Wish List for MTK Tablet ROM's

[rrileypm]

I'm only able to work from factory firmware designed specifically for the tablet. If KK is available, it will have to come from Lenovo, becasue they have the original sources. I don't even have one of those tablets to test, so it would be impossible for me to port KK to it.

[bengalkartalı]

https://www.dropbox.com/s/r5a49ypq3n...W_SMS.rar?dl=0

Ok i have edited the link again , i am waiting the news soon

Btw i wonder with a new ROM such as KitKat is it going to be active for calling because there is no calling option in this ROM beside that those factory applications are going to be exist in KitKat again or to make the system more stable going to be removed ?

[rrileypm]

Please update your link to the shared file.

[bengalkartalı]

Device Name:Lenovo-IdeaTab Tablet 16GB Memory
CPU:MTK8389 quad-core processor 1.2 Ghz (Wifi)
CPU type: ARmv7 Processor rev 2
Device model:Lenovo ideatab S6000-H
Kernel version: 3.4.5
Serial Number: HA046CV0
Root status:Yes
Has recovery:Yes
Screen resolution: 1280*800
Stock ROM: Just below link

http://www.dropbox.com/s/r5a49ypq3n...W_SMS.rar?dl=0

Graphics: MT8389 integrated
RAM:1 GB

Is it possible a KitKat for this device and also calling function if you need anything I can help I am waiting impatiently

[hocuspocus69]

Alright, Hocuspocus69, here is your ROM. This is for the Teclast T98 4G.

Since I don't own one of these tablets, you will have to be the first tester.

All of the cool stuff is in the RileyROM folder. Changes made to boot.img and system.img.

You can use the SP Flash Tool provided in the ROM kit, or the one from the factory firmware.

Included in the kit are two alternative recovery images. One is a test TWRP Recovery...if it boots as stock recovery, there's something wrong with the tool I used to make it. The other one is a CWM Recovery I tried to make with MTKDroidTools....again, I don't know if it works or not. So I'm anxious to hear a report.

Just follow the instructions in the First Time User's Guide in the root folder of the ROM kit, among all of the SP Flash Tool files.

Download

If you report positive results, I will start a new thread for further discussion of this ROM.

finally i can try your firmware for teclast t98 4g C6R3 32 GB
if i flash boot.img result is bootloop on teclast logo before your logo
recovery is good
twrp not function
twrp made by hunama (you can see it around the forum) is good but some problem with font it can't find
thanx

[rrileypm]

1. Brand Name: iRulu eXpro X1s Series
2. Model Name/Number: T10N
3. Which MTK chip is installed: MTK 8127
4. Link to stock firmware or a ROM dump from your device: ****= http://www.****.com/itm/230941040324...%3AMEBIDX%3AIT
5. Total NAND flash capacity: 8GB NAND
6. Screen resolution: 1024*600

Please provide the serial number of your tablet. IRulu's firmware is listed by serial number.

[darwiny2k]

1. Brand Name: iRulu eXpro X1s Series
2. Model Name/Number: T10N
3. Which MTK chip is installed: MTK 8127
4. Link to stock firmware or a ROM dump from your device: ****= http://www.****.com/itm/230941040324...%3AMEBIDX%3AIT
5. Total NAND flash capacity: 8GB NAND
6. Screen resolution: 1024*600

[rrileypm]

Here is a link to the new Cube T7 RileyROM based on the above firmware provided by Taajan.

http://freaktab.com/forum/mtk-based-devices/mtk-tablets/current-roms/495600-cube-talk-t7-rileyrom-1-1

Please direct all posts concerning this ROM to this new thread.

[rrileypm]

This is part of the confusion of discussing multiple devices on the same thread. The EBR files in the firmware posted above in post #150 are for a different device. We still don't have this for the Cube T7, so I'm still unable to change app space yet.

[rrileypm]

Great. I'll put together a complete ROM with these files. There's no corruption in this rar, so we are good.

I did get the EBR files from the above link. I'm not sure why Cube didn't include them in their update. Chances are they didn't change from the previous firmware, so they didn't include them in their kit....so the old ones should work. I don't have a Cube to test, so someone will need to verify.

[rrileypm]

I was able to download the file, but the system.img file shows to be corrupt....I can't get it to extract from the rar. Can you try to extract it and see if you get the same error?

[rrileypm]

For some odd reason, I can't download anything from Baidu. I'm trying to solve the problem on my end....but since I can't read Chinese, it is almost impossible to get their downloader working correctly.

Could you provide an alternative URL for me to download this file...maybe Google Drive or Dropbox?

[sevo1984]

Also please do a search on your device for the actual build.prop and send that too.

Here is the link (firmware.info, scater file and build.prop):

https://drive.google.com/file/d/0B4TbDGsXelNfNzIyVE9VSFE5eTQ/view?usp=sharing

firmware.info was actually present in the larger file I uploaded (full rom dump), I used MTK_rom_studio to convert it to scatter file (found out that PDA net can also do it, but MTK_rom studio doesn't require installation
when I search "build.prop" in Total Commander before I copy it on SD card, it shows in the following way:
build.prop -> /custpack/build.prop
(don't know whether it's relevant to you, as it copies just normally)
Hope this is it. Many thanks!!!

[rrileypm]

Also please do a search on your device for the actual build.prop and send that too.

[sevo1984]

The ROM dump you provided doesn't contain the scatter file. I can make a new system.ext4.img and a new boot.img which will provide most of the custom changes, but I need to have the scatter file to complete the ROM kit for flashing.

All right, I apologize, I thought everything was included in the firmware dump. Will do so & send you the link. Cheers