NAND Chip Mask ROM Mode Short Location

[gefattern]

Hi again ,

what FW did you use for that ??? , for Restore is the best to install first the Stock .

report / gefattern

[alejandrocamu]

Hi again ,

what FW did you use for that ??? , for Restore is the best to install first the Stock .

report / gefattern

i talked with the one who sell me the TV box on alixpress, he send me a link with the original firmware, it is:
https://mega.nz/#F!UwgmFK6L!drtAcLRZ1EEb4FDoa2CUUA The thing is what i explained here: http://freaktab.com/forum/tv-player-...miracast/page7 I install the custom rom of my z28, the SCV1 and when i install it, i lost my wifi conection, maybe it modem is different or i dont know. thx

[gefattern]

i talked with the one who sell me the TV box on alixpress, he send me a link with the original firmware, it is:
https://mega.nz/#F!UwgmFK6L!drtAcLRZ1EEb4FDoa2CUUA The thing is what i explained here: http://freaktab.com/forum/tv-player-...miracast/page7 I install the custom rom of my z28, the SCV1 and when i install it, i lost my wifi conection, maybe it modem is different or i dont know. thx

Hi ,

let us talk here further , because u already ask there for help :

http://freaktab.com/forum/tv-player-...miracast/page7

gefattern

[Guest]

Short the pins indicated for the Z69:

[m4w]

Mecool M8S Pro+ v1.0 anyone?

Apparently, it's the same two pins as the Z69 above. You must access from the back of the PCB.

[leonkoum]

Οκ, i will try...
Lets hope it will works and the box come in live again.

[oilema87]

Hi guys, I have a problem with my tv box "H96 pro +" with Amlogic S912. The TV box when I turn it on, stays with blue light and on the TV "no signal". I used USB Burning Tool 2.0.8 but I do not recognize it. How can I fix it for you? It's brick? Thanks so much. I attach the photos

[Jesi]

Hi,
I have a tv box with the model XT-F7-V01 2015 - 0617 bricked and the chip is a Sandisk X50260971
Can any one help me out which pins do i need to short to get into mask mode
Regards,
Jes

[mattkix]

Short pin for new nand on A5x max rk3328...I could repair my device after put wrong firmware and boot loop.... Hope it helps..

Poslano sa mog Lenovo K53a48 koristeći Tapatalk

[Alpetrus]

someone with Sunvell t95z plus? where are the pins ? thx

Which pins should I short in this chip?

Chip: SanDisk SDINADF4-32G
TV Box T95Z Plus, Amlogic S912, 3GB/32GB, Wifi LTM8830

I can not boot into recovery mode.
USB Burning Tool shows errors:
[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
or
[0x10302001]Romcode/Switch status/Check connect/Enum device

Thanks in advanced for reply.

[Jack4speed3]

H96Max ..short circuit or pins?Thanx in advance.

[kaviazzz]

Hi, anyone knows the pins for KLMAG1JENB - B041 on board H96-P projector ?

Would be also great if someone knows the pins for the serial port

[superceleron]

Hoo i see why my rom dint work on you h96-p.... Yours is a S905X mine is a S905...
PS: check post #6 and #20.

[kaviazzz]

Hoo i see why my rom dint work on you h96-p.... Yours is a S905X mine is a S905...
PS: check post #6 and #20.

Really ?? and i have been trying to flash it back to stock rom using your backups which are i guess S905

[superceleron]

Really ?? and i have been trying to flash it back to stock rom using your backups which are i guess S905

Yes really mine is S905
I dint even know they made a s905x version of the projector...