Wish List for MTK Tablet ROM's

[dcaman]

Cube U27GT Wifi

Thanks Riley,
Hope Christmas and new year will bring me alot of new ROMS...

Regards
DcaMan

If 900supersport doesn't want to do one...I can take a look.

Stay tuned.

[flux1000]

Try this:

http://www.freaktab.com/showthread.p...614#post264614

Thank you very much indeed for the ROM, Riley...this is very good news,..a custom ROM!!!

I tried to flash and an error turned up. I posted it in the above link, ...I thougt it's the right place, isn't it?

Happy New Year everyone of you!!!

[rrileypm]

Thanks!!!!

IMG!!!! That would be a perfect Christmas present for every Teclast T98 owner...

Thanks rrileypm.

Try this:

http://www.freaktab.com/showthread.php?21322-Teclast-T98-4G-RileyROM-1-0&p=264614#post264614

[flux1000]

I will try to get to a T98 ROM in the next couple of days. Stay Tuned.

Remind me, if I forget.

Thanks!!!!

IMG!!!! That would be a perfect Christmas present for every Teclast T98 owner...

Thanks rrileypm.

[rrileypm]

I will try to get to a T98 ROM in the next couple of days. Stay Tuned.

Remind me, if I forget.

[flux1000]

Rooted ROM for Teclast T98 4G.

Hello everyone

It would be wonderful if someone could provide a ROOTED ROM forma this one:

1. Brand Name: Teclast
2. Model Name/Number: T98 4G ,model C6R2
3. Which MTK chip is installed: MTK 8752
4. Link to stock firmware or a ROM dump from your device:

http://www.teclast.com/tools/pad/putcode.html. ( entre "C6R2" as model)


5. Total NAND flash capacity:16Gb
6. Screen resolution: 2048x1536

This tablet is wonderful, I would even dare to say that better than the U65GT...great quality tablet. The Big.little does its job here. Screen, sound, everythig works without a hitch...I'm going to release a videoreview in a couple of days. I think this can be a superseller but with 4G.

As It's very new, there is no one click root solución yet, so I'm trying to install with SP Flash Tools a custom recovery....with no success by the way. So, any heavy gun support would be ver y muchos apreciatted....

Thanks in advance.

[rrileypm]

Wish List for MTK Tablet ROM's

I need a KitKat 4.4.4 ROM for my Ampe A73

1. Brand Name: AMPE
2. Model Name/Number: AMPE A73
3. Which MTK chip is installed: MT8382
4. Link to stock firmware or a ROM dump from your device: didn't find one
5. Total NAND flash capacity: 8GB
6. Screen resolution: 600X1024
7. Build: A73_01_V006_20140414
8. CPU: ARMv7 Processor rev3, Quad core

I can work from a MTK Droid Tools backup...if you can provide one. Instructions are all over Google...but you have to be rooted first.

Otherwise, I need a link to factory firmware.

[rrileypm]

Wish List for MTK Tablet ROM's

Dear Randy,

I would like a magic Rom file for my tablet.
By the moment I'm not rooted (is it needed to update the rom ?)

1. Cube
2. U27GT Wifi only
3. MKT8127
4. http://www.51cube.com/ch/downshow.asp?ID=262
5. Total NAND flash capacity: 8GO
6. 1280 x 800

Thanks for your support
DcaMan

If 900supersport doesn't want to do one...I can take a look.

Stay tuned.

[omar24th]

KitKat for AMPE

I need a KitKat 4.4.4 ROM for my Ampe A73

1. Brand Name: AMPE
2. Model Name/Number: AMPE A73
3. Which MTK chip is installed: MT8382
4. Link to stock firmware or a ROM dump from your device: didn't find one
5. Total NAND flash capacity: 8GB
6. Screen resolution: 600X1024
7. Build: A73_01_V006_20140414
8. CPU: ARMv7 Processor rev3, Quad core

[RuSaMa]

Dear Randy,

I would like a magic Rom file for my tablet.
By the moment I'm not rooted (is it needed to update the rom ?)

1. Cube
2. U27GT Wifi only
3. MKT8127
4. http://www.51cube.com/ch/downshow.asp?ID=262
5. Total NAND flash capacity: 8GO
6. 1280 x 800

Thanks for your support
DcaMan

I have the same tablet. Would be fine to get a better ROM than the original

[dcaman]

U27GT WIFI

Dear Randy,

I would like a magic Rom file for my tablet.
By the moment I'm not rooted (is it needed to update the rom ?)

1. Cube
2. U27GT Wifi only
3. MKT8127
4. http://www.51cube.com/ch/downshow.asp?ID=262
5. Total NAND flash capacity: 8GO
6. 1280 x 800

Thanks for your support
DcaMan

[mmkarim]

Issue with Cube U25GT

Hi Connorrr,

Were you able to solve this problem? I am having the same issue with the Cube U25GT-C4W. Its really a strange issue. Seems like a kernel/hardware issue with both of these tablets.

Hi, I'm pretty new to kernel mod world but I'm trying to allow my Pipo T9 to charge whilst a USB device is attached. The T9 has a usb port and a 5v DC input but USB Host only allows one one or the other to occur at a time. I have tried using an OTG-Y cable but this is blocked in the firmware (stops charging when USB device is connected). Would it be possible to allow OTG-Y charging while a powered USB stick is connected or allow the 5VDC line to charge while the USB input is set as host?

1) Pipo
2) T9
3) MTK 65892 Cortex A7,1.7GHz,Octa-core CP
4) Stock Firmware (http://www.freaktab.com/showthread.p...hone-Tablet-PC)
5) Not sure about the nand chip, sorry
6) Resolution 1920X1200pixels; 254 PPI

Thank you in Advance

[JBFROG]

CUBE Talk 9x : USB Audio OTG ?

Hi,

It would be great to activate the USB Audio OTG for the Cube Talk 9x U65GT which works under 4.4.2 (supposed to be out of the box feature).
It works fine with USB Audio Player Pro, a program I purchased.
But I don't like this program and interface.

Thanks for your support.

EDIT : Mediatek now has opened its sources. You can find it here : https://android.googlesource.com/kernel/mediatek/
Hope that will help you.

[rfgod3]

Cube Talk U55GT-8c/ Talk 79 Octacore

Please can u do a custom rom for this device.
link to firmware http://www.51cube.com/ch/DownShow.asp?ID=273

thanks

[Connorrr]

Pipo T9 with USB OTG-Y charging

Hi, I'm pretty new to kernel mod world but I'm trying to allow my Pipo T9 to charge whilst a USB device is attached. The T9 has a usb port and a 5v DC input but USB Host only allows one one or the other to occur at a time. I have tried using an OTG-Y cable but this is blocked in the firmware (stops charging when USB device is connected). Would it be possible to allow OTG-Y charging while a powered USB stick is connected or allow the 5VDC line to charge while the USB input is set as host?

1) Pipo
2) T9
3) MTK 65892 Cortex A7,1.7GHz,Octa-core CP
4) Stock Firmware (http://www.freaktab.com/showthread.p...hone-Tablet-PC)
5) Not sure about the nand chip, sorry
6) Resolution 1920X1200pixels; 254 PPI

Thank you in Advance