Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

T-R42 2.0 Board Firmware by lewy20041

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    This firmware is ok for my Android Box B351 V2.0

    Hi lewy20041,

    thanks for your work.

    This firmware is the only one that works for my box (B351 V2.0).
    There will be a future version with a kernel enabled to overclock the CPU / RAM / GPU?
    Wasser kernels can work on my box?

    Thank you

    Update 1: lewy20041, I found in your first post the OC kernel, I'll try it. Thanks.

    Update 2: I tried to flash your OC kernel but Rockchip Batch Tool 1.7 show "load firmware failed!". How I flash kernel?
    Last edited by picarddontoro; 09 February 2014, 03:59.

    Comment


      Flashing Kernel

      Originally posted by picarddontoro View Post
      Hi lewy20041,

      thanks for your work.

      This firmware is the only one that works for my box (B351 V2.0).
      There will be a future version with a kernel enabled to overclock the CPU / RAM / GPU?
      Wasser kernels can work on my box?

      Thank you

      Update 1: lewy20041, I found in your first post the OC kernel, I'll try it. Thanks.

      Update 2: I tried to flash your OC kernel but Rockchip Batch Tool 1.7 show "load firmware failed!". How I flash kernel?
      I also have the same stumbling block

      How does one update the kernel . I have scoured for three hours online , all information is very vauge can anyone please clarify ?

      Comment


        Originally posted by lewy20041 View Post
        edit build.prop and change lcdensity to 240.
        hi,
        I tried as su a chmod before editting but it fails, system file; so I cannot save the changes.
        any hint?

        thanks

        Comment


          Originally posted by 90Ninety View Post
          I also have the same stumbling block

          How does one update the kernel . I have scoured for three hours online , all information is very vauge can anyone please clarify ?

          I finally succeed.
          Put device into flash mode, run RKAndroidTool v1.37 (not RKBatchTool v1.7) and enter as a only line:
          [check on], 0x00004000 (Address column), kernel (Name column), kernel.img (Path column)
          Where "kernel.img" is the kernel file to flash.
          Finally, click on Run.

          Comment


            Originally posted by teebees View Post
            hi,
            I tried as su a chmod before editting but it fails, system file; so I cannot save the changes.
            any hint?

            thanks
            i found the answer after 5 min on


            it is ok now with the lcd resolution

            Comment


              How

              Originally posted by picarddontoro View Post
              I finally succeed.
              Put device into flash mode, run RKAndroidTool v1.37 (not RKBatchTool v1.7) and enter as a only line:
              [check on], 0x00004000 (Address column), kernel (Name column), kernel.img (Path column)
              Where "kernel.img" is the kernel file to flash.
              Finally, click on Run.
              How did you do this ?

              there are no instructions for RKandroidtool

              Which kernel did use

              Maybe post a tutorial

              Comment


                Originally posted by 90Ninety View Post
                How did you do this ?

                there are no instructions for RKandroidtool

                Which kernel did use

                Maybe post a tutorial
                The kernels are in the first post (OC Kernel Pack).
                I used 720p_cpu1.8_gpu798h_ddr800.img without proplems on my B351 V2.0 box.

                The procedure I used is the one described in my previous post.

                RKAndroidTool v1.37 is present in the wasser 's firmware in this post:

                Comment


                  Wifi Problem

                  Hey Lewy, i'm having really bad wifi problems on the rom. Is there anything you can do? When my wifi works I get maybe .3 down and .3 up. The connection is to slow for anything especially streaming home videos. I've reinstalled twice, changed out kernels.

                  Comment


                    HI lewi,

                    I have one of these and on your rom it runs well, would it be possible to get the "hide home bar" working on this rom?

                    thanks for your help!

                    Comment


                      Originally posted by stubuchy View Post
                      HI lewi,

                      I have one of these and on your rom it runs well, would it be possible to get the "hide home bar" working on this rom?

                      thanks for your help!
                      So is the wifi working well for you? How many times did you install or reinstall?

                      Comment


                        Originally posted by timenewton View Post
                        So is the wifi working well for you? How many times did you install or reinstall?
                        How do you install diff kernel with this batch tool?

                        Comment


                          Ok yeah I dont know what you guys to do to get your wifi to work, but it is terrible. Cant stream anything

                          Comment


                            Hey, Lewy, will there finally be an Update?

                            Comment


                              Rom

                              Lewy

                              Great Effort with the ROM , possibly the only custom made ROM available . I Have the 1.8 Ghz OC kernel @ 1080p , however this runs slower than my other Android devices ( Samsung Galaxy Tab 7") , despite the Device having better hardware spec

                              For all those having trouble with Wi-fi you need to configure your WIFI settings on the Router web interface and change the Spped settings from 300 Mps to 54 Mps

                              Comment


                                Sup Lewy.
                                ROM works great. However.. Your OC 1080p kernels give me poor play back in xbmc like stuttering no h/w acceleration but my xbmc version has h/w. 720p HD works fine with your justxbmc just the 1080p kernels. Android UI is a little laggy v 720p when using the 1080p_cpu1.7_gpu798h_ddr720 kernel

                                None if the kernels at 1,8ghz work for me. Box gets stuck on boot logo

                                Xbmc crashes on 720p&1080p playback using 1.7,OC kernel.

                                Also if I use the switch resolution option in advanced settings I lose my 1.7ghz OC and it defaults back to 1080p @,1.6ghz

                                Appreciate your work
                                Last edited by ollie26; 01 March 2014, 02:03.

                                Comment

                                Working...
                                X