Wish List for MTK Tablet ROM's

[rrileypm]

1. Brand Name: Teclast
2. Model Name/Number: T98 4G ,model C6R3
3. Which MTK chip is installed: MTK 8752
4. Link to stock firmware or a ROM dump from your device:

http://www.teclast.com/tools/pad/putcode.html. ( entre "C6R3" as model)


5. Total NAND flash capacity:32Gb
6. Screen resolution: 2048x1536

what do u think can i use system.img from your 16gb version?
thanx

It took almost 24 hours to download this firmware...but I have it and will begin work on a ROM today after I finish one up for the Pipo P1. Stay Tuned.

[rrileypm]

rca voyager 7"
rct6773w22
mt8127

https://drive.google.com/folderview?id=0B879PodOxRLEfmZfeGtDWS1zenlxYWY2ZWpGRHV1dHhnZ1ZwUTBvekE2bGdiVDd5cjBkY0E&usp=sharing&tid=0B879PodOxRLEUE9BeTBRd2ZhYm8

8gb
1024x600

I'm downloading now. This looks a little different than most MTK firmware, so I will have to take a closer look after I get it.

Stay Tuned!!!!

[rrileypm]

1. Brand Name: Teclast
2. Model Name/Number: T98 4G ,model C6R3
3. Which MTK chip is installed: MTK 8752
4. Link to stock firmware or a ROM dump from your device:

http://www.teclast.com/tools/pad/putcode.html. ( entre "C6R3" as model)


5. Total NAND flash capacity:32Gb
6. Screen resolution: 2048x1536

what do u think can i use system.img from your 16gb version?
thanx

I had no luck downloading this file. It took 24 hours to download from Teclast and the system.img was corrupted. Can you upload to Google Drive or a similar site for me to grab the file?

[leetree2001]

UBIFS

I'm downloading now. This looks a little different than most MTK firmware, so I will have to take a closer look after I get it.

Stay Tuned!!!!

the cache,system,userdata i think ubi file system on mtd...

[rrileypm]

rca voyager 7"
rct6773w22
mt8127

https://drive.google.com/folderview?id=0B879PodOxRLEfmZfeGtDWS1zenlxYWY2ZWpGRHV1dHhnZ1ZwUTBvekE2bGdiVDd5cjBkY0E&usp=sharing&tid=0B879PodOxRLEUE9BeTBRd2ZhYm8

8gb
1024x600

I hate to be a party pooper, but this ROM dump is in a totally different format than I'm used to. The system is a UBIFS format...and I simply can't find any tools that will unpack/repack it on my system. It's going to take a DEV with UBIFS experience and tools to mess with it....sorry.

[leetree2001]

I hate to be a party pooper, but this ROM dump is in a totally different format than I'm used to. The system is a UBIFS format...and I simply can't find any tools that will unpack/repack it on my system. It's going to take a DEV with UBIFS experience and tools to mess with it....sorry.

afraid of that,thanks anyhow!!

[rrileypm]

I did leave a note in our developer's forum for a little help on that one. Maybe one of our other developers has experienced a ROM like this. Don't give up hope, entirely. Keep checking...we might have something for you...but it's beyond my own current capabilities.

[hocuspocus69]

I had no luck downloading this file. It took 24 hours to download from Teclast and the system.img was corrupted. Can you upload to Google Drive or a similar site for me to grab the file?

uploading now to mega.co.nz 3-4 hour to go!
thanx

[hocuspocus69]

1. Brand Name: Teclast
2. Model Name/Number: T98 4G ,model C6R3
3. Which MTK chip is installed: MTK 8752
4. Link to stock firmware or a ROM dump from your device:

http://www.teclast.com/tools/pad/putcode.html. ( entre "C6R3" as model)


5. Total NAND flash capacity:32Gb
6. Screen resolution: 2048x1536

what do u think can i use system.img from your 16gb version?
thanx

https://mega.co.nz/#!0JQzQKJB!nkvzkjMJ0Vdi7-m8GM2sBEf0ZL_OBbRwJOI9gedaNck

firmware
thanx

[rrileypm]

Thanks for the link. I will work on this over the next few days.

[rrileypm]

https://mega.co.nz/#!0JQzQKJB!nkvzkj...bRwJOI9gedaNck
firmware
thanx

Alright, Hocuspocus69, here is your ROM. This is for the Teclast T98 4G.

Since I don't own one of these tablets, you will have to be the first tester.

All of the cool stuff is in the RileyROM folder. Changes made to boot.img and system.img.

You can use the SP Flash Tool provided in the ROM kit, or the one from the factory firmware.

Included in the kit are two alternative recovery images. One is a test TWRP Recovery...if it boots as stock recovery, there's something wrong with the tool I used to make it. The other one is a CWM Recovery I tried to make with MTKDroidTools....again, I don't know if it works or not. So I'm anxious to hear a report.

Just follow the instructions in the First Time User's Guide in the root folder of the ROM kit, among all of the SP Flash Tool files.

Download

If you report positive results, I will start a new thread for further discussion of this ROM.

[hocuspocus69]

Alright, Hocuspocus69, here is your ROM. This is for the Teclast T98 4G.

Since I don't own one of these tablets, you will have to be the first tester.

All of the cool stuff is in the RileyROM folder. Changes made to boot.img and system.img.

You can use the SP Flash Tool provided in the ROM kit, or the one from the factory firmware.

Included in the kit are two alternative recovery images. One is a test TWRP Recovery...if it boots as stock recovery, there's something wrong with the tool I used to make it. The other one is a CWM Recovery I tried to make with MTKDroidTools....again, I don't know if it works or not. So I'm anxious to hear a report.

Just follow the instructions in the First Time User's Guide in the root folder of the ROM kit, among all of the SP Flash Tool files.

Download

If you report positive results, I will start a new thread for further discussion of this ROM.

thanx a lot but you need to wait until it'll arrive... 1 week I hope!!!

[wnervhq]

1. Brand Name : Ainol
2. Model Name/Number: BW1 Talos II
3. Which MTK chip is installed :MT8382 ... but the firmware says MT6582 ?¿?¿
4. Link to stock firmware or a ROM dump from your device
http://www.ainol.com/plugin.php?iden...downloadid=157
5. Total NAND flash capacity
6. Screen resolution
1024x768

MTK8382 1.3GHz, Mali400MP2(2 ядерный), RAM 1gb, flesh 16gb, Android 4.2.2

http://www.ainol.com/plugin.php?identifier=ainol&module=product&action=info&productid=92

please my main problem is the touchscreen is goodix GT928 I'm not sure of the specific model because it looks blurry on the chip, but if it is goodix
I installed another rom my tablet and lost the touchscreen
i backup my imei codes
please helpme

[rrileypm]

I will work on this later today. Stay Tuned.

[rrileypm]

1. Brand Name : Ainol
2. Model Name/Number: BW1 Talos II
3. Which MTK chip is installed :MT8382 ... but the firmware says MT6582 ?¿?¿
4. Link to stock firmware or a ROM dump from your device
http://www.ainol.com/plugin.php?iden...downloadid=157
5. Total NAND flash capacity
6. Screen resolution
1024x768

MTK8382 1.3GHz, Mali400MP2(2 ядерный), RAM 1gb, flesh 16gb, Android 4.2.2

http://www.ainol.com/plugin.php?identifier=ainol&module=product&action=info&productid=92

please my main problem is the touchscreen is goodix GT928 I'm not sure of the specific model because it looks blurry on the chip, but if it is goodix
I installed another rom my tablet and lost the touchscreen
i backup my imei codes
please helpme

I'm unable to download this file. Can you post it from an alternate location...like Google Drive, or somewhere?