[ROM] Beelink GT1-Mini (and some others) AndroidTV v.2.0 by Sasvlad Android 9.0

[Sasvlad]

Hello.

Does anyone know if it's possible to flash this with the SD card method? Perhaps by using Amlogic's Burn Card Maker?

Thanks!
P.

Yes.
SD Card Method: Amlogic's Burn Card Maker

[PhoebusCY]

Yes.
SD Card Method: Amlogic's Burn Card Maker

Thank you Sasvlad .

If you could also point me towards the right options to select before making the card please I would greatly appreciate it - just trying to avoid a brick! The options available are:

To Partition and Format - Y/N

erase_flash - Yes (erase in normal / erase in force / erase in total / forcely erase all)

erase_bootloader - Y/N

Reboot - Y/N


Also, another quick (and maybe dumb) question - if we're flashing with the USB Burning Tool, does the box need to be entered in Recovery mode first? I assume yes but I don't see it mentioned in the Beelink tutorials that's why I'm asking. This is for a GT1-mini btw.

Thanks again!

[Sasvlad]

Also, another quick (and maybe dumb) question - if we're flashing with the USB Burning Tool, does the box need to be entered in Recovery mode first? I assume yes but I don't see it mentioned in the Beelink tutorials that's why I'm asking. This is for a GT1-mini btw.

Thanks again!

No.

[chabs]

Have you looked into the droid settings (not the normal settings)
In "display" then "HDMI" I think something like "adaptative"
In some firmwares you have off ;level 1;level 2
I think level 1 only changes refresh rate on full screen video.

Enviado do meu POCOPHONE F1 atrav?s do Tapatalk

I did take a look the closest thing I have is HDMI self-adaptation - it is set to off. Screen resolution i set to auto switch to best resolution. I have tried changing this to manually pick my resolution but it doesn't help.

[kenduvernay]

Hello.

Does anyone know if it's possible to flash this with the SD card method? Perhaps by using Amlogic's Burn Card Maker?

Thanks!
P.

Yes it is.

[moabile]

Flash it and check how your remote works with this firmware. If everything is ok, using ADB copy the bootloader block and save it on your computer.
After that, flash my firmware back, and through ADB ( or Terminal) replace Bootloader.

Hello,

I am trying to do the same manipulation.
I have difficulties to "backup" and "flash" the bootloader using adb/fastboot because I don't seem to be able to connect to the debug using the male-to-male USB cable.

All I managed to do is to backup the bootloader via remote--> adb connect xxx:xxx:xxx:xxx:5555
su -c "dd if=/dev/block/bootloader" > /sdcard/bootloader.img

But once I reboot to bootloader (in order to flash the bootloader) I cannot connect to the device anymore remotely....

So I am a bit loss

Can you help me?


thanks in advance!

[Sasvlad]

Hello,


All I managed to do is to backup the bootloader via remote--> adb connect xxx:xxx:xxx:xxx:5555
su -c "dd if=/dev/block/bootloader" > /sdcard/bootloader.img

So I am a bit loss

Can you help me?

thanks in advance!

Similarly, you can remotely execute the reverse command:
su
dd if=/sdcard/bootloader.img of=/dev/block/bootloader

Or you can copy this file through the root explorer at /dev/block/

[moabile]

Similarly, you can remotely execute the reverse command:
su
dd if=/sdcard/bootloader.img of=/dev/block/bootloader

Or you can copy this file through the root explorer at /dev/block/

MEGA THANKS!

I am now able to TURN ON the Beelink GT1 S95X with the REMOTE on your Android 9.0 Roms!

if someone is interested-->

original bootloader: link for S95X version
https://mega.nz/#!ZxEGCIIb!em_4kZznD...AsbJxKIe89zn6Y

Commands should be something like:

adb connect xxx.xxx.xxx.xxx:5555
adb push "C:\download\bootloader_ori.img" "/sdcard/"
adb shell
su
dd if=/sdcard/bootloader_ori.img of=/dev/block/bootloader
reboot

[rodamanthis]

i ve downloaded the version for gta GT1-Mini_ATV_v.2.0_by_Sasvlad_B95 i cannot unrar it

[blacksnoopy]

hey man，can you make a new rom for beelink gt-mini? The new official firmware 002P0(android 9.0) fix the hdmi-cec problem.

[Ft1a]

Hi, I just flashed this rom on a brand new T95Q but wifi is not working and the wired network connexion is not working too, I'm stuck id the early steps of the setup. I flashed the 95x version, should I try the other version?

[251643711]

[ROM] Beelink GT1-Mini (and some others) AndroidTV v.2.0 by Sasvlad (Android 9.0)

Hi, I present to you another ROM for this box.
I've made 2 different ROM's for these boxes, for boxes starting with SN: 95X and another for SN: B95

Please download the correct ROM for your box.

---

Changelog v2.0:

• built-in the TWRP recovery 3.2.3-1.
• changed init.d mechanism
• removed the ancient Chinese busybox
• updated busybox and all its links in vendor
• a newest SU binary is installed
• installed patched SuperSu 2.82 that does not require updating
• USB debugging is enabled by default, full AdbShell support, Selinux is disabled
• Noise reduction disabled
• Installed a program to manage the service Auto Frame Rate (afrd)
• changed Framework. Cut out the System Tray, but left the Navigation Bar
• 13 WiFi channels

The following applications are added:

• Opengapps Atv (at the very minimum)
• App Drawer
• Explorer X-plore, for remote
• Alternative Market AptoideTV
• GoogleChrome v.57. Do not update it, if you want to use copy-paste

The second file in the archive is the md5 hash to check.

---

Verified on the following devices:

• - Beelink GT1 Mini (both revisions)
• - Х96Мах 4/32 и 4/64
• - T95Q
• - Tanix TX5 Max

On the last 3 boxes (old revisions), install 95X firmware.

---

Want to buy me a beer?

• Donation Link Press Here

---

Download:

• DOWNLOAD HERE THE GT1-Mini AndroidTV v.2.0 by Sasvlad 95X
• DOWNLOAD HERE THE GT1-Mini AndroidTV v.2.0 by Sasvlad B95

Patch for T95Q and X96Max to control the serial remote control ->
(install with TWRP )
https://drive.google.com/file/d/15W-...ew?usp=sharing

---

To users of T95Q and X96Max:
with this bootloader, the power button from the stock remote control will work in your boxes.
How to replace it:

su
dd if=/sdcard/bootloader.img of=/dev/block/bootloader

---

Install instructions:

• Use USB Burning tool 2.1.7.0
• Refer to Beelink own tutorial how to flash this box!

---

Enjoy it!

• 10. Added DTS-HD and Dolby TrueHD passthrough support in Kodi, VLC

Which version of this feature can be supported? like Ugoos X2, Iundefinedm sorry for my English.

[hajvaniboy]

Hello,

any solution for T95q not working wifi and bt? I installed SN: 95X version with USB Burning tool 2.1.7.0.

[Ft1a]

Hello,

any solution for T95q not working wifi and bt? I installed SN: 95X version with USB Burning tool 2.1.7.0.

I think the solution is to take the wifi drivers from the T95Q version of this rom https://forum.freaktab.com/forum/tv-...-roms-tools-do , wifi is working on it

[hajvaniboy]

I'm sorry.... the link redirects me to root of tools. And please is there any tutorial how to change drivers. I now know that i have 2nd revision of T95q (100M ETH). And by now i tried some custom firmwares and there is always something missing.
8.1 version (ETH doesn't work)
9.0 version (wifi bt and remote doesn't work)

Only on stock everything works except that there is limited google play store apps because of device...