[ROM] QUICKSHOT V3.1 by The Nitro Team for Minix Neo X7

[Niklas_]

Xbmc libstagefright

Hello again

Rsok and leolas thank you for the fast reply, another qestion when i run 720 and 1080 videos on xbmc the picture gets stuck after 10min. i read on the internet that it had something with the hardware acc to do, so i wiched off libstagefright and it is working but the videos became more choppy. is there any fix for this problem. i run the installed xbmc version from your rom.

Thank you

[hambergj]

Anyone experienced "type password to decrypt storage..." problem with QS3.1?

Hi!
I helped a friend to change rom for his Neo X7 recently to QS3.1 (fantastic ROM btw!!!) and setup XBMC.

We put back the X7 in the box and he went home with it! At his home when he powered up his X7 he got at screen telling him to "type password to decrypt storage.."

I believe he fiddled with a usb-stick during first startup but even after a new ROM restore process the problem is still present. No encryption have been configured.

I'll guess this is a general Android question but just wanted to hear if anyone else had the same problem and/or if this can be hardware problem...

Have seen some problems like this with Nexus 7 but no cases with the NEO X7.

My own X7 with QS3.1 works like a charm... Thank's for a great job Nitro Team !!!

/J

[leolas]

Note: Daemonium advice me that minix xbmc has other check active, so with build.prop edit is not enough.

[leolas]

Re: [ROM] QUICKSHOT V3.1 by The Nitro Team for Minix Neo X7

1. Leolas: perhaps you could put a quick guide in OP on editing build.prop correctly to get AirPin working? Because all it requires is one simple edit. Don't think that should be a problem legal-wise? The question comes up a lot. Once build.prop is edited it works fine...

2. I can report that I have managed to get WifiDisplay (Miracast) working on QS3.1 using (http://www.freaktab.com/attachment.p...8&d=1389939370) version of the APK and with an LG Optimus G (stock), and LG G2 (stock) KitKat ROMs.

I could not get it working using Cyanogenmod etc. Only with Stock ROMs.

It doesn't work quite as well as using my LG Miracast dongle - using the X7 the stream is a bit choppier. But it works OK.

(Does anyone know if there is an update verson of the WifiDisplay app on the new Minix "Kitkat" ROM?)

3. Team, any possibility of adding all the root/HDMI detection blocking low level features that Minix have put in the latest stock ROM? E.g. release keys v test keys, etc, see here http://minixforums.com/threads/4-4-f...se.8699/page-7

4. Has anyone tried SPMC on this? freaktab.com/forumdisplay.php?139-Minix-X7-etc

http://spmc.semperpax.com/

"

• Rockchip enhancements
  • Better H/W acceleration via private API"

1. To got minix xbmc working you only need to edit in /system/build.prop and put the default values that comes with MINIX x7 stock ROM.
2. Wifidisplay apps from rk don't work for me in my moto g device. I think they don't works really ok in any device, it works erratic, some times works, some not.
3. We are studing it for 3.2
4. We didn't test it yet. But with next 3.2 we will test all xbmc versions we found, we will test this one too, thanks.

no exfat support.
i have tried to flash different kernels butno luck for me.

Time ago I formatted a USB pen to extfat and it was detected for the x7. I will test it again.

Hello

First let me say thank you for the QS firmwares they are wonderful.

now my question, i have a minix x7 and i upgraded from QS v2 to v3.1 (made a full recovery installment) it went very good no issues at all. but after downloading alla my apps and arraging them i found a "bug" on the home screen down right i cant put any shortcuts. for example if i put a shotcut like dolphin browser (see picture the red square) and restart the system it disappers. and it is ony 1 square in the home screen that resets. i have tried to reinstall the FW with no luck, no other changes has been made. can you help me ?


[ATTACH=CONFIG]7235[/ATTACH]

Thank you

Same problem

Is a bug from Launcher stock launcher, like rdsok said please try Nova launcher (very similar to stock one but more customizable) or other one from the market.

Hello guys, thanks for the amazing work! Keep it going!
I have a noobie question:
How can I choose the best kernel option? I have absolutely no idea of which one choose...

Like rdsok said stock values is enough for most users.

I tried the one with ram@720 (looks a stable setting) and cpu@1700.
CPU freq can be limited easily if any problem occurs.

I use for daily 1080p cpu1700 DDR 720 and GPU 600h

[Soul Reaver]

Hello guys, thanks for the amazing work! Keep it going!
I have a noobie question:
How can I choose the best kernel option? I have absolutely no idea of which one choose...

I tried the one with ram@720 (looks a stable setting) and cpu@1700.
CPU freq can be limited easily if any problem occurs.

[rdsok]

Hello

First let me say thank you for the QS firmwares they are wonderful.

now my question, i have a minix x7 and i upgraded from QS v2 to v3.1 (made a full recovery installment) it went very good no issues at all. but after downloading alla my apps and arraging them i found a "bug" on the home screen down right i cant put any shortcuts. for example if i put a shotcut like dolphin browser (see picture the red square) and restart the system it disappers. and it is ony 1 square in the home screen that resets. i have tried to reinstall the FW with no luck, no other changes has been made. can you help me ?


[ATTACH=CONFIG]7235[/ATTACH]

Thank you

I don't recall hearing of this issue with the stock launcher before... but it's an easy workaround... use another launcher such as Nova or similar.

[rdsok]

Hello guys, thanks for the amazing work! Keep it going!
I have a noobie question:
How can I choose the best kernel option? I have absolutely no idea of which one choose...

The default kernel is what most people will need... any OC'd kernel will require that you test each one to make certain your system is stable at those speeds... if you do try to OC, start with the lowest and work up until the tests indicate errors and back off one or two speeds lower.

[lejawin]

Thanks!

Hello guys, thanks for the amazing work! Keep it going!
I have a noobie question:
How can I choose the best kernel option? I have absolutely no idea of which one choose...

[ballicali]

Hello

First let me say thank you for the QS firmwares they are wonderful.

now my question, i have a minix x7 and i upgraded from QS v2 to v3.1 (made a full recovery installment) it went very good no issues at all. but after downloading alla my apps and arraging them i found a "bug" on the home screen down right i cant put any shortcuts. for example if i put a shotcut like dolphin browser (see picture the red square) and restart the system it disappers. and it is ony 1 square in the home screen that resets. i have tried to reinstall the FW with no luck, no other changes has been made. can you help me ?


[ATTACH=CONFIG]7235[/ATTACH]

Thank you

Same problem

[Niklas_]

disapering icons on the home screen

Hello

First let me say thank you for the QS firmwares they are wonderful.

now my question, i have a minix x7 and i upgraded from QS v2 to v3.1 (made a full recovery installment) it went very good no issues at all. but after downloading alla my apps and arraging them i found a "bug" on the home screen down right i cant put any shortcuts. for example if i put a shotcut like dolphin browser (see picture the red square) and restart the system it disappers. and it is ony 1 square in the home screen that resets. i have tried to reinstall the FW with no luck, no other changes has been made. can you help me ?




Thank you

[ballicali]

exfat

no exfat support.
i have tried to flash different kernels butno luck for me.

[lachyzee]

1. Leolas: perhaps you could put a quick guide in OP on editing build.prop correctly to get AirPin working? Because all it requires is one simple edit. Don't think that should be a problem legal-wise? The question comes up a lot. Once build.prop is edited it works fine...

2. I can report that I have managed to get WifiDisplay (Miracast) working on QS3.1 using (http://www.freaktab.com/attachment.p...8&d=1389939370) version of the APK and with an LG Optimus G (stock), and LG G2 (stock) KitKat ROMs.

I could not get it working using Cyanogenmod etc. Only with Stock ROMs.

It doesn't work quite as well as using my LG Miracast dongle - using the X7 the stream is a bit choppier. But it works OK.

(Does anyone know if there is an update verson of the WifiDisplay app on the new Minix "Kitkat" ROM?)

3. Team, any possibility of adding all the root/HDMI detection blocking low level features that Minix have put in the latest stock ROM? E.g. release keys v test keys, etc, see here http://minixforums.com/threads/4-4-f...se.8699/page-7

4. Has anyone tried SPMC on this? freaktab.com/forumdisplay.php?139-Minix-X7-etc

http://spmc.semperpax.com/

"

• Rockchip enhancements
  • Better H/W acceleration via private API"

[silverplated]

Yes, we made it works for the qs2 (qs2 was a mod of the minix official rom), but we are not sure if it is 100% legal because V3 are a complete different rom so we didn't include it in V3 versions of the rom, (In qs2 we included it only for minix devices); sorry a lot but if we are not sure that is 100% legal to include it, we don't include

leolas

thank you very much for clarification! i understand your reasoning!

[leolas]

thank you for your help. that's what i've already encountered. but i thought i did it wrong. with quick shot's prior rom i could use this airplay pro app as far as i remember.

edit: was this something i could have installed with this quick flash thing?

Yes, we made it works for the qs2 (qs2 was a mod of the minix official rom), but we are not sure if it is 100% legal because V3 are a complete different rom so we didn't include it in V3 versions of the rom, (In qs2 we included it only for minix devices); sorry a lot but if we are not sure that is 100% legal to include it, we don't include

leolas

EDIT: A new pack of kernels will be launched in the next days, Thanks to wasser help, we have mic input problem solved.

[silverplated]

The Airplay Pro app that is included with the Minix ROM itself is licensed only for use on their ROM... you can purchase it on the Play Store if you wish to use it on other ROM's.

Other Rockchip apps can be downloaded and installed if you wish... see the second post in the thread for a link to those.

thank you for your help. that's what i've already encountered. but i thought i did it wrong. with quick shot's prior rom i could use this airplay pro app as far as i remember.

edit: was this something i could have installed with this quick flash thing?