MK808B_digitopMod_MINIX_NEO-G4_port (0730) _Sep2013

[prahjister]

thanks Prahjister
where could i find you 1.2 version please ?
(i find http://www.freaktab.com/showthread.p...tek-WiFi/page2)

wich android is it ? 4.1 or 4.2?

its 4.2

http://www.freaktab.com/showthread.php?17569-Prahjister-Roms-MK808-B-and-non-B-original-and-MK808-V5-Realtek-and-some-other-stuff

Had to move it to another server...too many people were downloading from my google drive.

[ILoveBugMeNot]

thanks Prahjister
where could i find you 1.2 version please ?
(i find http://www.freaktab.com/showthread.p...tek-WiFi/page2)

wich android is it ? 4.1 or 4.2?

[prahjister]

Its a genuine 808b, it has the RK903 chip....
Thanks

Then try my 1.2 version.

[jesusodin]

Need to crack that baby open and validate the wifi chip that you have.

http://www.freaktab.com/showthread.php?3880-MK808B-clones-how-to-identify-them

If you bought it recently it probably a v5 with realtek wifi. Then my 1.1 works really well. I only have one issue to sort out. If you turn the tv off after a short time the stick will turn off. If this is an issue. Use 1.0

Its a genuine 808b, it has the RK903 chip....
Thanks

[prahjister]

Hello Prahjister; What will be a good rom now for an original 808b?

Need to crack that baby open and validate the wifi chip that you have.

http://www.freaktab.com/showthread.php?3880-MK808B-clones-how-to-identify-them

If you bought it recently it probably a v5 with realtek wifi. Then my 1.1 works really well. I only have one issue to sort out. If you turn the tv off after a short time the stick will turn off. If this is an issue. Use 1.0

[jesusodin]

You will be going backwards flashing this rom....At the time it was good.

Hello Prahjister; What will be a good rom now for an original 808b?

[prahjister]

hi everyone

i'm new here and i have a little question:

i have an original MK808B with android 4.2 (original firmware)
i understand that in order to use this custom firmware i need to flash a 4.1 android using Finless explanations & then i could install DigitopMod_MINIX_NEO-G4 using the CWM.

is it correct ?

Thanks !

You will be going backwards flashing this rom....At the time it was good.

[ILoveBugMeNot]

hi everyone

i'm new here and i have a little question:

i have an original MK808B with android 4.2 (original firmware)
i understand that in order to use this custom firmware i need to flash a 4.1 android using Finless explanations & then i could install DigitopMod_MINIX_NEO-G4 using the CWM.

is it correct ?

Thanks !

[inflock]

Ynt: MK808B_digitopMod_MINIX_NEO-G4_port (0730) _Sep2013

Solved... Deleted.

GT-N7000...

[phinc]

wizifreak is right, the problem is the update.zip method. you can't flash between android versions this way. Your device came with Android 4.2.2, this rom is Android 4.1, so if you want to install this rom, you have to flash a 4.1.1 rom via flash tool first. Because your device does not start any more, you probably have to get into flash mode with the reset button method (see finless rom readme for details).

[Purjo]

From the pics you posted seems a genuine board, no clone.
I think that the update.zip way works only on roms prior to 4.2, so maybe there's the problem.
Flash another rom, maybe finless 1.7, and then try again the update.zip way or an easier way is to install this and reboot into CWM.
Then you can flash digitopmod's rom. Dont forget to format sd partitions before flashing the new rom.
Finally you should also try MK808/B_digitopMod_v3.5_WALKMAN_Nov2013

Hope it works out.

Hi. Thanks for the advise I really appreciate all the help. I realize im a noob here but if I just want to get it back to original, how would I do? I haven´t adjusted any setting in the device, can I still access it om PC? As I said i´m a rookie.

Thx!

[wizifreak]

Hi. I´m very new to this, but the instructions seemed easy enough. After pressing install update there was an android for a few seconds and then the screen went black. I´ve tried to restart with and without resetbutton. Is there any way to get my device back on track?

From the pics you posted seems a genuine board, no clone.
I think that the update.zip way works only on roms prior to 4.2, so maybe there's the problem.
Flash another rom, maybe finless 1.7, and then try again the update.zip way or an easier way is to install this and reboot into CWM.
Then you can flash digitopmod's rom. Dont forget to format sd partitions before flashing the new rom.
Finally you should also try MK808/B_digitopMod_v3.5_WALKMAN_Nov2013.

Hope it works out.

Does this rom support HDMI passthrough? Can someone check in Settings - Sound - Sound devices if there are three sound devices: Rockchip HDMI, Rockchip HDMI Multi5.1 and Rockchip HDMI Passthrough.

Another question: if I boot into CWM how can I select different menu items. My experiences so far are that neither keyboard and mouse could be used.

As i far i can remember it doesnt support HDMI passthrough.

Not even with keyboard...? I scroll with my mouse on CWM.
Just browse up/down and lclick to select.
Maybe you ve used an older version.
Install CWM through com.arctablet.arctool. It should work.

[jockyw2001]

Does this rom support HDMI passthrough? Can someone check in Settings - Sound - Sound devices if there are three sound devices: Rockchip HDMI, Rockchip HDMI Multi5.1 and Rockchip HDMI Passthrough.

Another question: if I boot into CWM how can I select different menu items. My experiences so far are that neither keyboard and mouse could be used.

[Purjo]

Got it from geekbuying this year.

[phinc]

Maybe you have a clone. Open your case and post photos of the hardware inside, then we can tell you more.

Sent from my GT-I9100 using Tapatalk