[ROM] Beelink GT1-Mini (and some others) AndroidTV v.2.0 by Sasvlad Android 9.0

[kbox99]

Hi,@Sasvlad, I'll try your suggestion tonight and then feedback.

Another question:
The reset button does not work now. In this case, will the "Short circuit contacts" be effective? I'm not sure if these two methods are the same principle.
Thanks!
And sorry for my poor English, Google helped me too...

[Sasvlad]

Hi,@Sasvlad, I'll try your suggestion tonight and then feedback.

Another question:
The reset button does not work now. In this case, will the "Short circuit contacts" be effective?
Thanks!
And sorry for my poor English, Google helped me too...

Yes.

[kbox99]

Yes.

Hi, Sasvlad ,I tried step 6 , insert and remove USB A to A cable for about 12 times, everytime the burning tool shows "Connect success" "Erasing bootloader" for 3 seconds, then the device disconnected, and the log shows :
[19:01:09 552][HUB5-1][Inf]--Start burning...
[19:01:09 615][HUB5-1][Inf]--------------ERASE BOOTLOADER------------
[19:01:09 724][HUB5-1][Inf]--start SendIdentifyCmd
[19:01:13 561][HUB5-1][Err]--IOCTL_IDENTIFY_HOST_Handler ret=-5 error_msg=libusb0-dll:err [control_msg] sending control message failed, win error: 连到系统上的设备没有发挥作用。

So maybe this way cannot work...
I took the box apart, but I don?t know where to "Short circuit contacts"
Please take a look at whether you can guide me where to short ... Thanks

[Sasvlad]

@kbox99,
If the computer sees your device, you do not need to"Short circuit" Method.

The computer shows an libusb0.dll Error.
Try uninstalling USB_Burning_Tool and install the latest version.
.

[kbox99]

@kbox99,
If the computer sees your device, you do not need to"Short circuit" Method.

The computer shows an libusb0.dll Error.
Try uninstalling USB_Burning_Tool and install the latest version.
.

currently usging 2.1.7.0 , I'll change to 2.1.6.8 and see

[Guest]

... Try uninstalling USB_Burning_Tool and install the latest version..
.

Latest Amlogic Burning Tool v 2.1.7.1 available for download here.

[kbox99]

@kbox99,
If the computer sees your device, you do not need to"Short circuit" Method.

The computer shows an libusb0.dll Error.
Try uninstalling USB_Burning_Tool and install the latest version.
.

Hi Sasvlad ,It's my fault...
I installed 2.6.1.8 on my PC, and burned successfully ..
It seems that my laptop is not supported well.

Thank you very much for your help！

[Appdata]

Would love this on my H96Max X2 4/32, I have it running on my T95Q. works great.

[imzsha]

Sasvlad I installed this on t95q all working fine except the screen goes dim after I open telgram app .. how do I fix it??

[dados]

Sasvlad I asked once before, but don't get any answer. Will this Rom work on my gt1-mini-a? If yes, will it keep Widevine L1 untouched?

[Sasvlad]

Sasvlad I asked once before, but don't get any answer. Will this Rom work on my gt1-mini-a? If yes, will it keep Widevine L1 untouched?

And what should I answer you? Send me gt1-mini-a and I will try... Then I can answer.
Or try it yourself....

[Sasvlad]

To users of T95Q and X96Max:

See the first post in the topic.

[kekz]

Sasvlad is there actually a solution for the twrp what I once addressed?


No matter what I do, the internal partition is not mounted in Twrp and you can not describe it

[konst55]

Thank you for evaluating my work!
Tray this.

Sasvlad, I installed this TWRP 3.2.3, but nothing has changed. For me, working TWRP is of great importance ! Now it's a fly in the ointment !

[konst55]

I install 95X firmware on S95 TV Box 2/16Gb
If you do not read TWRP, then everything is fine:
Eth - Ok
BT - Ok
WiFi 2,4, 5Ghz - Ok
IR remote without any patch
I have not checked the rest yet.
I have a desire to run from an external carrier Armbian. On F/W from Magendanz is working. Perhaps this can be done through terminal: reboot update...
Only need to defeat the problems TWRP.
And F/W from Sasvlad is really wonderful, even cheered me up!