UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

[Finless]

Have you tried a different HDMI cable?
Maybe a TV setting?

Bob

[stefhf]

HUGE CX-919 PROBLEMS - no hdmi signal or stuck in boot loop

I have huge problems with my two CX-919 sticks since I don’t have any HDMI signal anymore on both of them.
One i had flashed with finless 1.6b rom which worked fine at the time..after that I didn’t touch it for a while but now that I power it up again after a few weeks it doesn’t give me any HDMI signal anymore.
I also got a second CX-919 with stock firmware which I never tested up till now and it behaves exactly the same..no HDMi signal.

Flashing works fine without any errors.
I have tried flashing this second one with several CX-919 ROMs from geekbuying and vondroid using RKBatchTool v1.7 :
cx-919-rk3188-T-4.2-6210-20130926
cx919-rk3188-4.2-6210-20131209
[VonDroid.com]-cx919-4.2-6210_2013-06-12
of which none worked..only the last one ([VonDroid.com]-cx919-4.2-6210_2013-06-12) gave me a bit of a signal as it entered a boot loop in which it kept showing me the penguins.
Reflashing finless 1.6b now gives me a bootloop showing me a www.rikomagic.com logo in between.


Could someone please help me as I am at the end of my wits.
Why can this happen all of a sudden and what is the proper way to fix this and how can I avoid this from happening again? Could someone point me to the latest OFFICIAL stock CX-919 firmware? I’m at the point that I don’t want anything fancy anymore..I just want something that will work.
Thank you!

[blinkone]

Is there anywhere here I can get step by step instructions on how to flash this ROM?

The full instructions are in the read me file in the download.

[krowmagnan]

instructions

Is there anywhere here I can get step by step instructions on how to flash this ROM?

[lepaul26]

Hi

Is there any support for the CX 919 II ?

[adi.gigo]

No issues on my CX919 with the new 1.6 so thank you very much Bob.

My only comment is that my LED remained on throughout the flashing process (when holding the button down and connecting) although it says it should go off in the reader (same since 1.4). It got me stuck for a little while since I usually follow instructions pretty literally.

Like I said everything worked out well for me so some sticks might just have it so the light stays on.

Thanks again :-)

Sent from my Nexus 7 using Tapatalk

Does the screen flicker for you? Because when i flashed my rom the screen started flickering and I HAD TO FLASH A RESCUE ROM TO STOP IT. BUT THAT rom is clocked at 1.4 Ghz

[petersen77]

I am not sure. But I think the worst thing could happen is that you have to flash another ROM if it's limited to only 1.2 GHz

gesendet von meinem Samsung Knochen

[adi.gigo]

I've flashed this ROM. It says 1.6 GHz, on others only 1.2 or 1.4. Seems to be 3188T and is working fine.

gesendet von meinem Samsung Knochen

Are you sure its an RK3188T? I dont want to mess up my device so I wanna be 110% sure Cheers mate

[petersen77]

AW: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

I bought a CX 919 but in the email it says its clocked at 1.6 Ghz but has a 3188t chip. Can i flash finless on it?

I've flashed this ROM. It says 1.6 GHz, on others only 1.2 or 1.4. Seems to be 3188T and is working fine.

gesendet von meinem Samsung Knochen

[okey]

install null keyboard app from play store, then set it as default keyboard. This will also disable the onscreen keyboard

Cheers dude, thanks

[adi.gigo]

Does this work with rk 3188t chips?

I bought a CX 919 but in the email it says its clocked at 1.6 Ghz but has a 3188t chip. Can i flash finless on it?

[Gets]

Anyone got the same problem, will be a happy bunny if i can get the enter button working????

install null keyboard app from play store, then set it as default keyboard. This will also disable the onscreen keyboard

[okey]

Hi

I have this running on my mk809III, it works fine, but i cannot get the enter button to work on my airmouse/keyboard, i have tryed 2 different ones and it is the same.

No other rom will work on my stick other than this one

Is there anything i could do to get the enter button working.

Anyone got the same problem, will be a happy bunny if i can get the enter button working????

[corno77]

Hi, I'm new here.

I have just installed this ROM, but now the PC (with windows xp SP3) is not able to recognize it anymore, using the drivers present in the ROM zip file....

What can I do?

[FadeFx]

AW: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

Good news is the screen is not flashing anymore. Just penguins

Can youpost a foto of your stick? I have a feeling that you have either confused models or bought a fake device...

_________________________
tapatalked from GalaxyS3