[ROM] XTMOD-ATV X96 Max - GT1 and some U211 devices - S905X2 Android 8.1 [Android TV]

[Prins_007]

you'll test the new fw when i'll release it (i hope you understand i need few days), anyway seems to me a usb problem or a memory problem, i got the very same device and i fLashed everything on it without any problem, eventually you tried to flash resetting the nand?

The issue is that the firmware stop at aml dtb check if its a firmware from other sites or stop at Vendor check if its from ATV. With usb cable or micro SD i get always the same issue.
Flash resetting the nand is there any method that i can follow?

[Xannytech]

I really tried everything. Before ATX firmware there was no issue all things goes ok. But after ATX the first time all ok tried the firmware but after a few days get the bootloop it start but keep rebooting. Kan i also try the new firmware? I have also a X96 Max 4/64 maybe it will work?

you'll test the new fw when i'll release it (i hope you understand i need few days), anyway seems to me a usb problem or a memory problem, i got the very same device and i fLashed everything on it without any problem, eventually you tried to flash resetting the nand?

[Prins_007]

Hi, i do not remember which device are you using, try with Amlogic tools 2.1.7.0, try to change usb cable, or port. But the good part is the bootloader it's working.

I really tried everything. Before ATX firmware there was no issue all things goes ok. But after ATX the first time all ok tried the firmware but after a few days get the bootloop it start but keep rebooting. Kan i also try the new firmware? I have also a X96 Max 4/64 maybe it will work?

[Xannytech]

Xannytech
Can it be tested already XTMOD-ATV9 X96 Max?

You got PM

[nikito7989]

[QUOTE=Xannytech;n788975]

Can it be tested already XTMOD-ATV9 X96 Max?

[Xannytech]

Hi Xannytech,

Welkom back, i hope that your father will be well and get soon better.

Dear friend can you maybe help me to solve my issue? I have a problem with the ATX firmware for the X96 max 4/64. Its now about 4 months ago the box is in a bootloop mod. I tried everything to get it back to normal but nothing works yet. If i try your firmware again it get stuck at vendor parts. 97-98% and if i try other firmwares it get stuck at 10% aml dtb. Do you know whats the problem hier? Thank you very much.

Hi, i do not remember which device are you using, try with Amlogic tools 2.1.7.0, try to change usb cable, or port. But the good part is the bootloader it's working.

[Prins_007]

Hi Xannytech,

Welkom back, i hope that your father will be well and get soon better.

Dear friend can you maybe help me to solve my issue? I have a problem with the ATX firmware for the X96 max 4/64. Its now about 4 months ago the box is in a bootloop mod. I tried everything to get it back to normal but nothing works yet. If i try your firmware again it get stuck at vendor parts. 97-98% and if i try other firmwares it get stuck at 10% aml dtb. Do you know whats the problem hier? Thank you very much.

[nikito7989]

Xannytech
Can it be tested already XTMOD-ATV9 X96 Max?

[alessa]

Hello . the pie version of the rom is out?

[soldiaz]

Xannytech : did I get you right: you are going to release a xtmod PIE ATV rom and after this youll switch to S905x3?

[bergie2222]

I downloaded the firmware , I’m getting a error when I burn at 3% rom code boot stage error not sure why this is happening as I’ve burned other roms in the past with no issues also using the new version of the burn tool 2.1.7 if anyone has any suggestions that would be greatly appreciated thanks in advance thank you for your work

[huffmybrd]

nikito7989 : Which files did you replace? The libs within the vendor dir? And file permission 644? I ask since I downloaded 2 archives:

decoders_pie
vendor

What about the stock file issue? huffmybrd

Replacing the hosts file with the one xannytech posted fixed my issues with not beging able to log into trakt.tv.

Edit: the one included with the rom was almost 2mb. The one xannytech posted for me is only 100kb-200kb (cant rember exact sizes)

[soldiaz]

nikito7989 : Which files did you replace? The libs within the vendor dir? And file permission 644? I ask since I downloaded 2 archives:

decoders_pie
vendor

What about the stock file issue? huffmybrd

[nikito7989]

Xannytech
Bug it's on android 9 firmwares.
In fact, it is enough to replace only amvdec_h264mvc.ko, but just in case, I changed all the modules.



For me it works on the X96 Max.

[huffmybrd]

if you're on my firmware and magisk it's updated... it's really weird obviously it's not a matter of memory.

HERE is the stock host.

I am using your rom. The v3. That's hosts file fixed my issue, thank