NEW - 900 Supersport 1.1 Jelly Bean rooted ROM for Cube U30GT Mini

[a29psx]

I followed your instructions to the letter. I have three of these tablets that I need to root. Initially I had some issues with the drivers and booting into the flash mode but sorted that out. Got the first tablet in flash mode, erased the NAND, all is good, then on write flash it wrote the entire 535539K then when it went to check the data it failed at 52K. I was unable to do anything so I unplugged it and turned it on. It went to Clockwork and did everything as expected and worked perfectly. It didn't go as planned but it worked correctly and that's all that matters.

Tablet #2- After the first one acted weird I was hesitant but began the same procedure for number 2. The NAND erase went fine. The flash got screwed up while writing not even 20% into it. What can I do? It won't even turn on now. I need to fix this. The only good news is that the device is still showing up as Found in your program.

UPDATE: So after it going all half brick on me it actually allowed me to erase NAND and flash again. It wrote the whole thing again and then failed at exactly 52K on the check again. I unplugged it turned it on and it was good to go.

I had no problems with the third one but again it failed the check at exactly 52K. Unplugged it and manually booted it with no problem.

use a better usb cable and plug into the USB port at the back of your computer
I had the same problem and over pass it by doing that

[900supersport]

Re: NEW - 900 Supersport 1.1 Jelly Bean rooted ROM for Cube U30GT Mini

Greatestpyro good to hear you got the tabs flashed in the end. As a matter of interest what version of windows do you use?

[Magnifico]

Can you play a game Asphalt 7 on this ROM? The game stops when loading and then restart and goes in loop with the restarting.

same here....well on my non mini

[greatestpyro]

Follow up

I am on Windows 7 64bit and the cable was plugged into the backplate of my PC. Also the cable is 100% good. I flashed my Acer Iconia a510 and then loaded 90GB on it with the same cable, no problems. And just a little advice if people are having issues, here are a few tips I could have used before I started.

1) Once you load the drivers you may need to disconnect the USB cable and reconnect it before windows detects the tab correctly.

2) If you hit the power and the volume+ key at the same time with no cord plugged in it brings up an android icon with his chest open, I was under the false impression that this was the screen I needed to see in order to do the flash, this is incorrect. If the tab is plugged in and you hit the two keys it will stay on a black screen and the loader will indicate that the device is connected this is your queue to start, at least in my case.

3) As long as the data loads the check seems to be irrelevant.

[wish master]

I am on Windows 7 64bit and the cable was plugged into the backplate of my PC. Also the cable is 100% good. I flashed my Acer Iconia a510 and then loaded 90GB on it with the same cable, no problems. And just a little advice if people are having issues, here are a few tips I could have used before I started.

1) Once you load the drivers you may need to disconnect the USB cable and reconnect it before windows detects the tab correctly.

2) If you hit the power and the volume+ key at the same time with no cord plugged in it brings up an android icon with his chest open, I was under the false impression that this was the screen I needed to see in order to do the flash, this is incorrect. If the tab is plugged in and you hit the two keys it will stay on a black screen and the loader will indicate that the device is connected this is your queue to start, at least in my case.

3) As long as the data loads the check seems to be irrelevant.

mine is device not registered in win 7. saw yellow triangle at rk 30 device, any help?

[dbenn]

did anyone noticed battery bug in this ROM?

at 20%-30% suddenly there is a warning about low battery,

[thanhbatousai]

this rom was virtual battery. Battery was 20%, then Cube mini auto power off ???

[gaabe]

Flash was succesfull with my good old zte blade usb cable, nice, clean rom thats what i want, Thanks for the Chef!

[mham1404]

problem with flash mod in u30gt mini

Hello. Please solve my problem.
My tablet, is u30gt mini. When the tablet is on, I have no problem with the driver, and the driver can be installed easily. My problem is in flash mode. In this mode, when the tablet is connected to my computer, the computer does not recognize the tablet. ( also if the cable is connected to the tablet, the tablet is not going to flash mode, Should I remove the cable first, then the tablet went into flash mode, connect the cables do ).
Please Help

[900supersport]

Re: NEW - 900 Supersport 1.1 Jelly Bean rooted ROM for Cube U30GT Mini

Yes try putting the tablet into flash mode then connecting to the pc.

[mham1404]

I do it and I took tablets to flash mode
My problem is in flash mode. In this mode, when the tablet is connected to my computer, the computer does not recognize the tablet
see the picture. this is the flash mode.

[900supersport]

Re: NEW - 900 Supersport 1.1 Jelly Bean rooted ROM for Cube U30GT Mini

Can you not select the unknown device and update the drivers?

[mham1404]

I did it
A question:
If when**the tablet is on, the driver is installed correctly, meaning that it is installed in flash mode?

[900supersport]

Two different sets of drivers are used, one for flashing and one for when the tablet is switched on for ADB.

[mham1404]

Can you put a link download driver for flash Mode? (The driver is specific to the tablet u30gt mini).
thanksfoll