequencies, it is faster than the previous ROM's.

Deep Sleep does work, but you need to reboot again after the first boot.
After the first boot, the installation process finishes and cleans up the installation.
If you than reboot the tablet again, all the settings are final, and Deep Sleep will work.

My guess is, that as soon as you start messing with the CPU settings, you may loose stability....

Un saludo,

Satbeginner

[annaepi]

Deep sleep

I wonder one thing. why do not I have the option of deep sleep and the maximum frequency is 1608 MHz? Before I came to 1704 MHz. Thanks.

[annaepi]

By removing setup developer, now I get 23790 points.
I thank the developers of rom ......

[fagotistas]

I have installed this Rom in my pipo m6 pro 16/WiFi. I have never enjoyed my tablet like this since I got it. It is so much more snappy and responsive. I am not an expert to test it in detail just an average user. For me one big step is the lack of the sudden death that made the tablet go off and needed to press the reset button on the back , to boot up again. :-)

Στάλθηκε από το M6Pro μου χρησιμοποιώντας Tapatalk

[annaepi]

antutu

Antutu point 22653

[annaepi]

Hooray !!! I inserted a sim card 3G and wi-fi is enabled and bluethoot. Thanks ....

[annaepi]

Wi fi

Hello everyone. I wanted to know one thing: I have seen the model Pipo M6 pro 32 Giga 3g, if I put a card in 3g, wi fi and bluethoot work on this new rom? Thank you very much.

[kryo]

Tested Riley's build of maakie firmware and d33 kernel on my tablet: M6 Pro (3G)

LCD - OK
Touchscreen - OK
Audio - OK
Rotation - OK
Camera (Photo / video) - OK

WIFI - Not Working (Logcat reports driver issues (Driver Not Ready messages))
If you turn on Wi-Fi, it throws a bunch of driver errors in Logcat and turns itself off.

Bluetooth - Not Working
Driver errors in Logcat turns itself off when enabled.

[Can't test 3G because my SIM card gets stuck inside, so I just don't use the feature.]

The kernel is really really fast, but there seem to be some driver issues on my tablet.

[mounoi]

Thanks for this Rom! Flashed it yesterday, Antutu scores through the ceiling (24000+).

However, when I compare wifi speed with my Mipad, difference of day and night: Mipad 16 Mbps, Pipo +-1 Mbps... They sat next to eachother Tested with Speedtest from Ookla, same server...

Anyone else with the same issue?

[stevejc]

Would it possible to get a kernel with same speed/voltage specs as in the kernel provided in rr 1.8.2? (Only one thats worked for me entirely without reboots and freezes). With 1.0 rom the tablet runs better than ever exept for random freezes and reboots. Even miracast works.

You can send me the two kernels files and I will make you same voltage/speed