Cube T9 ROM/Tools/Mods, etc

[Casaboy91]

HI devilz-wolit,
I flash T9 already rooted with Kinroot, but after using SP Flashtools the T9 no longer reboot, I've tryed to flash withfile T9_V1.08_20150326 NoChinaApp.
How can I solve pb please.
Thanks

[Casaboy91]

no longer power on, a brick ;-) previous rom 1.08

[Casaboy91]

first Flash after root ;-(

[hocuspocus69]

Be quiet it's very very difficult to brick MTK 8752 tablet...try to spflash original stock rom...before it be sure that your tablet is poweroff! if you connect it to charge you must see battery image on your display if not that mean your tablet is not poweroff press power button for 10 seconds then spflash it...

[devilz-wolit]

HI devilz-wolit,
I flash T9 already rooted with Kinroot, but after using SP Flashtools the T9 no longer reboot, I've tryed to flash withfile T9_V1.08_20150326 NoChinaApp.
How can I solve pb please.
Thanks

Two questions:
Why did you use KingRoot?
What is the logic to flash a stock rom on a device rooted with kingroot? : after what the root is deleted.
But as kingroot change system files without touching the stock recovery, if something goes wrong you can arise serious problems.

Be sure to completely turn off the tablet and repeat the flash (for security uses stockrom 1.07.
At the end of the operation must be the symbol of successful green V

[Casaboy91]

Thanks Team for your responses and explanation,
To be clear, I should tried to reflash with SP FLASH Tools and in Scatter I should put original 1.07 scatter ????
(Sorry I'm not very good in English ;-(
I'm in France and going to try tonight ;-)

[Casaboy91]

Could you please confirm process :
1) Open SPflash tools
2) Enter Scatter file location (Scatter from 1.07 in first page V1.07 - 2015-03-04 description >>> ) should I rename it ?
Then run with click to dowload or delete and dowload ?

[devilz-wolit]

Could you please confirm process :
1) Open SPflash tools
2) Enter Scatter file location (Scatter from 1.07 in first page V1.07 - 2015-03-04 description >>> ) should I rename it ?
Then run with click to dowload or delete and dowload ?

Using SP Flash Tool
Extract the downloaded file and run "flash_tool.exe".
If you use win7 8.x or 10 run it as administrator (right click - Run as Admin)
Click on the button Scatter-loading and point to the folder of Rom to install.
Select the file "MT6752_Android_scatter.txt"
Make sure that the mode of download is selected as the "Download Only"
Click on Download KEYS (green arrow)
Now connect the tablet (OFF) to your PC and wait to be recognized and that the process starts and arrives at the conclusion (you not perceive by the advancement of the bottom bar in the program) A big green check mark will appear on the screen to indicate the success of the operation.

Now unplug the tablet and turn it on recovery mode
- do a wipe cache and factory reset
- reboot


Recovery mode
Tablet off
press the keys Vol + and Power until the black screen appears with 4 choice (written in very small)
[Recovery Mode]
[Fastboot Mode]
[Normal Boot]
[UART Boot]
- To move use the Vol + button to select Recovery Mode
- To confirm use key Vol-
When you see the green Robotino press the Power
At this point you are in Recovery Stock real.
Use the button Vol- to move and vol+ button to confirm

[Casaboy91]

Now I have message :
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032°
[EMI] Enable Dram Failed
[HINT]:
Please check your Load matches to your target which is to be dowloaded.

[Casaboy91]

all boxes are checked and message error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)

[Casaboy91]

Red progress to 100% dowload DA the message error notify before
thx for your help ;-(

[devilz-wolit]

all boxes are checked and message error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)

Use the correct version of spft.

https://drive.google.com/file/d/0B0Lfglunx7nsVFctX3VpV3VrUFE/view?usp=sharing

[Casaboy91]

Thx I'll try it because mine is SP_Flash_Tool_exe_Windows_v5.1452.00.000

[Casaboy91]

Sorry but same error ;-(

[devilz-wolit]

Sorry but same error ;-(

Try a different computer.
Which operating system do you use? 32 or 64 bit?