NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

[doct14]

JUSTOP K10A

Thanks for all your effort .
will the 1080p or the 720p rom work with my JUSTOP K10A

i have this one running at the moment and its working perfectly :

http://www.freaktab.com/showthread.php?7489-NEOMODE-HYBRID-ROM-1-7-MK802IV-UG007B-CX-919-MK809III-and-others-with-AP6210

thank you rof your help .

[danielsun]

In my case, I tried to re-run, but it does not work. Several times. To recover it, I have to install an official version.

I have mk809III and I have same problem, error when flashing...now i can't flash any mod rom...i can flash only original rom with Rockchip batch tool 1.7
before i was using it with ROM NEOMODE HYBRID 1.7 and everything work well including wifi nd bluethoot (I have last chip wifi AP6010)

[pol280]

Messed up

I have exactly the same problem...
It seems that ROM is corrupted:
1) No Root - ??
2) RKLoader v1.2 - why not 1.24?
3) package-file - kernel is hashed,
4) parameter - Machine is 3066, not 3188,

I don't know if all above make any sense, but..

I have managed to run it by:
1) Flashing NeoMode v1.0,
2) Reflashing just system.img from v1.8

[danielsun]

I have exactly the same problem...
It seems that ROM is corrupted:
1) No Root - ??
2) RKLoader v1.2 - why not 1.24?
3) package-file - kernel is hashed,
4) parameter - Machine is 3066, not 3188,

I don't know if all above make any sense, but..

I have managed to run it by:
1) Flashing NeoMode v1.0,
2) Reflashing just system.img from v1.8

but why now i can't flash any mod rom????

[leestockers]

Great ROM, very good video play back but, Google chrome keeps closing after a split second from me opening it, no error message just closes. Anyone else have this issue or know how to fix it?

[mechaone]

Re: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

I have one question. It happens just in every 1080 rom, that sometimes i lose hdmi signal (black screen) for 3 seconds and than it comes back. Is it charger related?

Definitely a power supply issue. The factory units have all crapped out on me. My stick no longer gives black outs, random reboots or system freezes since switching to quality usb power supplies. Buy one. Its worth the money

Sent from my XT925 using Tapatalk

[mechaone]

Out of curiousity, could the inclusion of a reference to the MK809II in the parameter file be what is gooning the 809III series following flash attempts, or is that moot?

Sent from my XT925 using Tapatalk

[raplus]

Definitely a power supply issue. The factory units have all crapped out on me. My stick no longer gives black outs, random reboots or system freezes since switching to quality usb power supplies. Buy one. Its worth the money

Sent from my XT925 using Tapatalk

Thanks for your kind reply. It's strange that this happens only when resolution is set to 1920x1080...i tried to powered it also from TV unit but it's the same. Try over the USB power supply. Should it ne more than 2A?

[ADerrik]

In my case, I tried to re-run, but it does not work. Several times. To recover it, I have to install an official version.

An update.

I tried to connect the MK809III but it got stuck to the start jpg so I decided to re-install the original firmaware.

Same story. It got stuck to the Google TV image.

Then I decided to run again the Neomode firmware and it run perfectly, without error.

The MK809III works perfectly except for the Bluetooth which cannot be turned on.

[neomode]

OK let me bring in some Light here.

First I use the Loader 1.2 because it Works i have Tested it on different Devices.
Second the Parameter File says 3066 that is normal because the parameter are the same.
I have Test my Rom with a MK809III Hardware Rev.2.
Today I have got a Hardware Rev.3. And will Test it Asap.
The most issues are coming from the Power Supply please make sure that it Work right.

Neomode

[neomode]

An update.

I tried to connect the MK809III but it got stuck to the start jpg so I decided to re-install the original firmaware.

Same story. It got stuck to the Google TV image.

Then I decided to run again the Neomode firmware and it run perfectly, without error.

The MK809III works perfectly except for the Bluetooth which cannot be turned on.

Please tell me when you have buy your Device.

Neomode

[mechaone]

Re: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

Thanks for your kind reply. It's strange that this happens only when resolution is set to 1920x1080...i tried to powered it also from TV unit but it's the same. Try over the USB power supply. Should it ne more than 2A?

Don't rely on TV usb. Most run 500mA max. The units will certainly draw more amps when in full 1080 res, as there are that many more pixels to render at every frame.
Anything more than 2.1 A is unnecessary, as a powered USB hub is the next step if you have numerous USB devices.

Sent from my XT925 using Tapatalk

[darekmarta1975]

I did it, but it did not work. And it is not the first time. I can not install any NEOMODE-version. I have Mk802IV(new version). And always the same. When the program want to check the installed version, I get the error.

The problem of these errors is a version of the loader

[danielsun]

The problem of these errors is a version of the loader

So if I change only loader I can flash and ROM work?

[darekmarta1975]

So if I change only loader I can flash and ROM work?

yes, you have to change the loader probably like what you were sure was 2.03.
Run and see how you lader. How do you upload another loader unit can not get up