Cube Talk 9x U65GT ROM based on Cube's V 1.8 firmware of 3 September 2014

[gdp77]

Cube Talk 9x U65GT ROM based on Cube's V 1.8 firmware of 3 September 2014

I flashed the rom and all the fixes (increased the app partition too).... but when I enter the recovery i got this:
[ATTACH=CONFIG]9559[/ATTACH]
and i'm unable to flash other recovery (twrp), it said installation aborted.I flashed again the same recovery with flash tools, it succeed but it doesn't change anything.
The tablet works fine but i have to figure it out, please help.
thanks

I would try to reflash the whole ROM, using "download & format" option from flash tool

Sent from my U65GT using Tapatalk

[giouncino]

do not do that!
if you set "downolad + format" option YOU MAY LOSE YOUR IMEI!!!
It is better to use "download only".

[gdp77]

He should backup imei/nvram first

[Lubyz]

Hi!
I had flashed U65GT_V1.8_20140903. in 95 % was "error brom error s_ft_download_fail (4008)"
after some experments SP flash tool stops on 0% with the same error "brom error s_ft_download_fail (4008)"
I think now problem is with battery. befor flashing tablet was charging good but now its problem.
may be i had flashed or ersed samthing wrong and its broke charging.
is way to charge batery in other way or repair broken stuff?
Maybe i need manualy charge batery and then flash rom?
sorry for may english

p.s. in recowery mode when tablet conect to laptop in devices and printers i see device "full" (2 disk drives) but can not open

[jiggaman]

do not do that!
if you set "downolad + format" option YOU MAY LOSE YOUR IMEI!!!
It is better to use "download only".

I backuped imei, but when i flash again the rom from flash tools than should I flash the fixes too(6 gig app partition, light 4%....)?

[jiggaman]

do not do that!
if you set "downolad + format" option YOU MAY LOSE YOUR IMEI!!!
It is better to use "download only".

I already backuped my imei; but when i flash again the rom from flash tools, should I flash the fixes too(6 gig app partition, light 4%....)?

[hairydog]

Which version do I have at present?

I'm happy with the setup I have now, but I'm not entirely sure what it is!

Can anyone tell me if this indicates which firmware I have?

Model number
U65GT

Android version
4.4.2

Baseband version
MOLY.WR8.W1315.MD.WG.MP.V39.P1.2014/06/18 16:45

Kernel version
3.4.67
zmchivin2@civin-All-Series #1
Tue Sep 2 13:42:24 CST 2014

Build number
0502L012_EP79-U65GTB1BMXXTDC_V1.8_20140902

[giouncino]

I already backuped my imei; but when i flash again the rom from flash tools, should I flash the fixes too(6 gig app partition, light 4%....)?

yes, you need to flash all the fixes again

[Edius]

I'm happy with the setup I have now, but I'm not entirely sure what it is!

Can anyone tell me if this indicates which firmware I have?



Build number
0502L012_EP79-U65GTB1BMXXTDC_V1.8_20140902

FW 1.8 / September 2014

[gdp77]

I just received my cube talk9x u65gt (16GB, v2.0_20141111).

I have some questions:

1) Will it be ok to flash supersport's rom, even if it is based on 1.8 firmware?

2) The latest supersport's rom is the one at the #1 post of this thread or there is an updated link somewhere else ?

3) Is there any way to make a full backup of my tablet (including stock recovery) before I try to flash a custom rom? I would prefer a full backup without rooting the tablet, so I can bring it back to factory status if I need to.

thanx in advance

[Freewaymad]

I just received my cube talk9x u65gt (16GB, v2.0_20141111).

I have some questions:

1) Will it be ok to flash supersport's rom, even if it is based on 1.8 firmware?

2) The latest supersport's rom is the one at the #1 post of this thread or there is an updated link somewhere else ?

3) Is there any way to make a full backup of my tablet (including stock recovery) before I try to flash a custom rom? I would prefer a full backup without rooting the tablet, so I can bring it back to factory status if I need to.

thanx in advance

Answer to 1 is yes, it is okay.
Answer to 2 is yes, at the first post.
Answer to 3 would be to just download the stock ROM. That would be your best bet.
Hope this helps.

[gdp77]

Answer to 1 is yes, it is okay.
Answer to 2 is yes, at the first post.
Answer to 3 would be to just download the stock ROM. That would be your best bet.
Hope this helps.

thank you.

Would you be so kind to provide me a link for firmware v2.0_20141111?

Also does anyone know if I can keep the stock rom and only flash with SP flash tool ebr1 and ebr2 from supersport's rom in order to increase my app storage?

[giouncino]

here is stock V.2.0:

https://mega.co.nz/#!3BhHlBqb!yrhBc_OIQ4L3CHHAsapDwj8gFQ1NVpRQFjAZPjmeEZI

and yes, on stock rom you can install EBR1 & 2 to increase app space, but you need to take a backup of pictures (you will lose them)

[gdp77]

here is stock V.2.0:

https://mega.co.nz/#!3BhHlBqb!yrhBc_OIQ4L3CHHAsapDwj8gFQ1NVpRQFjAZPjmeEZI

and yes, on stock rom you can install EBR1 & 2 to increase app space, but you need to take a backup of pictures (you will lose them)

thank you!

My stock rom is v2.0_20141111, not 1.8

Can I still flash ebr files from supersport's rom (based on 1.8)? Do I need to root?

[giouncino]

Yes, I did exactly the same, and you don't need to be root for that