[ROM] XTMOD-ATV X96 Max - GT1 and some U211 devices - S905X2 Android 8.1 [Android TV]

[patience1973]

it means if you got different bluetooth or ddr3 in that case V311R, but you can try in the worst case bluetooth will not work

Thanx I will try

[dude75]

Thanks for android tv 9. It works for me by adding dolby vision. the audio quality is much better and the video with iptv too, the refresh is excellent. Just a problem,when i try to write a text, the keyboard virtuel hides (get down) with only G10 remote control. thanks for the work

[tithitoy]

Magisk not working. So sad.

[Xannytech]

Hi Xannytech, thanx for the update!! How do I check if my device is based on V311P Firmware? sorry for the noob question.
Gr. Patience88

it means if you got different bluetooth or ddr3 in that case V311R, but you can try in the worst case bluetooth will not work

[delgranada]

load the rom, click start, then insert the cable, no need to click reset button

muchas gracias, ya lo tengo funcionando. no he apretado el boton reset y ha funcionado a la primera

[soldiaz]

So it's ATV Android 9 time.
For a couple of week i'll be very busy in RL, so XTM_X96M4G_ATV9_V1_0 here it is. It's for X96Max 4Gb based on V311P firmware so flash according with your device. Then after a couple of week i'll release the same rom for X96Max 2G and X96Max V311R.
Enjoy

N.B.
I'll post this rom in first page after a while so do not lost the link.

yeaaaaah thnaks so much

[patience1973]

So it's ATV Android 9 time.
For a couple of week i'll be very busy in RL, so XTM_X96M4G_ATV9_V1_0 here it is. It's for X96Max 4Gb based on V311P firmware so flash according with your device. Then after a couple of week i'll release the same rom for X96Max 2G and X96Max V311R.
Enjoy

N.B.
I'll post this rom in first page after a while so do not lost the link.

Hi Xannytech, thanx for the update!! How do I check if my device is based on V311P Firmware? sorry for the noob question.
Gr. Patience88

[tithitoy]

So it's time of ATV Android 9
For a couple of week i'll be very busy in RL, so XTM_X96M4G_ATV9_V1_0 here it is. It's for X96Max 4Gb based on V311P firmware so flash according with your device. Then after a cople of week i'll release the same rom for X96Max 2G and X96Max V311R.
Enjoy

N.B.
I'll post this rom in first page after a while so do not lost the link.

Thanks for your work. I will try and report back later

[Xannytech]

So it's ATV Android 9 time.
For a couple of week i'll be very busy in RL, so XTM_X96M4G_ATV9_V1_0 here it is. It's for X96Max 4Gb based on V311P firmware so flash according with your device. Then after a couple of week i'll release the same rom for X96Max 2G and X96Max V311R.
Enjoy

N.B.
I'll post this rom in first page after a while so do not lost the link.

[Xannytech]

hola tengo un x96 s905x2 de 4/64gb con android 9. estoy intentado instalar la rom de ATV . mediante cable y no me deja. he probado con las 2 versiones de USB burning tool. 2.1.6.8 y la 2.1.7 y no funcionan. desde el usb 3.0 cable macho-macho y con el reset presionado. en el 3% me da error? RomcodeBI2_Boot stage Error? . lo he intentado por tarjeta SD y tampoco. que puedo hacer???

load the rom, click start, then insert the cable, no need to click reset button

[delgranada]

hola tengo un x96 s905x2 de 4/64gb con android 9. estoy intentado instalar la rom de ATV . mediante cable y no me deja. he probado con las 2 versiones de USB burning tool. 2.1.6.8 y la 2.1.7 y no funcionan. desde el usb 3.0 cable macho-macho y con el reset presionado. en el 3% me da error  RomcodeBI2_Boot stage Error  . lo he intentado por tarjeta SD y tampoco. que puedo hacer???

[Xannytech]

Thank you. Now I get an error about DTB mismatch:

BULKcmd[disk_initial 1]
Amlogic multi-dtb tool
GZIP format, decompress...
Multi dtb detected
Multi dtb tool version: v2 .
Support 4 dtbs.
aml_dt soc: g12a platform: u211 variant: 2g
dtb 0 soc: g12a plat: s905x2 vari: u211
dtb 1 soc: g12a plat: u212 vari: 1g
dtb 2 soc: g12a plat: u212 vari: 2g
dtb 3 soc: sm1 plat: ac213 vari: 2g
Not match any dtb.
start dts,buffer=0000000001000000,dt_addr=0000000073e5dd50
check_valid_dts: FDT_ERR_BADMAGIC
get_partition_from_dts() 105: ret -9
get_partition_from_dts() 108: ret -9
ERR(../drivers/usb/gadget/v2_burning/v2_common/optimus_download.c)L783:Failed at check dts
[info]failed:

Is DTB inside uboot causes problem?

Also please tell me which uboot source tree you are using?

Thanks

hmmm Uboot from U211 sources, you need your device dtb.PARTITION i can't find it.

[salehdeh76]

https://mega.nz/#!hpEAVQAQ!9TZRkKMW7...MqWgNx6RWTEqTo
Sorry but i cannot give you sources

Thank you. Now I get an error about DTB mismatch:

BULKcmd[disk_initial 1]
      Amlogic multi-dtb tool
      GZIP format, decompress...
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 4 dtbs.
        aml_dt soc: g12a platform: u211 variant: 2g
        dtb 0 soc: g12a   plat: s905x2   vari: u211
        dtb 1 soc: g12a   plat: u212   vari: 1g
        dtb 2 soc: g12a   plat: u212   vari: 2g
        dtb 3 soc: sm1   plat: ac213   vari: 2g
      Not match any dtb.
start dts,buffer=0000000001000000,dt_addr=0000000073e5dd50
check_valid_dts: FDT_ERR_BADMAGIC
get_partition_from_dts() 105: ret -9 
get_partition_from_dts() 108: ret -9
ERR(../drivers/usb/gadget/v2_burning/v2_common/optimus_download.c)L783:Failed at check dts
[info]failed:

Is DTB inside uboot causes problem?

Also please tell me which uboot source tree you are using?

Thanks

[Xannytech]

Nice to hear that. I tried some roms but it has bugs like no remote , no led, Google assistant not working. They builded from mibox S AtV 9 beta I think so.

mine it's not based on a existing firmware, the only problem it has is that some users find some bugs on iptv apps, no matter which "decoders" they put in, seems V311R it's ok, so i'm doing experimentations

[tithitoy]

sorry trying to solve an issue found from some beta testers, i'll post the firmware when it's solved

Nice to hear that. I tried some roms but it has bugs like no remote , no led, Google assistant not working. They builded from mibox S AtV 9 beta I think so.