Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

CloudnetGo CR11S

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Pressing 5 seconds the reset is right, but only one step.
    I'll try to put you through the reflashing process.
    -Download the firmware from cloudnetgo, either for the 5m or the 2m camera version
    -you need then the rkbatchtool 1.7
    -Connect your tv-box over USB and install drivers. I assume cloudnetgo has a tutorial file for driver installation.
    -Once the drivers are installed, start the batchtool.
    - then press the reset whole about 5 seconds, until you see the green light on the 1
    -select the stock ROM in the rktool and
    -finally less restore button and wait until the tool reports all done
    -after that your cr11s will rebout, when all went good.

    So far, the basic. Ask for details, when you need.

    JDfense --->I8160

    Comment


      #62
      Many thanks JDfense

      I'm trying to download the
      firmware from cloudnetgo for 5m camera version but it's very difficult download their downloading site the download stops when it reached 49%.

      any other suggestion?? Do you recommend flashing any other custom ROM Like

      http://www.freaktab.com/showthread.php?11706-(NEW-JUST-RELEASED)-Ultra-HiDef-Plus4-2MP-5MP-1080P-Multi-Media-Super-ROM-AP6210-Wicked-Video-Resolution-Quality-(See-Photos)

      Comment


        #63
        Originally posted by GoldDust View Post
        Many thanks JDfense

        I'm trying to download the
        firmware from cloudnetgo for 5m camera version but it's very difficult download their downloading site the download stops when it reached 49%.

        any other suggestion?? Do you recommend flashing any other custom ROM Like

        http://www.freaktab.com/showthread.php?11706-(NEW-JUST-RELEASED)-Ultra-HiDef-Plus4-2MP-5MP-1080P-Multi-Media-Super-ROM-AP6210-Wicked-Video-Resolution-Quality-(See-Photos)
        Yes, I'm highly recommend the Ultra-hidef over stock rom.

        Comment


          #64
          You can use the ROM, but for the first steps with a bricked device I would start with stock ROM.
          Search for cr11s firmware and you find maybe another link.

          JDfense --->I8160

          Comment


            #65
            Thanks for your help.
            Followed your steps and it Works great with the new custom RAM .

            Really appreciated

            Sent from my GT-I9500 using Tapatalk

            Comment


              #66
              Fine. :-)
              Enjoy your device.

              JDfense --->I8160

              Comment

              Working...
              X