[ROM] QUICKSHOT V3.1 by The Nitro Team for Minix Neo X7

[burton24]

Hi Leolas, Nitro team,

i've been trying for a while to recompile a kernel of my own without much luck. I'm only interested in getting a driver for my touchscreen in.

May I ask that one of you guys take those 2 files, and compile your kernel with them by any chance?

I would really, really, really appreciate!!! Beer would be on me next time for sure...

thanks

HID_source.zip

[willynanita]

Sorry for the late answer.

Have you tried the init.d script that comes with ROM to mount cifs points?

I haven't, I don't know where to find it or use it.

EDIT: I just read this on the first post: "NFS example script included under /system/etc/init.d , just edit to suit your needs and you will have your nfs shares mounted every boot."

I will try that.

[rdsok]

Just to be clear... the quotes were messed up starting with dashdot's post ( they had edited them incorrectly, messing up the quote tags )...

I didn't ask for the info... dashdot had. So both my own reply ( which I've now fixed the quote on ) and leolas's are directed at dashdot and say the same thing.

[leolas]

Re: [ROM] QUICKSHOT V3.1 by The Nitro Team for Minix Neo X7

i have downloaded the firmware a few times no change
the wifi is stuck on turning on

my wifi works on other roms but i prefer qs3.1

Make certain you are getting the proper ROM for your device... the X7 and the X7 mini use different wifi/bluetooth chips which is why there is a QS3.1 for each one.[/QUOTE]
Right. Xu and x7 mini has his own ROM and kernels packs.

Reflash, maybe a bad flash.

i have downloaded the firmware a few times no change
the wifi is stuck on turning on

my wifi works on other roms but i prefer qs3.1[/QUOTE]
Are you sure that it is a real x7?

[rdsok]

i have downloaded the firmware a few times no change
the wifi is stuck on turning on

my wifi works on other roms but i prefer qs3.1

Make certain you are getting the proper ROM for your device... the X7 and the X7 mini use different wifi/bluetooth chips which is why there is a QS3.1 for each one.

[dashdot]

Reflash, maybe a bad flash.[/QUOTE]


i have downloaded the firmware a few times no change
the wifi is stuck on turning on

my wifi works on other roms but i prefer qs3.1

[leolas]

Re: [ROM] QUICKSHOT V3.1 by The Nitro Team for Minix Neo X7

Sorry for the late answer.

I am trying to mount a shared folder using cifsmanager but I keep getting "invalid argument" error. My setup is as follows:

share path: smb://10.0.0.9/sharename/
mount point: /mnt/cifs/
username: guest
password:
options: none

I can see the cifs folder where it should be, but I doesn't work, I keep getting the error.

Any help will be appreciated.

Have you tried the init.d script that comes with ROM to mount cifs points?

Hello! I've been using Quickshot v2 for a while now. I tried updating to v3 BUT I cannot seem to install the driver properly on Win7. I have spent hours reading and following different forums for a solution and I stil can't get it to work!

My computer doesn't really recognize the Minix X7 properly. Rkdevicemanager and all the other devicemanagers can't detect the x7. Windows can... but the drivers are not properly installed. I tried uninstalling the drivers to install the proper drivers but it doesn't work... it just either says I have the latest drivers or they can't find the drivers when I direct them to the driver folders.

Pleeeeze help me.

Please, try the steps in the video from the first post carefully, it works always for me, if the x7 is not recognized, change the USB cable, change the USB port, or try in other PC.

Hi to all. I am using x7 neo minix, which i bought with firmware 008 and i "installed" quickshot 3.1 custom rom..
I am fairly new to andorid devices, xbmc, Minix neo x7 and using custom roms.


I was wondering, can i upgrade to 011 version of firmware for x7 minix neox7, and do i lose all my settings, setups and installed apps by doing that?


Or does this quickstot v3.1 custom rom has upgrade to 011 firmware embedded inside?

When you flash an official firmware, you always loose your settings.

Hi I have installed QS3.1 on a few minix x7´s
but i have tried to install it on another x7 and i can get wifi to turn on
any advice?

Reflash, maybe a bad flash.

[dashdot]

Hi I have installed QS3.1 on a few minix x7´s
but i have tried to install it on another x7 and i can get wifi to turn on
any advice?

[hreich]

question about firmware 011

Hi to all. I am using x7 neo minix, which i bought with firmware 008 and i "installed" quickshot 3.1 custom rom..
I am fairly new to andorid devices, xbmc, Minix neo x7 and using custom roms.


I was wondering, can i upgrade to 011 version of firmware for x7 minix neox7, and do i lose all my settings, setups and installed apps by doing that?


Or does this quickstot v3.1 custom rom has upgrade to 011 firmware embedded inside?

[YOHANP]

Hello! I've been using Quickshot v2 for a while now. I tried updating to v3 BUT I cannot seem to install the driver properly on Win7. I have spent hours reading and following different forums for a solution and I stil can't get it to work!

My computer doesn't really recognize the Minix X7 properly. Rkdevicemanager and all the other devicemanagers can't detect the x7. Windows can... but the drivers are not properly installed. I tried uninstalling the drivers to install the proper drivers but it doesn't work... it just either says I have the latest drivers or they can't find the drivers when I direct them to the driver folders.

Pleeeeze help me.

[willynanita]

Need help using cifsmanager on this rom

I am trying to mount a shared folder using cifsmanager but I keep getting "invalid argument" error. My setup is as follows:

share path: smb://10.0.0.9/sharename/
mount point: /mnt/cifs/
username: guest
password:
options: none

I can see the cifs folder where it should be, but I doesn't work, I keep getting the error.

Any help will be appreciated.

[neodoom]

Hello,is there any possibility of native support of ps3 controller bluetooth in next version?

thx for all uour work,i love my qs3

use sixaxis app its that easy! and it works perfectly with this version qs

[daemonium]

Re: [ROM] QUICKSHOT V3.1 by The Nitro Team for Minix Neo X7

Hi dears.

If you remember i had screen scaling problem and i tried all kernels and many cables.
Finally my problem solved after buying this cable http://www.aliexpress.com/item/VENTI...471278947.html
this is not advertisment. only info for them who have this problem.

Thank you for letting us know

[SUNUN]

scaling problem solved

Hi dears.

If you remember i had screen scaling problem and i tried all kernels and many cables.
Finally my problem solved after buying this cable http://www.aliexpress.com/item/VENTI...471278947.html
this is not advertisment. only info for them who have this problem.

[fabeer]

Hello,is there any possibility of native support of ps3 controller bluetooth in next version?

thx for all uour work,i love my qs3