[ROM] XTMOD-ATV X96 Max - GT1 and some U211 devices - S905X2 Android 8.1 [Android TV]

[sxcjb]

Load the Rom then press the start button, hold reset on the box with pin...then plug in the USB to box (blue 3.0) cord that is plugged into your computer, then quickly plug in the power cord to the box also and wait for the beep beep, release reset button then...should load for you

As you said, it will still be wrong！

[raruba]

X96 Max 4/64, please help me, the problem with the brush machine.
Thanks for reading

Load the Rom then press the start button, hold reset on the box with pin...then plug in the USB to box (blue 3.0) cord that is plugged into your computer, then quickly plug in the power cord to the box also and wait for the beep beep, release reset button then...should load for you

[sxcjb]

X96 Max 4/64, please help me, the problem with the brush machine.
Thanks for reading

[Prins_007]

Not the yellow dots below are.

Thank you for responding me. And do you know what the steps are? Wat to doe first and when shortcut, how long to shortcut etc

[nikito7989]

Is the shortpin in the picture correct?
thank you :-)

Not the yellow dots below are.

[Prins_007]

i don't think a different firmware could solve your problem, if any other solution like using amlogic 2.1.7.X or changing usb cable are excluded, i suggested you to reset the nand, shorting pins (it's pretty easy). if the device cannot completely flashed after nand reset, the only problem it's your pc/usb/cable/program.
do you loaded the firmare and then clicked start, and just then connected your device?

Is the shortpin in the picture correct?
thank you :-)

[Xannytech]

Oh i tried this one it give me the aml issue. I tried maybe 100 or more firmwares always the same :-( i hoop that the firmware that you are building will help.

i don't think a different firmware could solve your problem, if any other solution like using amlogic 2.1.7.X or changing usb cable are excluded, i suggested you to reset the nand, shorting pins (it's pretty easy). if the device cannot completely flashed after nand reset, the only problem it's your pc/usb/cable/program.
do you loaded the firmare and then clicked start, and just then connected your device?

[salehdeh76]

I am trying to burn firmware on my box but encountering this error in the log of burning tool.

[11:14:15 562]BL2 report Error, code= 32
[11:14:15 563][HUB3-5]cmd error, cmdType:43984
[11:14:15 563][HUB3-5]Aml_Libusb_bl2_boot2 end!
[11:14:15 563][HUB3-5][Inf]--Release Semaphore
[11:14:25 736][HUB3-5][Inf]--Detect Device remove timeout [11:14:25 736][HUB3-5][Inf]--Device is connected
[11:14:25 736][HUB3-5][Inf]--Close device handle 0x00000930 [11:14:25 787][HUB3-5][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&1e7d8db7&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000930 [11:14:30 838]
[HUB3-5][Inf]--0-0-1-8 [11:14:30 838][HUB3-5][Err]--CheckFileRunState failed
[11:14:30 843][HUB3-5][Err]--[0x10303004]Romcode/Switch status/Identify/Error result

[11:14:30 844][HUB3-5][Inf]--Close device handle 0x00000930

Anyone knows what is the error code “32” in BL2 and why this may happen? I tried several firmwares but no effect!

Thanks

[Prins_007]

i simply googled it

https://chinagadgetsreviews.com/down...-tv-box-2.html

Oh i tried this one it give me the aml issue. I tried maybe 100 or more firmwares always the same :-( i hoop that the firmware that you are building will help.

[Xannytech]

Do you know where i can find a full firmware 8.1?

i simply googled it

https://chinagadgetsreviews.com/download-android-oreo-8-1-firmware-for-x96-max-tv-box-2.html

[Prins_007]

I think you tried with power connected... during usb flashing.
so or you got a problem on your nand memory or try to reset it shourtcirtuing two pin and hope it will flash back a full firmware, got no more ideas.

Do you know where i can find a full firmware 8.1?

[bergie2222]

you cannot root it thru magisk at now because of the system-on-root , so, just use the custom rom rooted yet with old methods.

Thank you for your answer, but what is the rooted custom yet with old methods This one XTMOD-ATV X96 Max - GT1 and some U211 devices - S905X2 Android 8.1 again thanks for your help. is root ?

[Xannytech]

The issue is that the firmware stop at aml dtb check if its a firmware from other sites or stop at Vendor check if its from ATV. With usb cable or micro SD i get always the same issue.
Flash resetting the nand is there any method that i can follow?

I think you tried with power connected... during usb flashing.
so or you got a problem on your nand memory or try to reset it shourtcirtuing two pin and hope it will flash back a full firmware, got no more ideas.

[Xannytech]

how to root this device x96 max 4/32 android 9 help please thank you.

you cannot root it thru magisk at now because of the system-on-root , so, just use the custom rom rooted yet with old methods.

[bergie2222]

how to root this device x96 max 4/32 android 9 help please thank you.