[ROM] Mecool KI Pro (S905D-DDR4-DTV) Android 7.1.1 - SCV2 (NOT SUPPORTED ANYMORE)

[jhoulll]

I tried file from post number 258 for on this page.

[jhoulll]

I managed to get the computer to see the box, but now I have this error. [0x10303004] Romcode / Switch status / Identify / Error result. and does not exceed 4%

[garnik_a]

your Boxing is accurate KI PRO ?

[jhoulll]

your Boxing is accurate KI PRO ?

What do you mean accurate ?

[garnik_a]

really KI PRO?

[jhoulll]

Yes

[garnik_a]

try just how to decide to serve food

[Jake360]

Yes

press start in usb burning tool first, plug USB in whilst holding reset button then power cable, just keep trying it will work its just a case of getting which order to plug things in an reset, it's a pain in the arse, try also pressing the top front on/off button instead of reset button underneath, it took me about an hour of messing about but got it in the end, trial and error, even try superceleron ATV version rom

[bpiq]

I also had a mistake like in the post # 272. The third time it went well. Try to load soft several times. Do not be put off by error.

[mecooljaime]

Hello everyone

My box Mecool K1 pro, I think what is bricked. USB engraving software does not recognize it (15 cm male / male USB cable). I also tried all the USB port of the box several times. (Pressing the recovrery + power cable)


Also with a 4gb SD card does not update (I tried: BurnCardMaker, BootCardMaker). With always pressing the recovrery behind the box and always the blue light on and no access with the control command, nothing happens.

I tried with:
KI_PRO_AVL6862-NMF26Q-20170519.183520.V0321.img
and also videostrong .img

What can be done yet?

Thank you all for your help and support.

Another user Maddone has the same problem as me post # 272

[mecooljaime]

Excuse me the last sentence is wrong

Another user Maddone has the same problem as me post # 253 and not post # 272

[garnik_a]

• jhoulll 02-12-2018, 13:06
  Bingo. I pressed the processor and the box turned on. but sometimes it shuts off because the processor should drop from the board. How to fix it? Thanks
• 
  garnik_a 02-12-2018, 19:23
  Reball of CPU

[mecooljaime]

Does anyone have the KI Pro mainboard photos?

If I have the photos I can search on the components to try to see which are the possibilities of unbricked this box.

Thank you all

[rexis]

I managed to get the computer to see the box, but now I have this error. [0x10303004] Romcode / Switch status / Identify / Error result. and does not exceed 4%

Hi, I have the same problem here, my box is bricked, just blue light, PC can't see it at all, I even trier to short nand pins without any results, plz how did you manage to get it recognised by PC
thx

[bugra_81]

I use once and I try again by deleting your system which allows you to regenerate your load using a different rom, sd card and usb otg are not seeing, it stays frozen for you to delete for your system. how can i solve the problem?