[ROM] Mecool M8S PRO+ TVStock Nexus ROM (Android TV 7.1)

[karurosu15]

No more update?

[uscool]

Hi, can anyone help me i have bought boxes in the past from gearbest and geekbuying and had no issues with using custom rom

latest one i bought from geekbuying i noticed the stock firmware is 20171208.183013.V0928 and flashed the custom rom and it was crashing box keeps restarting I have attached pictures of board chip and rom version that it came with .. is this box not suitable for custom rom ?

ROM version it came with

https://imgur.com/a/wYPTa

Board Chip

https://imgur.com/a/ewN9e

Thanks

[vuckovicm]

Hi all,

i have a huge problem. I have been using this rom for some time without any trouble.
However, i tried to unroot it and now when I turn on the box, after a nexus sign passes i get stuck into the google sign.
Now, I have the box without the reset button and i tried to reset it by reconnecting pins on the motherboard to enter in twrp or bootloader so I could install freshly with usb burring tool but unsuccessfully.
Ether way when i plugin the usb or power cable it just start booting but then it stays stuck.
any help or I bricked my box?

[georgesaumaitre]

hi,

I buy this box only to watch Amazon prime video on my TV, and a guy on Gearbest write in comment that this box working well with Prime video...
but...... with the original rom or with this android TV .... I can't !

I've try several apk, and in the best case app install but don't read video.
I try through Web browser.... same thing...

someone here have success ? Have I miss something ? someone can help me please ?

I really don't understand that all smart phone under android work fine with prime video but TVbox can't.....

thank you for your help

[uscool]

Hi wonder if anyone can help me ordered few boxes from gearbest and geekbuying no issues with flashing and using custom Rom run fantastic

and just received the latest 3 from geekbuying , went ahead to flash 1 of them but kept getting crashes and restarts I have taken pictures of the rom that came with and seems newer then before and also taken picture of board chip

not sure if want to flash the other one just incase this rom issue and not box issue also cannot find the stock ROM 20171208.183013.V0928 so can flash it back and see if still get same issues

Have attached pictures thanks

[usb]

Hi
usb
I have buy an European version on Gearbest (France warehouse) one week ago.
I received one with a chip samsung batch sec 728, and no problem to flash.
Georges

Thanks a lot Georges !!!!

usb

[georgesaumaitre]

Hi
usb
I have buy an European version on Gearbest (France warehouse) one week ago.
I received one with a chip samsung batch sec 728, and no problem to flash.
Georges

[hash95]

Hi,

First of all thank you for the great work Guest .

I noticed two issues using the ROM for a little bit more than 2 weeks :
- Issue when using a 2.4GHz keyboard (Logitech Wireless Touch Keyboard K400 with French Azerty layout). Whenever I change the layout to French Azerty layout, the layout set up is not saved. As a result I can only use the chosen layout until I restart/sleep the box. After starting back the box, the layout is set back to default value (US Qwerty layout). I there any way to save the chosen layout or set it as default?

- Whenever I browse want to modify settings in 'Settings > More Settings > Languages & input' and try to press the Back button, the setting app crashes and stop (I'm suddenly back to home screen). Is anyone facing the same issue?

Hash

[usb]

Hello,
I just ordered an European version of the box on gearbest.
Is anybody try to flash successfully this version to Android tv ?
Thanks in advance for your feedback.
usb

[csiribi]

Hello.
Possible any way to unroot this rom?
Thank you

[steel120]

M8S Pro Plus simple cooling experiment.

Room Temperature at the time of the temperature measurements was 20-21C
Unit temperature idle with just default home screen is 40c-- no activity.

My M8S Pro Plus using the CPU-Temp APK and stock OEM firmware and heat sink, Generates a Cpu Temp reading of 79-80 C using Kodi 17.6 during scraping for sources.
Upon finding a source, and running a 1080 movie, the temperature are 68-72 C.

Just as a simple trial to get the temperature down. I have a 12vdc 80mm 100ma fan, which I installed a USB plug. I set the fan perpendicular to the M8S pro plus so the air would flow in to the
side vents of the box. Plugged the usb connector in, fan runs at moderate speed, no noise, on the 5vdc USB port with a 35ma draw.
The results..Kodi streaming temperature dropped to 47-50C on 1080 stream, when scraping, temperature was around 59-61C.

Nice thing about using the outboard fan, the USB port when the unit is turned off by the remote, the USB power is also turned off, so the fan is not on while idle/not in use.

Most USB cables are somewhat standard, I.E. red is 5 vdc, and black is ground. So red to red on fan, and blk to blk on fan.

I also tried Terrarium 1.9.2 on the same 1080 stream Temperature of The box using Terrarium was 10c less than Kodi 17.6
Scraping with Terrarium also shows 10 c less than on Kodi 17.6

I did these simple tests in preparation of receipt of the MeCool M8S Pro -W and -L.
Since I have read that many have heat issues with the -L versions.
I just wish to avoid any heat related issues with the simple fan use.

The -w should show up any day now, with the -L to follow by about 7-10 days.
Upon arrival, I will re-test my simple cooling fan add-on.

Temperatures would go down more if I cut out an opening in the top and placed the fan directly above the CPU heat sink.
Which is what I think I will do for a permanent solution.

If you decide to try this, I would make sure you have some idea of what the current draw of the fan you are going to use, most are marked
directly on the fan, such as 12 vdc @ 100 ma as an example, most USB ports current output is about 500mha depending on device.
As I mentioned above, my fan is drawing 35ma at the 5vdc via the USB port (measured).

BobFlyer

[Saimon]

Hey many thanks for the TV stock variant. But now I have myself a problem. I purchased 2 mecools, one for me and one for my father. The thing is that I updated both to TV Stock variant because I like it a lot and I think is the perfect experience, but my father somehow thinks that the TV Box was fine with version 20171124. The thing is that I searched 20171124 downloaded it, and went to install it but I get error: the firmware model is "p21x"

What can or should I do?

I ended up downloading 20170919 fixed version and then went back to stock smoothly, after that I managed to install easily 20171124 or 20171128 (both work ok for me, i don't know the differences)

Thanks! The online retailers may have more specific information on the affected batch. We've had to just narrow it down by process of elimination.

[geordieboyo]

So my M8S Pro Plus box arrived today - https://goo.gl/QRwKW6

Just a couple of things, how do i go about checking to see if this box is ok to flash the firmware ? And if you need to remove the cover, how do you do this? I see no screws on the bottom of the box.

the firmware out of the box is 20170919.150557.V0619 if that helps?

I’ve used a eMMC check app and it says

Type: 016GE2
Date: 06/2014
brick bug? No sane chip

is this enough info to confirm this box is ok to flash this firmware please?

[draxd]

Do you think it's possible to add Playready DRM support?
s905x soc should support this, but DRM info suggest the opposite and as far as i know, this is the main reason why we can't play video in Amazon Prime Video Android TV App.

I do not think it will happen. Playready licence is pretty expensive for small chinese company, and also Microsoft is pretty paranoid to share it with small chinese company.