[ROM] XannyTech Custom Mod Rom + TWRP Recovey built-in - for MINIM8SII and other devices see first post.

[ssarava9]

Bootloader copied? Can you explain... not for me but for the nexbox users what you did?
To be very clear i know what you did... but i'd like you to write it here so other nexbox users can do the same and i can reference your message.

Sure, followed the below steps :

1. Use Amlogic Customization tool v2.0.8 and load Nexbox stock rom, for nexbox a95x 2gb/16gb refer this links "http://www.ismallrt.com/nexbox-a95xs905x-firmware-guides/" , when opening the tool will ask the options to unpack, select Level low (unpack first image level) and select all options under it
2. After unpacking success, go to C:\Program Files (x86)\Amlogic\CustomizationTool\tmp\level1 and copy "bootloader.partition" , "ddr.ush" and "uboot.usb" into a different folder where you can go back later
3. Now using amlogic customization tool load the Xanny awesome firmware and repeat step 1
4. Now copy the nexbox 3 boot files where you saved in step 2 and go to C:\Program Files (x86)\Amlogic\CustomizationTool\tmp\level1 and paste them
5. copy and replace all 3 files
6. Now return to tool and select Pack, now it will ask for the new image file name, give a different file name and folder where you want to save the image with new nexbox bootloader
7. Use Amlogic usb burning tool and flash it to the box, you are all set

Note: if you want to copy the stock remote configuration files please do that before the above steps, to copy stock remote file to your usb drive, go to Root browser and under etc folder select remote.confg copy and save it for future reference in a different drive
After flashing the custom rom, go to your usb drive copy the remote.config file and paste it to etc folder

Thats all, you are all set, let me know for any questions.

[fluoir]

I posted it in mid august:
XTMOD Android TV Beta 3 for TvBoxes with wifi chipset : AP62X2, AP4354, AP4356, AP6212, AP6212A, AP6255, AP6335, AP43458, AP6330, 9082XX, 8188XX, 8189XX, 8192XX, 8723XX (bluetooth does not work), 8812XX
If you have a 9377 wifi chip device flash the image, ater the first boot, go to recovery and install this file:
- wifi 9377 twrp file

Thank you.
So I tried it on my Nexbox A95x and I would like to share details of bugs I have come across.
1. I like to use Vysor app for controlling box via LAN with laptop keyboard and when I tried to connect I got message "SystemUI has stopped" and it crashes (dev. options and debugging were on - It works on your XTMOD 3.0).
2. Right after initial setup I get message "Unfortunately Android TV remote Services has stopped"
3. I have used AML Cusom. tool to add few more apps into apk.zip in /media folder - like eg. my VPN app and Titanium Backup and others. My VPN app got installed but others like Titanium did not.
(all added apps were able to install on XTMOD 3.0 rom though)
4. When I Power off box with IR remote I can not wake up the box (nexbox remote.conf copied properly). It also doesn't work on XTMOD 3.0 but I remember waking up worked in XTMOD 2.6 beta.
5. After few minutes of inactivity box powers off. That wouldn't be the problem itself but I can't wake it up with remote. If I remember correctly there should be power on button setting somewhere in settings but I either can't remember where or it is missing.
That is it so far...
Also ...just a suggestion...could you make a separate thread for this android tv rom with details what you have changed like you are doing with XTMOD rom?

[Xannytech]

Excellent Android tv Rom, works great on my nexbox 2/16GB with bootloader copied so its perfect, thanks and waiting for final android tv release
Thanks Xannytech

Bootloader copied? Can you explain... not for me but for the nexbox users what you did?
To be very clear i know what you did... but i'd like you to write it here so other nexbox users can do the same and i can reference your message.

[ssarava9]

I posted it in mid august:
XTMOD Android TV Beta 3 for TvBoxes with wifi chipset : AP62X2, AP4354, AP4356, AP6212, AP6212A, AP6255, AP6335, AP43458, AP6330, 9082XX, 8188XX, 8189XX, 8192XX, 8723XX (bluetooth does not work), 8812XX
If you have a 9377 wifi chip device flash the image, ater the first boot, go to recovery and install this file:
- wifi 9377 twrp file

Excellent Android tv Rom, works great on my nexbox 2/16GB with bootloader copied so its perfect, thanks and waiting for final android tv release
Thanks Xannytech

[chob]

I posted it in mid august:
XTMOD Android TV Beta 3 for TvBoxes with wifi chipset : AP62X2, AP4354, AP4356, AP6212, AP6212A, AP6255, AP6335, AP43458, AP6330, 9082XX, 8188XX, 8189XX, 8192XX, 8723XX (bluetooth does not work), 8812XX
If you have a 9377 wifi chip device flash the image, ater the first boot, go to recovery and install this file:
- wifi 9377 twrp file

Hello,
Can we install this rom on Mini M8S II Smart TV Box 4K Digital Processor Amlogic S905X Quad Core - 2GB + 8GB EU Plug.
What else does XTMOD 3.0 have?
thank you in advance

[Xannytech]

Good morning! I apologize for English, (unfortunately I am an old man and I know slo Italian) use google translator ...
To update my box until a few months ago I used the "toothpick" method, now things have changed?
I thank those who want to answer me.

ok old man, i do not think the method of flashing changed so much, usb male to male is the best and less risky way, then usign SdBurn card maker, through recovery. For a matter of free time and for various reason i do not support anymore twrp flashable zips or as wrongly named from someone OTA zip files (they are not OnTheAir files... anyway ).
N.B.
Se hai problemi con l'inglese scrivimi via P.M.

[Roby34]

Good morning! I apologize for English, (unfortunately I am an old man and I know slo Italian) use google translator ...
To update my box until a few months ago I used the "toothpick" method, now things have changed?
I thank those who want to answer me.

[Xannytech]

Hi, Xannytech Where did you posted your new XTmod Android tv rom? I can't wait to try it. I searched all posts and couldn't find it. Can you give a link please?

I posted it in mid august:
XTMOD Android TV Beta 3 for TvBoxes with wifi chipset : AP62X2, AP4354, AP4356, AP6212, AP6212A, AP6255, AP6335, AP43458, AP6330, 9082XX, 8188XX, 8189XX, 8192XX, 8723XX (bluetooth does not work), 8812XX
If you have a 9377 wifi chip device flash the image, ater the first boot, go to recovery and install this file:
- wifi 9377 twrp file

[ssarava9]

You cannot switch easily to Android TV mode...
You should change all the etc/permissions .xml config files, then probably you need the android tv framework and all the Android tv gapps.
Anyway it's not a rom fault, the developer of that app has to work a little more programming the game... a good example of good programming is Beach buggy Racing works with gamepad, with touch controls and also with acelerometer controls.

Thanks Xannytech , i will try a different game and waiting for your android tv ROM to try it out
Thanks for all the support

[fluoir]

Hi, Xannytech Where did you posted your new XTmod Android tv rom? I can't wait to try it. I searched all posts and couldn't find it. Can you give a link please?

Thank you.

[Xannytech]

Is there a way to change the screen interface from phone / tablet mode to Android tv mode in this ROM ? few of my games detects the firmware as phone and only allows touch controls, i would like to use my gamepad but that works only on Android TV firmware, but i believe there should be an option to change the compatibility to Android tv mode.
Can someone please advise on this ?

I'm using Nexbox A95 2gb/16gb

You cannot switch easily to Android TV mode...
You should change all the etc/permissions .xml config files, then probably you need the android tv framework and all the Android tv gapps.
Anyway it's not a rom fault, the developer of that app has to work a little more programming the game... a good example of good programming is Beach buggy Racing works with gamepad, with touch controls and also with acelerometer controls.

[ssarava9]

Is there a way to change the screen interface from phone / tablet mode to Android tv mode in this ROM ? few of my games detects the firmware as phone and only allows touch controls, i would like to use my gamepad but that works only on Android TV firmware, but i believe there should be an option to change the compatibility to Android tv mode.
Can someone please advise on this ?

I'm using Nexbox A95 2gb/16gb

[Xannytech]

Hi Xanny,

What do you think, is there any chance to recover from this:

GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EM MC:0;READ:0;0.0;CHK:0;
TE: 47693

BL2 Built : 13:48:56, Sep 23 2016.
gxl g7459bd4 - jianxin.pan@droid06

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 2
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 720MHz - FAIL
DDR3 chl: Rank0 @ 720MHz - FAIL
DDR3 chl: Rank0 16bit @ 720MHz - PASS
Rank0: 1024MB-2T-11
DataBus test pass!
ADDR-W[0x20000000]:0xaaaaaaaa,R:0xc3512a13
ADDR3-W[0x00000004]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000008]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000010]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000020]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000040]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000080]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000100]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000200]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000400]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000800]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00001000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00002000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00004000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00008000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00010000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00020000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00040000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00080000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00100000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00200000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00400000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00800000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x01000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x02000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x04000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x08000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x10000000]:0x55555555,R:0x3caed5ec
AddrBus test failed!!!

I can reach the box by an FTDI232 module but DDR configuration seems to be wrong. Do I have any hope to use the USB Burning Tool?

please...
1rst... which device is?
2nd for sure you need:
- Amlogic Usb Burning tool
- Usb male to male cable
- original fw for your device in .img format

Then you should try to flash it with your original fw.
3rd I have no idea of what you did, so how can help you?
4rth i'm not really a chinese box help center i know you need help but.. you know... forum rules netiquette etc. etc.

[duntax]

Hi Xanny,

What do you think, is there any chance to recover from this:

GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EM MC:0;READ:0;0.0;CHK:0;
TE: 47693

BL2 Built : 13:48:56, Sep 23 2016.
gxl g7459bd4 - jianxin.pan@droid06

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 2
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 720MHz - FAIL
DDR3 chl: Rank0 @ 720MHz - FAIL
DDR3 chl: Rank0 16bit @ 720MHz - PASS
Rank0: 1024MB-2T-11
DataBus test pass!
ADDR-W[0x20000000]:0xaaaaaaaa,R:0xc3512a13
ADDR3-W[0x00000004]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000008]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000010]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000020]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000040]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000080]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000100]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000200]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000400]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000800]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00001000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00002000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00004000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00008000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00010000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00020000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00040000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00080000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00100000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00200000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00400000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00800000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x01000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x02000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x04000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x08000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x10000000]:0x55555555,R:0x3caed5ec
AddrBus test failed!!!

I can reach the box by an FTDI232 module but DDR configuration seems to be wrong. Do I have any hope to use the USB Burning Tool?

[Xannytech]

[QUOTE=cubasekid;n677532]

***UPDATE***

OK i spoke to soon!
all was working great until i added SD card as extra internal storage. selecting to use as internal storage and migrating data completed without error however, i found no apps moved to the card and if i try to manually move app by app i get 'no available space' error

i cant see the SD card in es file explorer, it only shows the internal storage. if i look in Kodi or SPMC file manager i can only find internal also, all i can see is 'sd card' and this shows the internal storage. There is no way to find the external card. if i look in android settings it shows internal and sd card but i only have option to 'explore' internal. the option does not show if i select the SD card.

I found however if I install new app from play store i am able to move to the SD so reinstalled SPMC then moved it.

all good i thought until i restored SPMC back up, it filled internal storage until there was no space left and SPMC would no longer open :-(

i tried with two different SD cards that work fine in this way if i format them as internal on other devices.

i thought maybe something had gone awry flashing in the first instance so flashed again and configured from scratch but got the same result, then tried again with the SD inserted through the flashing process in the vain hope it may get wiped / set up it but was just left ready for me to pick as additional or internal storage, and gave same results again...[/QUOTE]

That's Android 6.01 not me Internal memory it's for the system an extension of the internal memory, android 4 or 5 worked differently.