If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
You have to have the autostart.sh file in the directory before you execute the command. It will work as I had the same problem a while ago and it solved it.
You have to have the autostart.sh file in the directory before you execute the command. It will work as I had the same problem a while ago and it solved it.
I am really new at ssh, if you could get a step by step instruction, I would greatly appreciate it.
You have to have the autostart.sh file in the directory before you execute the command. It will work as I had the same problem a while ago and it solved it.
Tvs with CEC usually have an interface to toggle these settings. I have an LG and you can access the settings by pressing the SimplLink button on the remote
I have an older TV that does not have CEC. I am also using a new Denon reciever, but I talked to the tech support from Denon, and he said the Device ( my S89H) is the one that has the CEC function.
Need disable CEC
via ssh
echo "echo 0 > /sys/class/amhdmitx/amhdmitx0/cec_config" > ~/.config/autostart.sh
chmod +x ~/.config/autostart.sh
After restart box CEC will be disabled.
Thanks for your help, I tried that, but it did not work..
I copied this into putty as per your instructions, is this correct?
Because the thermal throttling ignores the min_freq... means, if the SoC reaches a temperature where the kernel have to throttle under the min_freq the kernel will do so...
I have one little problem, my S89H with OpenELEC, turns off when I turn off the TV. Normally that would be a nice feature, however since I am using it as PVR with recording feature, it is not a good thing for me.
My question, is there a setting to keep box alive?
Tvs with CEC usually have an interface to toggle these settings. I have an LG and you can access the settings by pressing the SimplLink button on the remote
Need disable CEC
via ssh
echo "echo 0 > /sys/class/amhdmitx/amhdmitx0/cec_config" > ~/.config/autostart.sh
chmod +x ~/.config/autostart.sh
After restart box CEC will be disabled.
I have one little problem, my S89H with OpenELEC, turns off when I turn off the TV. Normally that would be a nice feature, however since I am using it as PVR with recording feature, it is not a good thing for me.
My question, is there a setting to keep box alive?
ok the wierd part now is that even thos i did set 1608000 min_freq after a while it set down the cpu to 1200000.
Anyone knows why? Kerber?
Because the thermal throttling ignores the min_freq... means, if the SoC reaches a temperature where the kernel have to throttle under the min_freq the kernel will do so...
After months of trying to find a solution to stream live TV and with a guide at a reasonable cost, I have finally succeed. After trying several different Android TV boxes, I finally found that the newer quad core Amlogic plays all my over the air broadcast channels flawlessly.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Leave a comment: