MK902 - KitKat 4.4 - SMIC717394 ---- 1080p and 720p ROMs

[play]

For the809III try this 2 kernels, 1.6 and 1.7. Is a long shot since I dont have the config, the sdk or the device to test it. I set the frequency to maximum always. Also download the app included and try to see whats the max cpu it shows and try to set it to max.

No-Frills APP
Kernel1.6
Kernel1.7

smic hello .. thank you for having worked in these kernels but unfortunately I tried to flash but the result is always the same as your other kernel .. I can not understand why only with your kernel I get this problem fixed at 1.4GHz
as I said I hoped so much there I could to the fact that the kernel d33 does not boot on my own. but today I did an experiment,
I took your 1.7 kernel that on my run at 1.4 and I tried to patch it with overclockomatic, and although it gives me this warning:
Reading kernel image
Done!


Searching GPU frequency limit cap
Warning: unable to patch the GPU frequency limit cap!
Searching GPU frequency limit cap (reversed)
Warning: unable to patch the GPU frequency limit cap (reversed)!


7-8-8 as table setting and taking only kernels that have overclocked_ cpu gpu stock_ddr I find some good stock kernel, because the ones where the gpu and ddr overclockomatic to have tried to overclock cpu frequencies as wrong.
but those who reported they overclock cpu_ gpu stock_ddr stock running good ddr at 800 about the gpu would not know how to tell if it is overclocked.


so now I have the following kernel 1080p working:
cpu1600_gpu? _ddr800
cpu1700_gpu? _ddr800
cpu1800_gpu? _ddr800
cpu1900_gpu? _ddr800


I do not know if technically it corrupts something but I have to say it runs quite smoothly in 1800ghz, unfortunately, is the only solution I've found

[play]

I have the same problem. I had an MK809III with true RK3188 (still have this one), and recently gave away a few with RK3188T's.

The RK3188T's will take all the current kitkat firmwares no problem - I installed Quickshot 3.1 on them before giving them away. It's ironic, since I almost returned them for being RK3188T.

My MK809III with true RK3188 will only work with Jellybean roms, or Neomode's KitKat (720P).

If you care about 1080P more than you do KitKat - I recommend installing SMIC717394's 1080P Jellybean rom. It's the best that I've found yet for my stick. Every few hours I have an app (mostly netflix) force close, but otherwise it's very fast at 1080P.

I still hope Neomode will fix/update his rom someday.

Thank you for your advice in fact I like you I used this rom of finless smic or 2, but I'm looking for a solution to have kitkat to 1080p from me only because the kernel does not boot while d33 with those of smic I have the problem that also using the overclock kernel I do not ever correspond to the value of overclocking but still 1.4
I recommend you try it too this new rom to 1080p smic, the kernel you can try one of those that I just created with overclockomatic runs pretty well
although the report cpuxxx_gpustock_ddrstock the ddr is 800mhz try these with the rom posted above smic

[smic717394]

smic hello .. thank you for having worked in these kernels but unfortunately I tried to flash but the result is always the same as your other kernel .. I can not understand why only with your kernel I get this problem fixed at 1.4GHz
as I said I hoped so much there I could to the fact that the kernel d33 does not boot on my own. but today I did an experiment,
I took your 1.7 kernel that on my run at 1.4 and I tried to patch it with overclockomatic, and although it gives me this warning:
Reading kernel image
Done!


Searching GPU frequency limit cap
Warning: unable to patch the GPU frequency limit cap!
Searching GPU frequency limit cap (reversed)
Warning: unable to patch the GPU frequency limit cap (reversed)!


7-8-8 as table setting and taking only kernels that have overclocked_ cpu gpu stock_ddr I find some good stock kernel, because the ones where the gpu and ddr overclockomatic to have tried to overclock cpu frequencies as wrong.
but those who reported they overclock cpu_ gpu stock_ddr stock running good ddr at 800 about the gpu would not know how to tell if it is overclocked.


so now I have the following kernel 1080p working:
cpu1600_gpu? _ddr800
cpu1700_gpu? _ddr800
cpu1800_gpu? _ddr800
cpu1900_gpu? _ddr800


I do not know if technically it corrupts something but I have to say it runs quite smoothly in 1800ghz, unfortunately, is the only solution I've found

Try this kernels, dont overclock them or anything, you should get 1.6. let me know. Also, maje another thread if you want, this thread is for MK902, we keep puting kernels for other units here we just going to confuse people. Either send me message or open anothe thread. thank you.

Kernels 809III

[play]

Try this kernels, dont overclock them or anything, you should get 1.6. let me know. Also, maje another thread if you want, this thread is for MK902, we keep puting kernels for other units here we just going to confuse people. Either send me message or open anothe thread. thank you.

Kernels 809III

ok thank you very much I try and let you know :-) I'm sorry for the confusion so you're absolutely right

[Finless]

I got my MK902 a few weeks back but have not even played with it yet. Too busy! But it caught my eye last night and I was going to see whats available.

I am going to try this ROM on it

FYI smic, I stickied your 2 ROM posts! Congrats on the ROMs

Bob

[smic717394]

Hi Bob, Thank you. I have a new version will upload later, more drivers for keyboard, joysticks. New kernels and a kernel for older TV's where no sound is output.

[KingSombra]

I've been using these for a while now and my browser issues seem have gone away.

[veganboy]

Hi guys,

This are the latest stable roms for the MK902. You have 1080p rom and 720p rom, extra kernels for each and for those who prefer one file update same as the stock you can download the firmware version of each rom.

The 1080p ROM

• Kitkat 4.2
• HD resolution (1920x1080) - 1080p
• 1.8V LCD support (to prevent flickering HDMI on some units especially the RK3188T)
• Proper root
• System debload
• Installed the following apps: AnTuTu Benchmark, Beyond XMBC, MX Player and Codec, Reboot, Text Droider dpi and YouTube
• VsyncFix - to fix the skipping frames on video playback
• DTS and 5.1 AC3 pass-through support
• Busybox and supersu updated
• Tcp tweaks added

Download 1080p ROM Style and Kernels

Download 1080p FW Style (one update.img file)


The 720p ROM

• Kitkat 4.2
• HD resolution (1280x720) - 720p
• 1.8V LCD support (to prevent flickering HDMI on some units especially the RK3188T)
• Proper root
• System debload
• Installed the following apps: AnTuTu Benchmark, Beyond XMBC, MX Player and Codec, Reboot, Text Droider dpi and YouTube
• VsyncFix - to fix the skipping frames on video playback
• DTS and 5.1 AC3 pass-through support
• Busybox and supersu updated
• Tcp tweaks added

Download 720p ROM Style and Kernels


Download 720p FW Style (one update.img file)


I tested everything and monitor the temperature for few days for each kernel and everything works as it should. I hope you guys like it and I hope I updated the correct files, its been few mad weeks.

Thank you to all Freaktab users and for those who like my rom.

Special thanks to:

Michelle from Rikomagic
scooter2014
leolas
Petrus
Finless Bob
900supersport

hello there

i just wanted to ask:

what is "VsyncFix - to fix the skipping frames on video playback" ?

is it a patch? can it be applied to any android ROM? or does it have to be built in the ROM...

i tried many devices but have yet to achieve the smooth HD NON stutter NON skipped frame video playback everyone is always talking about...can it be i bought 4 defective devices one after the other? please help!!!!!!

is there a guide on how to apply this vsync patch for smooth HD playback?"

cheers

V

[smic717394]

Re: MK902 - KitKat 4.4 - SMIC717394 ---- 1080p and 720p ROMs

the problem is the RK3188, well is a combination SOC and android. my kernels have already the patch applied before compile.

But if you have an uncompressed you can apply the patch.
https://<br /> http://www.freaktab.c...t=vsync+rk3188

[scooter2014]

Once again Smic stellar Rom been testing for few days now and no issues in beyond xbmc. love it fast smooth and everything working great! Special Thanks for vid fix for all d33 making kernels fir others with that fix.

rooted yes!


love it! every rom just gets better and better.

[el_easy]

MK902 - KitKat 4.4 - SMIC717394 ---- 1080p and 720p ROMs

No version V3 for MK902?

[smic717394]

Once again Smic stellar Rom been testing for few days now and no issues in beyond xbmc. love it fast smooth and everything working great! Special Thanks for vid fix for all d33 making kernels fir others with that fix.

rooted yes!


love it! every rom just gets better and better.

Hi scooter, How are you buddy, thank you again, I´m getting addicted to your good feedbacks.

[smic717394]

No version V3 for MK902?

Its really no point for any further upgrade on this unit at the moment, if everything works as it should. But I will release a V3 with new kernels with hdmi sound fix and OC in the sdk, modified launcher, I will change the wallpaper that Scooter dont like for a dark aluminum brush look, add a automatic start up program and a landscape/portret program. I kind left it because althow I see allot of downloads, there are very few expression their opinion, so I thought that maybe you guys dont like it.

[el_easy]

Its really no point for any further upgrade on this unit at the moment, if everything works as it should. But I will release a V3 with new kernels with hdmi sound fix and OC in the sdk, modified launcher, I will change the wallpaper that Scooter dont like for a dark aluminum brush look, add a automatic start up program and a landscape/portret program. I kind left it because althow I see allot of downloads, there are very few expression their opinion, so I thought that maybe you guys dont like it.

Right now , I'm using ''smic717394_809III_1080p_V4.4.2_ROM_V3 '' but there is no recovery CWM / TWRP.
Does MK902 - KitKat 4.4 have CWM/TWRP or planning to include it?... I ask because I have a lot of apps backup and tweaks in Zip...Thanks

[scooter2014]

easy to install on its own. doesnt need to be in rom, Smic dont listed to that scooter guy hes a noob!