If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
UG802 Finless ROM 1.6 "custom" JellyBean - Made from MK802-3
I dont think you will be able to power on the device using an A-A-Cable.
Tryied yet to start my device connected to a powered USB-Hub and the Device doesn't start.
as i connected the Micro-Usb to my powered Hub the device started.
perhaps you can solder the power-connection from the regular USB-Socket to the Micro-Usb to power on you device
i dont think you will be able to power the device using an A-A-Cable
tryied yet to start my device connected to a powered USB-Hub and the Device doesn't start.
as i connected the Micro-Usb to my powered Hub the device started.
no no, microusb broke ... the only way to start is with usb hub from external power.
hello guys
my microsusb is broken... it works just as power.
i read that you can not do an update easy.
there is a way to do the full update from sd card?
there is recovery like cwm with the possibility to install the firmware from recovery?
no no, microusb broke ... the only way to start is with usb hub from external power.
So my powered logitech usb hub with this cable( http://www.****.com.au/itm/230809764...84.m1497.l2648 ) should work at least to power it up? Was Hoping that the pc would recognize it through this cable! Wish I knew how to solder but I shake too much and prob do more harm than good
Really great job! I installed yesterday and I'm impressed - fast and stable...
By the way: I have a problem with the only one thing: some applications incorrectly identify my location and don't work. Is there any method to simulate the location? I tried to change the network operator code (MNC) in MarketEnabler application - without results. Any ideas?
I was previously running 1.4a flashed using the easy method (ie, sd card). I could not get past the boot into flash mode; the flash tool would recognise the device but when I clicked on reboot to flash mode, I got the error, Device can not boot to flash mode, because of no drive. Browsing through some of the forums, I found this and it worked for me:
Download and install Terminal Emulator from the App Store.
Run Terminal Emulator.
Type "su" <enter>
Type "reboot bootloader" <enter>
The device booted into flash mode and Windows recognised the device and was searching for drivers to install. I cancelled the search and manually selected the drivers in the downloaded zip. The drivers installed and then the flash tool recognised the device and I was able to Erase NANd and then Flash ROM.
When the device restarted, the screen hung at the Android TV logo. I unplugged the device and plugged it back in and it was working.
I've tested the audio synch and it has improved tremendously but it is still out by a tiny margin if you watch closely. Wifi is also not as good as it was in 1.4a and I get droupouts and low signal strength. But all in all, it's a huge improvement and JB is nice.
How can I erase the NAND after drivers are installed ?
Logout. The at the top of the web site login and select the check box "keep me logged in".
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
hello guys
my microsusb is broken... it works just as power.
i read that you can not do an update easy.
there is a way to do the full update from sd card?
there is recovery like cwm with the possibility to install the firmware from recovery?
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment