[ROM] XTMOD-ATV X96 Max - GT1 and some U211 devices - S905X2 Android 8.1 [Android TV]

[TheBlackening]

I wouldn't do the "Erase all"
In some cases, somehow the box loses the wifi MAC address.

I would recommend doing the short NAND pin method.
I had a similar situation with a X96 Mini.
After installing the ROM from a W95, the only way I could install another ROM was through short NAND pin method.

I hope it helps
Cheers

Enviado do meu POCOPHONE F1 atrav?s do Tapatalk

[Appdata]

Hi guys,

How are you all?

I have a question if someone wants to help me :-). I have an X96 MAx 4/64 and i can't load a firmware anymore sinds i load the firmware from Xannytec "XTM_ATV_X96_4_4.img".
I get 2 kind of issues.

The first issue, i get it every time. Its a partition_aml_dtb issue it stops everytime there (see Picture as attachment).

The second issue come from the firmware made by Xannytec. The first time i load it, it was good, and works great. The box started and i tested the firmware. After that wanted to go back to the original firmware but it didn't work. I got the bootlogo loop issue. I tried to reload the firmware from Xannytec back again and now i get the vendor issue (see picture as attachment).

I really tried everything (bootmaker, burncard maker, twrp, recovery, wipe data, i tried also every kind of firmware on USB or SDCard, Shortcut, etc.) nothing works :-(

Does someone know this issue maybe? Or know how to deal with this issue?

That are the specs of my hardware:

X96 max 4/64

4+64+6356
ZF190326

Logicboard Q5X2 v5.5 19015

Thank you very much everyone for helping me :-)

Try 'Erase all' and check the 'Whether overwrite key'

[Prins_007]

Hi guys,

How are you all?

I have a question if someone wants to help me :-). I have an X96 MAx 4/64 and i can't load a firmware anymore sinds i load the firmware from Xannytec "XTM_ATV_X96_4_4.img".
I get 2 kind of issues.

The first issue, i get it every time. Its a partition_aml_dtb issue it stops everytime there (see Picture as attachment).

The second issue come from the firmware made by Xannytec. The first time i load it, it was good, and works great. The box started and i tested the firmware. After that wanted to go back to the original firmware but it didn't work. I got the bootlogo loop issue. I tried to reload the firmware from Xannytec back again and now i get the vendor issue (see picture as attachment).

I really tried everything (bootmaker, burncard maker, twrp, recovery, wipe data, i tried also every kind of firmware on USB or SDCard, Shortcut, etc.) nothing works :-(

Does someone know this issue maybe? Or know how to deal with this issue?

That are the specs of my hardware:

X96 max 4/64

4+64+6356
ZF190326

Logicboard Q5X2 v5.5 19015

Thank you very much everyone for helping me :-)

[JoeGamer]

version 5.5.0 took like 20s to unpack it, version 4.0.0 didn't unpack it aven after 12 hours. Version 6 is crashing..

[raruba]

[QUOTE=JoeGamer;n782931]Hi raruba,

how long did it took to unpack the image?[/
Maybe 5 mins., but tha'ts it you can't do anything else with it...can't modify or repack...so its useless

[JoeGamer]

Hi raruba,

how long did it took to unpack the image?

[raruba]

The problem is, that the version 6.0 si crashing, version 5.5 was working, but got that Legacy error and version 4 is unpacking the img, but after like 10hours the header.bin file was like 24GB..

Yeah JoeGamer I agree Ricky's factory tool 6.0 don't work for me at all, 4.0 is the only one that unpacks, but that's about it....nothing else.

[JoeGamer]

I think it is possible to do it with amlogic tools 6.0.
But I'm not sure

Enviado do meu POCOPHONE F1 atrav?s do Tapatalk

The problem is, that the version 6.0 si crashing, version 5.5 was working, but got that Legacy error and version 4 is unpacking the img, but after like 10hours the header.bin file was like 24GB..

[raruba]

Has anyone been able to flash TWRP to the X96Max 4G 9.0_V311P_20190722.img??? I have tried and it just reboots the box every time.

[JoeGamer]

I have the most recent for this device.. I need help with the creation of a flashable ZIP, maybe someone can help me out..

[TheBlackening]

Yes, I have created a flashable zip with amlogic tools, but I was unable to install it. Every time i got a Legacy property environment did not initialize successfully, error 6.

Maybe you need a more recent version of TWRP? :/

Enviado do meu POCOPHONE F1 atrav?s do Tapatalk

[JoeGamer]

Yes, I have created a flashable zip with amlogic tools, but I was unable to install it. Every time i got a Legacy property environment did not initialize successfully, error 6.

[TheBlackening]

Hi Xannytech,

Is there a way to extrack the img and create a flashable ZIP file, as I've tried and got TWRP Legacy error and the code was 6. Right now my device is a brick..

Thank you.

I think it is possible to do it with amlogic tools 6.0.
But I'm not sure

Enviado do meu POCOPHONE F1 atrav?s do Tapatalk

[JoeGamer]

Hi Xannytech,

Is there a way to extrack the img and create a flashable ZIP file, as I've tried and got TWRP Legacy error and the code was 6. Right now my device is a brick..

Thank you.

[raruba]

Xannytech



Good day Hello.
I think based on this firmware X96Max 4G 9.0_V311P_20190722.img will be much better to do Android 9.0 XTMOD-ATV X96 Max 4/32 V 5.0

https://drive.google.com/open?id=1-1...NdSW2oRncxOQIb
or this one Finally, we recently upgraded the firmware for GT-King and GT1 mini, and the GT1 mini 95X2 version can now be upgraded to Android 9.0.

https://forum.freaktab?event-awards-announced

Does this GT1 mini 95X2 firmware work on the x96 Max??? And has anyone been able to flash TWRP to the X96Max 4G 9.0_V311P_20190722.img?????