OpenELEC for s82, M8, MXIII, Tronsmart S89

[roolmapool]

Good news!
Just wait than Kerber release 5.03 to ours S82/S89 devices

5.03 released for our device ! http://amlinux.ru/image/5.0.3/
Big thx to Kerber

[MikeD]

Is your box online? Maybe it can't connect to a ntp server.

[Aceraaa]

http://www.FreakTab.com/showthread.php?p=271160

I tried this and the only thing that changed is that the date is now Jan 2, 1997 and time still remains
the same and off by 5 hours. Rebooted several times, no change.

Regards .

Aceraaa

[roolmapool]

It seems that in openelec 5.0.3 pr2 23.976 stuttering is finally fixed!

http://www.freaktab.com/showthread.p...l=1#post282905

Good news!
Just wait than Kerber release 5.03 to ours S82/S89 devices

[dankec]

It seems that in openelec 5.0.3 pr2 23.976 stuttering is finally fixed!

http://www.freaktab.com/showthread.php?23009-ROM-Unofficial-OpenELEC-5-0-3-for-MK808B-Plus-and-Beelink-MXQ&p=282905&viewfull=1#post282905

[MikeD]

http://www.FreakTab.com/showthread.php?p=271160

[Aceraaa]

New this site!

Hi everyone,

Like this site a lot. I need a little help here, I have OpenELEC Ver :4.97.2 and my time is stuck on
Jan 1, 1970. I can't seem to find were you can set the date and time.
Could someone direct me to the location to set date and time.

Other than that all is working extremely well.

Thanks in advance

Aceraaa

[Slappy]

kinda noobie on the linux side, so

how am i supposed to flash another version of openelec over the old one (or another version of linux)?

To update, you access the share thru your PC and copy the TAR file the to update folder. Reboot the device and it's done

[AndreaSpooky]

kinda noobie on the linux side, so

how am i supposed to flash another version of openelec over the old one (or another version of linux)?

[Edith G]

nice thread, This what I was looking for

[clarkss12]

Done all of that. I end up with a list of muxes that won't scan.

When I first set up my tvheadend, I had the same problem of the muxes not scanning. There is a setting to enable the tuners, also a setting for idle scan and a setting for initial scan. Just follow the video closely, you will get it. If you look at the comments under that video, you will see some of the dumb questions I asked. I probably installed and uninstalled OpenELEC a dozen times, because I THOUGHT I was messing it up by changing different values in tvheadend. After a long time of trial and errors, I found out how to get tvheadend to work, and did not have to keep uninstalling and reinstalling OpenELEC.

So, You will get it, it is just a setting that you are missing.

[d3ft]

What steps did you take?
Under TV adapters, you will see your HDHomeRun and two tuners, you click them and then enable each tuner and select ATSC . Also create a network, and select a predefined MUX.

https://www.youtube.com/watch?v=VtnwqZNT4p8

Done all of that. I end up with a list of muxes that won't scan.

[clarkss12]

I updated the firmware on my HDHR and have gotten TVheadend to see it through the web interface (connected via ethernet to the S89). Unfortunately, all the setup guides appear to be for an older version of Tvheadend as mine looks completely different. I've tried to get it to scan channels but it just sits there saying "PENDING".

What steps did you take?
Under TV adapters, you will see your HDHomeRun and two tuners, you click them and then enable each tuner and select ATSC . Also create a network, and select a predefined MUX.

https://www.youtube.com/watch?v=VtnwqZNT4p8

[noosk]

OpenELEC for s82, M8, MXIII, Tronsmart S89

I updated the firmware on my HDHR and have gotten TVheadend to see it through the web interface (connected via ethernet to the S89). Unfortunately, all the setup guides appear to be for an older version of Tvheadend as mine looks completely different. I've tried to get it to scan channels but it just sits there saying "PENDING".

I am in exactly the same situation. Using a mygica t119 tuner

[d3ft]

That could be the reason, not really sure. But if you verify that it will see your tuner by WiFi, then you can go from there.

I updated the firmware on my HDHR and have gotten TVheadend to see it through the web interface (connected via ethernet to the S89). Unfortunately, all the setup guides appear to be for an older version of Tvheadend as mine looks completely different. I've tried to get it to scan channels but it just sits there saying "PENDING".