NAND Chip Mask ROM Mode Short Location

[vlad1mir]

Hi all,

I have a T95 Max+, S905X3 processor, 4GB RAM and 32GB internal storage. I managed to brick it while booting up with Emuelec. I made it work before but I don't know what caused this issue. I tried pressing the reset button to enter recovery mode but it did not work. I am hoping that the mask ROM mode will work out. I've attached pictures of my board. Any help would be appreciated, thanks.

Full size images:
Front - https://i.imgur.com/iXt1NbU.jpg
Back - https://i.imgur.com/Na9s3pD.jpg

[Guest]

Try with two copper dots, make sure that you have good contact.

[vlad1mir]

Hi mAtvXk, thanks for the reply. The two copper pads did not work. I tried to the best of my abilities to have good contact but it was not detected by the Amlogic tool. I tried both of the USB (2.0 and 3.0) ports on the device and both did not work.

[Sameer9793]

hello i got my tanix tx3 max bricked it has amlogic s905w in it and the chipset is


CS_905W_TX_2C_V1.1

sorry for no pictures of my box i dont have a available camera right now

can anyone tell me which nand pins to short to get my box recoved by amlogic usb burning tool

[strangehero]

hello gudday my a95x f3 air 4gb 64gb suddenly not booting up, and no notification light on the device and no hdmi output in the led tv.. i try to reset it in the av hole but nothing happens.. the processor is amlogic s905x3.. how to locate the short 2 pin method to this motherboard.. thank you so much.. the image are indicated.

[BangJack]

I have HX1MAX device with Rockchip RK3318. I want to upgrade my firmware on my device. I use rkbatch tool but it gone failed. Now, my device bricked. It wont be detected on my computer. Which one that I should be pinned.

[Ondra]

Hello,

my H96MAX stay bricked after ROM update. Now is in MASKROM mode and I cant do nothing..
Anybody help me locate pins to reset NAND CLK, to switch loader?
Thanksfor any help.

images:

https://imgur.com/a/YJshwIq

[hudyj]

Hi. I can't upload any software to mecool K1 plus s905d. I have previously uploaded the software from the older s905 model and it is bricked. Does anyone know a way to reset the Samsung KLM8G1GETF-B041 memory?

[aligokpinar]

hello, please help me found the short pin for an x96 mini s905w..

thank you so much

[aligokpinar]

Burn_Card_Maker L(1041) Check uboot file after read failed...please help me..

[Sniper99]

Hi Anybody know witch pins short about nand chip mask in my case please?
-Device HP4105 / HP40A
-Amlogic S905X2
-Quad-core 1.8 GHz (ARM Cortex-A53)

https://www.mediafire.com/view/09lwpfv5ixtiv57/IMG_2672.JPG/file

[Hotrod1]

X96 Max Plus 4gb 64gb successfully recovered
thankful to mr. matvxk for provide me details

Could I get you to share those details with me? I've got the same box and need to unbrick it.

[Luiz Octavio]

Can someone help me with the short spot of km6 deluxe mecool? Her light just turns on and off. Thank you

[Hotrod1]

The picture in comment #822 shows the wrong pins. These are the correct pins confirmed.

https://imgur.com/AArFNMz

[soldiaz]

The picture in comment #822 shows the wrong pins. These are the correct pins confirmed.

https://imgur.com/AArFNMz

could be more options! Even possible to short using SD card housing's ground....