NAND Chip Mask ROM Mode Short Location

[Junior335]

I can't find on this forum nand short pin location for Tanix TX9 pro (s912, lpddr3, SCY nand)

[Piggycow]

Hello. Bricked tx9s. Tried all of the pins behind the SanDisk chip. Getting usb connection sound on pc sometimes however not on the flashing tool. Could someone post a dummies guide to do this please?

[phankhanh86]

Skyworth Digital HP40A / HP4105-Intigral / S905X2 / NAND: SanDisk SDINBDG4-16G

do you have firmware for it Ư?

[Exodusek]

hi can anybody tell me where this board short pin...

have same problem :/

[paokarass]

i try to flash with USB BURNING TOOL but stop at 7% with problem 0x32030201]Uboot/Get result/DiskInitial error (i try so many roms but thie problem remain)
M96X PLUS S912 PLEASE HELPPP IM ROOKIE

[klyt]

Tanix TX9 Pro-P 2GB/16GB bricked due to wrong firmware flashing. Please help me to short the pin eMMC. Thank you very much!

Have you found the short contact point

[soldiaz]

If you are able to start burning then is likely that you using wrong firmware or EMMC is damaged.

I doubt MASK MODE will help u out then....

[soldiaz]

short pins in indicated area by trying with screwdriver

[kml96]

source: forumXperience

Thank you so much. It worked on TX3 mini-A v1.4 also.

[jojoV]

X96 S905X / DDR3：2GB / eMMC: 16GB

pin + USB

[phankhanh86]

I can't find on this forum nand short pin location for Tanix TX9 pro (s912, lpddr3, SCY nand)

here

[condorserg]

Please help to find maskrom testpoints on this board.

[vominhtan2011]

Please help me this board: Magicsee N5. Thanks for all.

[klyt]

here

Is Tx9 Pro 2Gb/16GB also pin to these two points？

[mariahcarey]

Thank you @soldiaz
wordle