Kikat - Wasser Firmware for Beelink R89

[The Rogue Tomato]

Replying to my own post above...I put a 5 volt 6 amp supply that I found laying around on my box and it now works well (does not crash after a minute anymore) Not sure If my original supply was a dud or if the firmware was too taxing. Now that it it running, I'll have to start checking it out now. Thank You Wasser!

Brad

Can you share what model power supply you used, or a link to Amazon or something? I'd like to get one but want to know it works, first.

[BP-isMe]

Thank You...That did it. I knew it must be simple.

[michael2t]

Hello Brad,

Click and Hold the Desktop Icons and Drag it to the top of the screen until it turns red ...
Once Red let go and it is deleted ...

That's all there is to it ...

Michael T.

Now that the box runs properly, I notice that I cannot remove Icons from my homescreen. I can move them around but I don't see the familiar trash can when I long press on an Icon. Any help is appreciated.

Brad

[BP-isMe]

Now that the box runs properly, I notice that I cannot remove Icons from my homescreen. I can move them around but I don't see the familiar trash can when I long press on an Icon. Any help is appreciated.

Brad

[BP-isMe]

Thank You...The 6 amp "real" supply does the trick.

Brad

[BP-isMe]

Replying to my own post above...I put a 5 volt 6 amp supply that I found laying around on my box and it now works well (does not crash after a minute anymore) Not sure If my original supply was a dud or if the firmware was too taxing. Now that it it running, I'll have to start checking it out now. Thank You Wasser!

Brad

[lingam]

Something happening...

[BP-isMe]

I upgraded to v 2.07 from the stock firmware. I'm having the issue that the box shuts down after a minute or so. It seems that a few others have posted about this. Has anyone found a solution. I'm wondering if it may be a power supply issue as I sometimes go shutdowns before upgrading. Maybe the new firmware is more taxing on power. Have not found a power supply to try yet.

Thanks...Brad

[mackie]

I'm on Wasser 2.0.7fw , can someone confirm if Hdmi-cec works because I can't, my TV does support Hdmi-cec,
another thing is when I use µTorrent I can't download any torrent, there is always an error the file can't be created.

[zol77]

Hi Wasser,

thnaks for the 2.0.7 fw!
My Ubox is perfect, I used the latest beta SPMC ,and the movie playback is very smooth,no more video shutter,and lag
I play the movies from SMB share with 5Ghz wifi,and no problem.
Skype working with the Logitech C310 webcam (audio-video) , BT Ipega gamepad working,and finally Youtube in 1080p

a question:
1920x1080x120Hz is possible in Android?
The 120Hz is necessary to the DLP Link 3D capable projectors.
http://en.wikipedia.org/wiki/Active_..._system#DLP_3D

[Bentalk]

Wasser 207 firmware work for me perfecly, I won't encounter problem at all!!!

[FunThomas]

i can confirm that the audio muting with wassser 2.0.7 problem here is simply switching to stereo and sometimes back to dolby digital (then its louder again)

i dont know why it switches to stereo and somtimes back

but sometimes it also switches to the stereo bitstream noise

2 times in the first hours the wasser 2.0.7 was frozen and nothing happend in the 2 minutes after
the first time when copying files from external to internal sd card and the second when selecting video in SPMC

But now it worked since 3:30 h without freezing the complete image

Freezes seems to be gone even after restarting and the audio problems seem to occur only one time after rebooting and after it happen -> switching passtrough in SPMC 14.2 off and then on again it works like a charm

Dont tried yet to switch passthrough off and on without the problem if the problem occurs but will do next days

[TitoXx]

Does anybody else have issues with SPMC 14.1-14.2 forcing their TV into 720p every time its launched? This started with Wasser 2.0.7. I have to go back to settings select the desired resolution again. Doesn't happen with Kodi 15 alpha.

Update: This only happens when the system is set at 2160p30, when on 1080p it stays that way in SPMC as well.

[FunThomas]

after installing Wasser 2.0.7 i have the problem that the beelink hangs sometimes for ca. 30sec
First time was in ESExplorer and the second time was in titanium backup when selecting apps to restore

before i had 2.0.3 and that worked with some micro stuttering in video playback

i have no logcat when it hanged but when i lock now into logcat i see often:

E/Lights ( 466): write_int failed to open /sys/class/backlight/rk28_bl/brightness

or when using amazon instant video:
E/ion ( 1109): ioctl ION_IOC_ALLOC(c0144900) failed with code -1: No such device
D/gralloc ( 1109): Force to VMALLOC sucess !
W/gralloc ( 1109): Debugmem The fd=332, in vmalloc !!!! Ishwc=0
E/ion ( 1109): ioctl ION_IOC_ALLOC(c0144900) failed with code -1: No such device
D/gralloc ( 1109): Force to VMALLOC sucess !
W/gralloc ( 1109): Debugmem The fd=333, in vmalloc !!!! Ishwc=0

is it normal ?

Using SPMC 15.1 i have different audio muting sometimes and some switching between stereo and DTS on my Pioneer AV-Receiver when using passthrough.

has someone the same problem ?

so i have to add some more info:
today evening i restored wasser 2.0.3 with twrp backup (there was no kernel restored) so i think i was running my old wasser2.0.3 with 2.0.7 kernel

and with old working spmc 13.4 (i think it was 13.4) and i had a sound crash after nearly 10 min watching movie
my pioneer av-receiver displayed stereo instead of DTS before and there was that noisy sound when hearing DTS bitstream @ stereo

after disabling and enabling passthrough in spmc the sound never crashed in the following about 2:30h of the movie and stayed DTS.

so today i installed Wasser2.0.3 with AndroidTool_Release_v2.3 fresh but the same behave like after restored 2.0.3 with twrp

Sound crashes but never did on 2.0.3 before

What is changed when updating to 2.0.7 and downgrading to 2.0.3 ?

[joolsthebear]

Same issue as with 2.0.6 ... system crashes after a few minutes (especially when opening settings or ES explorer) ... 2.0.3 was the last working version for me (tronfy R89 UBox)