Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

R-Box PRO Amlogic S912 Octa Core - 3G + 16G

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Hello all. First post here, but do not buy an R-BOX Pro if you expect to use KODI for HDR10 and/or Dolby Vision. However, it may be a value if you don't have a older generation 4K TV that doesn't support these latest standards.

    Forget about Kodi 17rc/16.1 supporting HDR10 and Dolby Vision to a TV because of the Amlogic S912. In fact, avoid this chipset if you are serious about 4K streaming through KODI, as there is NO LibreELEC Kodi support (4K SUHD HDR10/ Dolby Vision Kodi dream build), which is required for the proper pass through.

    I made a big mistake buying this, and also had a bad customer service experience, but that's another story. If you bought it, to get the most of it, uninstall the buggy Kodi beta, and download SPMC 16.5x, as at least it sees you have a 4K TV, unlike Kodi 17 RC3.. Again, avoid Amlogic S912 boxes if you have a newer SUHD 4K TV that supports HDR10 and/or Dolby Vision. I spent good money to get an OLED set that had both, only to be limited by the R-BOX Pro.

    Oh, and did I mention the lack of manufacturer support? No official forum, horrible record of people searching for firmware all over the internet with little success. And the wireless update on the device hasn't found any firmware update since November 18, 2016. They certainly have a lot to do if they are going to release firmware that allows KODI content to pass not just as 4K, but HDR10 and Dolby Vision.

    Regards,
    Janx

    Comment


      typo correction

      Comment


        Hello guys,
        I have R-Box Pro 3/16gb, but unfortunately, 14 days ago, my tv don’t see hdmi with him connected. I tried with another hdmi cable, I tried with another tv ... nothing. About this, I tried to reset, but screen of tv goes black.
        I searched a way to reflash firmware, and I find GeekBuying blog and your site.
        I tried all firmware find in GeekBuying blog – 20161011, 20161022, 20161128 and 18092016_AndroidPC_es.zip find in this site, first with - Usb_Burning_Tool -, I received this 2 errors (photo: error_1, error_ 2 - after I populated license folder with zip provided for RISCy Dude / thank you), and then with - Burn_Card_Maker - I received this error (error_3) – I wait about 2 hours and nothing happened.

        If it`s possible, please tell me what to do? I don’t figure out. Thank you!
        P.S.: I tried all 3 recovery provide for Vlad64 - thank you -, but my box stuck on R-BOX Pro logo.
        You may only view thumbnails in this gallery. This gallery has 3 photos.

        Comment


          Hi there try uncheck Erase bootloader" and then try again

          Comment


            Maver:
            I have the same problem .. I downloaded another license code and when I reach 7 percent format its stock

            Comment


              Thank you guffe2005dk for your advice. I tried with Usb_Burn_Tool 2.0.8 (last) and no luck. I think is a uboot.ini trouble.

              Comment


                There are a lot of knowledgeable folks here who can perhaps guide you to restore your boot partition.
                I believe your boot partition has been compromised due to abrupt interruption during the flash update.
                This will restore the necessary system files that allows a successful flash update.

                Comment


                  Thank you resansid for your advice. Please, if you know, give me a hint. I don`t find nothing to help me with this.

                  Comment


                    Hi all ...noob here, interested if any one has been able to telnet to this box and if so is there a cmd (command) to turn off blue/red led light while watching movie?

                    Cheers

                    Comment


                      I was having issues with my box sluggish.
                      3g version.
                      So started on re flashing with usb burning tool v2.0.8, which you also need the licence folder to change after usb tool program installed.
                      If you do not, you most likely like i was getting the MAC 0 error.
                      Once licence folder changed after i searched like crazy for it, i was able to reflash the latest 18112016 firmware from geekbuying.
                      Firmware in box was dated 11112016 but now showing 18112016, so all good.
                      Bluetooth wifi etc all working
                      II will post up pics showing exactly which is the OTG port and i assume you will have the male to male usb cable in order to install firmware.
                      Best wishes
                      Last edited by Wingchundub; 07 April 2017, 13:16.

                      Comment


                        Originally posted by cattledog View Post
                        Hi all ...noob here, interested if any one has been able to telnet to this box and if so is there a cmd (command) to turn off blue/red led light while watching movie?

                        Cheers
                        Pull bottom bar up by dragging mouse from bottom of screen upwards, there you will see icons.
                        To the far left is a lightbulb icon, click it, to turn on or off

                        Comment


                          Originally posted by maver View Post
                          Hello guys,
                          I have R-Box Pro 3/16gb, but unfortunately, 14 days ago, my tv don’t see hdmi with him connected. I tried with another hdmi cable, I tried with another tv ... nothing. About this, I tried to reset, but screen of tv goes black.
                          I searched a way to reflash firmware, and I find GeekBuying blog and your site.
                          I tried all firmware find in GeekBuying blog – 20161011, 20161022, 20161128 and 18092016_AndroidPC_es.zip find in this site, first with - Usb_Burning_Tool -, I received this 2 errors (photo: error_1, error_ 2 - after I populated license folder with zip provided for RISCy Dude / thank you), and then with - Burn_Card_Maker - I received this error (error_3) – I wait about 2 hours and nothing happened.

                          If it`s possible, please tell me what to do? I don’t figure out. Thank you!
                          P.S.: I tried all 3 recovery provide for Vlad64 - thank you -, but my box stuck on R-BOX Pro logo.

                          The same problem
                          Attached Files
                          Last edited by noobynews; 23 April 2017, 11:02.

                          Comment



                            Last error which was displayed to me
                            You may only view thumbnails in this gallery. This gallery has 1 photos.

                            Comment


                              Originally posted by Vlad64 View Post

                              Hi, TWRP image (https://drive.google.com/open?id=0B7...WRWVmdtRno4SzQ) with fix mount sd-card&usb-stick.
                              Hi Vlad,
                              Do you follow the CSA93 which is equivalent to our R-Box PRO 3g/16GB q6330 version at the other forum and do you see if this box is now supported by OTA updates.
                              I am disappointed by R-Box PRO team where the OTA is promised with this box and never made available to this day.
                              I also dont think we will see another firmware updates for this anymore.
                              May be we should switch over to CSA93 FW if that now has regular OTA updates sent by box maker.
                              Please advise if there has been more updates to CSA93 since November last year. Thanks

                              Comment


                                Originally posted by Vlad64 View Post

                                Yes, CSA93 firmware compatible with R-Box Pro (q6330).
                                Hi Vlad,
                                So happy to had seen this thread, i have the 3g version and sick of the slow official rom which i updated to latest, was all working great then went slooooooow over few days.
                                Do i need to flash this via imgburn tool? or sd card? and will i require twrp as i do not have this on mine currently.
                                Best wishes

                                Comment

                                Working...
                                X