Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

[ROM] Superceleron 1.4B, MK808B Plus AP6210/6212 and Clone RT8723 and MXQ S85.

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    For Mk808b choose orAp6210/6212 or Rt8723. For Mxq S85 it is only one model, maybe only 6210/6212!
    Edit: I see you have Mk808b Plus, so try the other version!
    Last edited by vn800art; 22 February 2016, 23:00. Reason: Edit: add

    Comment


      what version did you downloaded?(filename)

      Comment


        MK808B_PLUS_SupeCeleron_1.4B_AP6210_AP6212.zip
        Maybe when i try to install, and pressing the Reset buton, first time, i pushed the pin, to the wrong hole, not the reset.
        Could i destruct something?
        Blue LED is not lighting.

        Comment


          you must have destroyed the led.... if you want to be sure what wifi chip you have and if you killed the led is open the stick, is super easy...

          Comment


            I opened it, but which is the wifi modul?

            Comment


              Originally posted by wmiki View Post
              I opened it, but which is the wifi modul?
              is under the device if i remember correctly!

              Comment


                It is the shiny silver one on this picture.
                Read whats written on it.

                There are somewhere drivers that can be flashed inside this topic. Had the same problem.
                You may only view thumbnails in this gallery. This gallery has 1 photos.

                Comment


                  Someone here can help me?
                  I wanted to give the openelec build by kszaq a try...
                  But I can't boot into recovery anymore ... Flashify detects twrp 2.8.7.0, but if I use any "boot into recovery " buttons, the device only restarts ...
                  Booting from SD won't work ether ... If I use the toothpick methode the superceleron picture appears and then nothing ...


                  Last edited by Stimmenhotel; 25 February 2016, 16:16.

                  Comment


                    that is new to me, if nothing works, put the device on bootloader mode and flash by usb burning tool!

                    Comment


                      If I choose "boot to bootloader" it will restart too... :/
                      I can flash boot.img and recovery.img with flashify. boot =/= bootloader, right?
                      But I could try to flash twrp again... then flashing the stock firmware.

                      Well. .. flashing the twrp included in 1.4b I receive heavy graphical glitches ... picture cut in half and multipled by three or four ... and if I move my mouse, the picture half changes to the other one
                      trying a older one right now
                      Last edited by Stimmenhotel; 25 February 2016, 17:16.

                      Comment


                        you need tho change the resolution in android to 720p to twrp work ok!
                        I added that in the 1º post!

                        Added back TWRP 2.8.7.0 recovery (If you have a scrambled screen on the TWRP go back to the system and change the resolution back to 720p and it should work just fine)

                        Comment


                          Hello! I am in the same boat! I believe I cannot see Twrp ( I have Mk808b+) in 1.4b! I am also trying to boot OE from Sdcard, btw, Your rom works flawlessly, rapid as hell ( no thrills CPU raised to max, hotplug, no check on boot), it's only a problem of dual boot to get OE!
                          Thanks for your interest!

                          Comment


                            well weird looks like im the only one that twrp works 100% ok... but im going to make a test... download and flash the 1.4B to see what it does on my device!(my device is on 1.4B... is only to see if the download is good and the zip)

                            Comment


                              Do you still have a copy of TWRP 2.8.7.0 by adbul?
                              Or are you using it in 1.4b too? I know this one worked before.

                              Comment


                                yes is my rom so i use it
                                Search the forum is here somewhere the twrp, im really busy now !

                                Comment

                                Working...
                                X