Kit Kat 4.4.2 RK3066 (Fully Working)

[sam tyler]

Me too, but i think nobody is reading this topic anymore. I need the Flashable OC Kernel.

sorry for not replying, for problems with stock kernel check one of my posts a page or so back basically you may have under clock it.and I don't have the overclocked kernel. I also have the mk809ii and once I under clocked the ROM it stopped rebooting and getting hot.hope this helps.

[digger]

Me too, but i think nobody is reading this topic anymore. I need the Flashable OC Kernel.

I hope this one you're looking for

https://mega.co.nz/#!E9xiySpI!oU2s7hs1JEfHmBsfuCb2mTwi3GSaVBdvFlzd55-02mI

[himmon]

Brilliant, thanks for the kernel digger, hopefully that's the one. I know Shomari posted two OC tweaked kernel links, one unfortunately boot loops on my mk809ii.

Thanks to rest of you guys too, cheers!

[himmon]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

sorry for not replying, for problems with stock kernel check one of my posts a page or so back basically you may have under clock it.and I don't have the overclocked kernel. I also have the mk809ii and once I under clocked the ROM it stopped rebooting and getting hot.hope this helps.

Weird really as the stock kernel is already underclocked at 1.4Ghz My mk809ii runs at 1.6Ghz.

Hopefully the kernel digger kindly provided will help you out too. Good luck

[eric_zapata]

other method to root this rom?

Cannot root this rom with Kingoroot, another method?
MX2
windows 8.1
Installed all Rockchip drivers, no luck.

Thank you guys.

[himmon]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Cannot root this rom with Kingoroot, another method?
MX2
windows 8.1
Installed all Rockchip drivers, no luck.

Thank you guys.

Kingo root does work, just select re-root when it shows up, make sure you also have USB connect to pc enabled and USB debugging. All should be fine.

[joaoluizt]

I hope this one you're looking for
https://mega.co.nz/#!E9xiySpI!oU2s7h...BdvFlzd55-02mI

Thank very much Digger. Now i can beggin my overclock project. Thanks again.

[iramohs]

CWM flashable kernel zips

Devices all have different OC tolerances,so here's some flashable OC kernels for users requesting them. If you prefer to flash with rk batch tool simply extract the kernels. Otherwise flash zip via CWM.

Good luck!

[1608][400][533] zip http://ge.tt/4W8vYu62

---

[1512][400][600] zip http://ge.tt/1OsXXu62

---

[1608][400][600] zip http://ge.tt/9OCMWu62

[himmon]

Cheers mate, thanks a lot

[joaoluizt]

Cheers mate, thanks a lot

Thanks a lot, now i just need a good 5v/3.5a power adapter. The heatsink is already done. The wifi wire pulled off from the case.
I'm using a adapter from a Iphone but the OC from Kernel only works only until 1.416 (stable) because its just 5.1v/2.1A.

[Kozon]

It works perfectly, replace *** by www

Hello toperez!




The password is not good, as I wrote earlier posts. can you help?
*** = www

***.hindotech.com

[himmon]

Hello toperez!




The password is not good, as I wrote earlier posts. can you help?
*** = www

***.hindotech.com

The password for Hindotech's dropbox works 100% although at this moment is pointless as the link to the rom is identical to the Rom on post #1 provided by Shomari

This has been mentioned many times within this post.

Password is the following in lowercase: w w w . h i n d o t e c h . c o m
Obviously minus the spaces within the password. Easier to just type the password rather than copy/paste if you're still having problems.

[jali]

BT problems

I bought an mk808b with already install 4.4.2. Everything work wifi is excellent.But i have a problem with the bluetooth. Although it works and it search the other bluetooth devices (like keyboard) and also connected the connected keyboard or mouse don't react with the tv box. Do you have any idea;

[cooleye]

I try this rom with MK819. WiFi works perfect but analog tv-out and lan are not working.

[chsmith1976]

Peripheral Issues

OK, so I figured out/found workarounds for most of the issues I had with this ROM, but one REALLY annoying one remains.

The stick crashes from time to time (usually when left on overnight) - which is something I could live with, but the big problem is that I have to unplug EVERYTHING attached to it and wait until I get to the Android home screen before I can plug in peripherals (USB mouse & ethernet adapter). If I just pull power and put it back in with the other USB peripherals plugged in, the ROM gets stuck on the dancing circles boot screen and never makes it to the android home screen.

I've tried using other power adapters from the HP Tocuhpad (2.1A), the OnePlus One (2A) and even bought a 3A adapter, but all have the same problem. Also, I don't think heat is the issue as I can't get to the android home screen if everything is plugged in from a device that has been unplugged for an hour, so I don't see how the cpu could overheat just booting from a cold start - and the box doesn't really freeze, it just get stuck on the boot screen.

Would love to be able to fix this issue as it's a real PITA to have to get behind my receivers to unplug all the cables, wait for android desktop and plug everything back in a couple of times a day.

Edit: This is with stock kernel with NO overclocking whatsoever.