Cube T9 ROM/Tools/Mods, etc

[devilz-wolit]

Devil is the xnetfox ROM yours?
i am wondering if the auto brightness stuck is fixed?

yes. in the 3.8 version is ok but in the 3.9 version i decided to use Lux auto brightness which also has the automatic night-vision function.
http://xnetfox.altervista.org/custom...x-extreme-3-5/

Edit: Lux is bad choice for t9 with random freeze video. The number of video freeze increases significantly. I will continue to use Velis.

[dannypipo]

HI Dannypipo,
Have you any a link about sreen replacement for Cube T9, when I try to remove mate foil my screen no longer works ;-(
Thanks & kind regards.

see my guide I did by myself after seeing similar job on you tube http://freaktab.com/forum/mtk-based-...733#post567733

[danzzes]

Buf... I read so much... that I need a third to confirm what I think its correct to do...

I have a T9, at the moment with stock rom and stock partition.... and I want to install XnetFox rom to try it and of course use a new partition.... So, from what I had read.. I need to do this with the following steps.

1.- Re-install the stock firmware with the new scatter for 1,5Gb and 8 GB
2.- Root
3.- Install TWRP
4.- Backup the nvram
5.- Install Xnetfox latest firmware 4.4 B108
6.- Enjoy!!!...

about the procedure I think I have it clear, at least more or less.... if I have any doubt or anything I will ask for help!!:.. but I need to confirm if the order of steps are correct.

Thanks!!!

[devilz-wolit]

Buf... I read so much... that I need a third to confirm what I think its correct to do...

I have a T9, at the moment with stock rom and stock partition.... and I want to install XnetFox rom to try it and of course use a new partition.... So, from what I had read.. I need to do this with the following steps.

1.- Re-install the stock firmware with the new scatter for 1,5Gb and 8 GB
2.- Root
3.- Install TWRP
4.- Backup the nvram
5.- Install Xnetfox latest firmware 4.4 B108
6.- Enjoy!!!...

about the procedure I think I have it clear, at least more or less.... if I have any doubt or anything I will ask for help!!:.. but I need to confirm if the order of steps are correct.

Thanks!!!

Yes. Is correct.

1.- Re-install the stock firmware with the new scatter for 1,5Gb and 8 GB
2.- Install TWRP (use same scatter for 1,5Gb and 8GB)
3.- Root
4.- Backup the nvram
5.- Install Xnetfox latest firmware 4.4 B108

[danzzes]

Im trying to re-install the stock firmaware again with the scatter for 1,5Gb and 8 gb but Im getting this error show in the image...


I have tried different cables and diferent ports.. but no luck.. Im using a laptop with Windows 10

[devilz-wolit]

SPFT version or preloaded drivers not corrected installed

[danzzes]

The SPFT it the one linked here in this thread, 5.142
The drivers are 3.0.1504.0 from Mediatek inc... Im trying to install that are here now...

[devilz-wolit]

Use new version. Search here.

http://xnetfox.altervista.org/cube-t9-info-root/

[danzzes]

Use new version. Search here.

http://xnetfox.altervista.org/cube-t9-info-root/

Worked as a charm!!!... First step done!!!.....
Thanks!!!
All steps done!!!... Already enjoying Xnetfox rom!!!..
Thanks again

[moospe]

So my Cube T9 Won't charge anymore.
I forgot to turn it off and the battery got completely drained.
Now when i connect it to a charger it won't give the charging animation.
and when connected to the pc you hear a constant loop of "Device connected/Disconnected"

I've tried holding the power button for 20min.
both when connected to a charger and not connected.

I've tried holding power + vol up for 30 sec.

all have been no succes.
Do you guys have any idea on how to get it working again?

[giouncino]

if you charge the tablet with a power bank it will work again (tried personally)

[moospe]

if you charge the tablet with a power bank it will work again (tried personally)

You sir, Are my hero.
It worked !
Thanks!

[giouncino]

you're welcome!

[LucaF]

Hi all, I have a great problem with Cube T9 32gb
I have tried a repartition with SPFT and had an error (first pic).
After that my tablet dont boot, i've tried hold on power for 30 sec, tried boot in recovery, tried recharge also with powerbank... but nothing!
Now when i connect to pc it look start a loop conneceted/disconnected like second pic.
Also tried desoldering battery but nothing
Of course if I open now SPFT it dont show chip info, i think because cant connect to tablet
Anyone can help me please?
Thanks in advanced

[giouncino]

You performed the wrong action: you should set in "download only" NOT in "firmware upgrade"....
Now I don't know how to help you, I'm sorry